BlackMagic ATEM Mini with the Iphone HDMI adapter

[@AngryBytesNL]

I've hooked this adapter up with my iPad Pro and made a keynote presentation a green bg. Looks great for my titles, animations, etc. I've also tried to use the iPhone to use Facetime as a video source. The problem with that is that you don't get the Facetime audio via the HDMI cable, so I switched to my iPad and used the mini jack to get the audio into the Atem Mini's Mic 2.

[@rawrasaurland3892]

Thanks

[@TimSimpson]

Thanks!

[@djekna]

I was getting annoyed with Filmic Pro showing all the dials and what-not but then I've seen your video and managed to hide the reticles / controls. Thanks so much.

[@scb2scb2]

filmmic pro has a clean hdmi out setting should resolve both issues. And allows you to use the interface for zoom, focus and do other options leaving the second monitor (the output to the atem) clean.

[@TimSimpson]

Hey Daniel! yes you're right it's come a long way in the year since I published this video - time for an update I think!!

[@yorkgunther]

Hi both Daniel and Tim! Speaking of using Filmic as a clean HDMI out, with Filmic being the only camera/photo app that I know of that presently supports Apple’s Center Stage, there is whole new reason to use the lightning-HDMI adaptor in conjunction with the ATEM Mini switchers. The current restriction of course is that one would need to use the front-facing camera (12mp, 2x zoom) on one of the newer iPads supporting Center Stage. But it’s quite intriguing to have an automated PTZ camera in the form of an iPad now available for an ATEM setup..

[@griffbrown4927]

I watched this video all the way through just because you owned that the answer we were looking for was at the end of the video - and that meant you could get more watch time. Thanks for the helpful tip

[@TimSimpson]

Awesome, thank you! :D

[@JuliusDeBerryJr]

he deserves to get something out of it. it's not easy making and editing these videos. 10 minutes of your time.... should be easy. lol

[@iSpike]

Good one mate ✌🏻 Cheers from Western Australia 🇦🇺 new sub & big thumbs up 👍🏻

[@MrMorden]

I use the CameraVision app - works fine. Try that. I used that with the ATEM mini to film a recent conference,

[@TimSimpson]

Thanks! I’ll check it out now! :)

[@chetebrown]

Came in to say that I tested this in iPhone 11 Pro Max with adapter and it worked. You made my day!!!

[@LivingSpringsAirdrie]

Im using CameraVision with the iPhone X and it has the black border still

[@Whitney.77]

Great job! Is there a way to use your phone via Atem mini but without the wires? do it in bluethooth

[@BandaRockBeats]

Hey tim, did you already tried to use multiple iphones in the atem mini? I tried with an original adapter to each one and failed.

[@princeamu]

That intro sounds dope. Great stuff and thanks

[@mudbrats]

I tried to use the HDMI adapter on an iPad mini to use as a sound bed into Atem mini . As sound comes out I can see it pulse on the CAM1 input bars and pulsating the same on the master out, but no sound comes into my live stream..

[@TimSimpson]

Which model ATEM mini are you using and how are you doing your livestream? i.e direct via the youtube browser, via OBS or direct from the ATEM?

[@mudbrats]

@@TimSimpson i am streaming direct. - it worked this week - so no idea why it didnt work last week

[@sanjivgupta1]

Hi, same question for Zoom: Plugging in iPad Pro into HDMI on ATEM Mini, selecting Mini as both video and audio (mic) input, seeing input bars pulsing in Zoom, but getting no sound out from the iPad Pro (video is fine). Any help greatly appreciated!

[@mudbrats]

@@sanjivgupta1 I found my finicky.... Open the audio controls and make sure the input audio for each camera/mic is actually on.... Then make sure the audio setting for microphone in Zoom is set to Black Magic. And you should be good to go. Mine works well now

[@TimSimpson]

Yeah sounds odd. I might see if I can replicate the effect

[@JarradShaw]

That was greatly appreciated! I learned so much. I use only iPhones and iPad to record multi cam, but then taking the tracks in post to edit. Live stream to use all of these is what I’m looking to do. I’m hoping hardwiring to something like the atem is more what I want to do than using Teradek or switcher or cinamaker

[@StarlightUkes]

Thank you for the info. You have a great personality 😊

[@DAVEDigitalandVinylExpert]

You may want to check out the app called shoot. It provides a clean feed and may help with the iPhone 11

[@KeetonMusic]

Nice job. I am with you on finding and trying apps and getting video from the iPhone to switchers. I don’t have the specific link, but I did find out that the Apple HDMI adapter does not even reach 1080 resolution. It was like finding out your best friend lied to you 🙄. I subscribed and look forward to watching your videos.

[@zachcruz9516]

I think the Atem Mini converts it for you.

[@Stakewithnerd]

Hey can you do picture on picture with one being the phone, and one being the computer screen or camera. Can you screen share the phone, like if I wanted to cut to a calculator ?

[@fengkayeuropevlog2606]

Nice presentation Tim.. thanks for sharing

[@TimSimpson]

Very welcome!

[@GaryStockton]

Interesting test. I wonder if iPads would act same way

[@johnmanderson2060]

What about starting the app in landscape mode instead of rotating after ?

[@PeterSpragueMusic]

Loved the vid Tim! You're a digital hero! I'm trying to use the iPhone 6 as an additional cam for my band's livestream concerts. It all works but the HDMI output from the phone has a ton of latency, way more than my other cams. It's sort of a deal breaker. I did notice latency in your vid too so do you have the same issue? Any workarounds? Thanks for sharing your knowledge.

[@TimSimpson]

Yeah there is substantial latency which isn’t great when streaming. Matching cameras is always the best answer there. The newest versions of filmic pro have reduced latency but it will always be there to some degree

[@PeterSpragueMusic]

@@TimSimpson Thanks Tim and yeah, bummer about the latency. Latency kills the music! Now I'm using GoPro's instead...stay well, P

[@lovedandfound0722]

Hello Tim, Esther any way to have this connection via-wifi and not the cdmi direct to the item mini ? Thanks for the video

[@TimSimpson]

Only via a sender reciever like the Mars 400s Pro from Hollyland

[@COMMANDERVLOGS1]

I am gonna have to learn about this ATEM thing. Seems pretty cool. 😎

[@TimSimpson]

I’m keen on working out how to use it in conjunction with OBS effectively

[@aldecoafotografia9877]

Would this work witj ATEM Television studio (non HD) it only supports 1080i

[@mr.crackdvd9121]

It does flip it side ways as long as u click the unlock switch screen thingy. But what u can't do is get rid of on the 11 is the record button and words it's annoying. But I will definitely be using filmic pro from now on.

[@doggoTvs]

nice video Tim.. tell me something did you manage to find a way to remove the side blackbars?

[@TimSimpson]

I did! Check out my recent few videos and you’ll see an update in there

[@mdbphotographycinematograp2092]

Hi Tim, Do you know if it is possible to add a Wi-Fi connection from a DJI Pocket Osmo to the Black Magic Atem Mini? Thank you for any guidance you could offer.

[@ElSantoRosarioDiario]

HELLO, EXCUSE HOW COULD YOU CONNECT A GOPRO HERO 8 TO THE ATEM MINI WITHOUT THE MEDIA MOD?

[@TimSimpson]

Good question. I’ll work that out for you. I do have the mod btw ;)

[@rachelbestcine1794]

www.aliexpress.com/item/4000954825130.html

[@WIALLIFE]

I luv da music ina intro....enjoy ur day Tim...

[@TimSimpson]

The music is from Ryan Little. Brilliant composer. Link to his stuff is in the descriptions:)

[@strugglenetworknews1215]

Aye that intro music slaps. You got great taste fam!

[@TimSimpson]

The sounds are all Ryan Little - something for everything

[@StevieWilliamsMusic]

Hi Tim ... did you manage to find away to use iPhone 11 pro with ATEM Mini Pro and show full screen of image? Thank you for your all your videos! .. any updated conclusion on this Tim? Thank you.

[@TravisWhiteTribe]

This is my question too....

[@greg_lamontagne]

Travis Try turning the camera with the camera lens on top. So rotate to the left as you’re reading this. Might work. Made a video and had it on the bottom and it would not rotate.

[@TravisWhiteTribe]

@@greg_lamontagne Will give it a try but the main issue is it does not display the whole screen....but will see....will let you know if it works ✌️👍🤘

[@ZyxxyDigitalMedia]

Thanks, Tim. Like what you're doing here!

[@JaredBenavente]

Thank you for this, If I do not have a recorder but am wanting to use my iPhone as a camera and then switch to my laptop to show various things on there can I record to my phone?

[@TimSimpson]

Yes! You can use the iphones built in camera app to record, and your laptop will have a screen recorder too. Then you will be able to transfer the phone video to the laptop to include in an edit.

[@JaredBenavente]

@@TimSimpson Thank you and thanks for your content! This really helps me not waste time and money as I'm starting out. Look forward to your future content.

[@JaredBenavente]

@@TimSimpson so I just tried a test run and failed. My goal is to use my iPhone XR as primary camera and be able to cut to my laptop to show various things using the atem mini. Also I want to reduce editing needs. Right now I have the iPhone connected to the hdmi 1 on atem mini via the adapter then my laptop connected to hdmi 2 on mini. My laptop is also connected to the usb C. With this set up can I just record to like OBS or something straight to my laptop or do I need additional hardware?

[@unpopularopinionz]

I think you have to open the camera app after turning your phone sideways

[@YengsFamVlog]

i will try this on my phone, nice content very informativee

[@TimSimpson]

How did it go for you?

[@conceptdevices]

Great informative video chum, thanks for the info Tim. Maybe you could do a little test if you have the adaptors at your disposal. Using the results of this video to start with, but also adding the Apple (normal) Camera kit (with USB port) to the lightening port on the HDMI kit, to see if you can use the USB port accepting audio from a audio interface usb output. This may solve the audio latency based on the fact that the iPhone is now being used as the camera with its images sent down HDMI to the Atem mini but it’s audio being delivered to it from the audio interface, and making this camera the main audio feed through the Atem Mini. You can also use the spare lightening port on the normal camera kit for powering up from a charger etc. would be interested in the watching your results!

[@fredrikmixer]

Hi Tim, great stuff! Greetings from Sweden!!

[@TimSimpson]

Thanks Fredrik!

[@Giorginho]

What app are you using

[@brianf995]

Try with LiveAir Solo

[@TimSimpson]

I just posted a video about live:air solo! Thank you!

[@rachelbestcine1794]

www.aliexpress.com/item/4000954825130.html

[@mr.lorenzo9385]

Watching your amazing video tanod ni zin omeng

[@TimSimpson]

Thanks Mr Lorenzo! I hope it’s useful!

[@filipgreenwich8691]

What app do i need to run on the iphone - if i just connect the phone and go into video mode , the preview in atem mini software literally shows the iphone in portrait mode rather than just taking over the cam?

[@TimSimpson]

There are a few apps that work but the best one to get is Filmic Pro.

[@chase6390]

Is there a link to the adapter? HDMI to lightning cord itself didn’t work and I don’t wanna spend $45 on apples adapter. Is an Amazon one okay to use? $20 vs $45

[@DoutoraCozinha]

Thanks!

[@TimSimpson]

Welcome!

[@sonicultura]

Hi man! Thanks for your videos! Is DJi Osmo working with Atem Mini directly as well? Thanks man!

[@hugotrevino2565]

Great video!! Thanks a lot!!

[@TimSimpson]

Glad it helped!

[@chrisj5643]

Is there any settings to get your iPhone to show in your atem? I tried everything and it won’t show! Great video by the way 👌🏼👌🏼

[@jeremystraus2728]

Same here. Hoping you get a response.

[@chrisj5643]

Jeremy Straus So I found the solution, I just purchased another lighting adapter that doesn’t require an app to set up and it worked perfectly, also if you have an iPhone X or newer I recommend you to buy the ProMovie or MoviePro app, they output a full and clean signal to your atem, plus you are able to control white balance, exposure, Shutter and much more

[@chrisj5643]

Paul G. Im not exactly sure but it’s very similar to a dslr that outputs HDMI I’ll say like 5 to 8 frames, most of the cameras that don’t have sdi output have a delay from around 4 to 9 frames, you won’t be able to tell the difference if you have other cameras with hdmi output

[@Jarhead6]

I wonder if you can receive phone calls?

[@TimSimpson]

Yes. I found that out hte hard way when live streaming once. :P

[@voxpop7422]

Hi Time....really informative video.... i have a doubt, am a teacher, while taking class I am using iPad for writing thins.. is it possible to switch my iPad screen(notes) in ATM mini??

[@knaziringram4589]

Thank you Sir!

[@TimSimpson]

You are welcome!

[@AndrewLowes]

Do you know if filmic pro will get rid of overlays if you use the video feed coming in from DJI ronin app?

[@1LOVEML]

is it good to used the iphone 12 as camera in our vlogging? please enlighten me as i am trying to purchase new one, thanks in advance

[@TimSimpson]

Hiya - the iPhone 12 is fantastic for vlogging! I've been using it a lot recently. Even more so when you add something like filmic pro camera software and the Rode VideoMicro LE microphone with it!

[@HenokhRORY]

Hello sir, i wanna ask. What app did you use on iphone? Thanks anyway. Greetings from Indonesia

[@TimSimpson]

Hi - I've update links In the description, and will soon be making a follow up video to see if things have improved

[@FAV_AV]

Awesome video. Thanks very much! iPhone 14 also freezes on landscape.

[@FAV_AV]

My iPad does landscape no problem. I bet I'm not the first to post this lol

[@FAV_AV]

I'm thinking I could use the iPad in PIP and change the PIP size to the size of the iPad image...

[@TimSimpson]

Apple will just have to send me a 14pro max to test with (I wish) ;)

[@ProductReviewkk]

Great vid Tim!! thanx

[@TimSimpson]

You’re welcome :-)

[@rachelbestcine1794]

www.aliexpress.com/item/4000954825130.html

[@LyleWeberGenerousLifestyle]

Thanks for the great videos! If I have a blue yeti plugged into my computer and iPhone connected to atem mini my audio is slightly out. Any thoughts on how to fix that? My camera #1 is a Zv1 and it’s syncs great and immediately but camera 2 (iPhone) is slightly out of sync.

[@TimSimpson]

There is an inevitable delay in HDMI encoding/decoding. HDMI channel 1 on the encoder is designed the work much quicker and will show less delay. The phone is slower encoding as it’s done in software as well. Solutions: get a mic like the k96 from LensGo to go direct to the ATEM where you can add a delay to correct latency. Use something like OBS on the computer to correct latency

[@LyleWeberGenerousLifestyle]

@@TimSimpson thank you. I ended up getting a RCP and using it with a shure XLR now and it plugs into line 1 on atem! Ps your videos have helped me a lot!

[@commander5928]

Hey man! I’m trying to stream ps5 gameplay from my atem mini pro iso and I can’t get my party chat and game through both headphones and hdmi any suggestions?

[@Jannacek]

does it also cast the screen of the iphone directly? (i guess yes?) so, if i open an app would it show the app on the atem? thanks! :)

[@TimSimpson]

if you plug an HDMI adapter into the iphone and into the ATEM then yes, whatever you have on screen is mirrored on HDMI. It's only when you run an app like Filmic Pro which overrides the HDMI out to use the camera that it acts as a clean camera feed.

[@Jannacek]

@@TimSimpson thank you!

[@juansantoscf]

Hi Tim! I just watched the video. I have a question for you... I'm in the process to get the ATEM mini pro but I want to make sure that if I want to share the iPad screen... as a resource (NOT as a camera or a controller) I just want to show my iPad content "sharing the screen while picture and picture option" I'm going to be able to do it... If you already posted a video about it or know how to do it, could you link me the video please? thank you in advance

[@TimSimpson]

Hiya! If you’re not using one of the apps for clean HDMI then the adapters in this vid will just mirror your device screen :)

[@saracano5029]

Gracias por su información

[@kneerkat1]

Will this work with Android phone? How about a USBc webcam?

[@TimSimpson]

it will with some - I actually bought all the adapters for doing this and bought an samsung phone just to find that it's one of the models where they don't provide this functionality. So yes, if you get a phone where they have decided to allow it in software. All iphones I've tested work and I'm hoping to get a flagship-level galexy on loan from a mate this week to test with (he's replacing it with an iphone :P )

[@jorgehenriquedeoliveira9660]

Wow! I am trying it for months. None of my cell phones can be recognized by the atem. Only the cable is enough or should I open a specific app in cell phone (and setting up It)? Because I am connecting my phones with the cable you show in the video. When I open the atem software on my Pc nothing happens. It is like there is no camera connected. Maybe I am missing some step? Please help me!

[@ChefBrandonAllen]

Thank you, sir!

[@TimSimpson]

Very welcome!

[@saintmatthewsepiscopalchur6035]

Dear Tim, how did you eliminate the black frame when using the ATEM Mini, please?

[@TimSimpson]

by using the iphone 6. I'll be making a followup video soon to see what improvements have been made

[@vincenttorilli4869]

Try AirMix solo. Works for me on the iPhone 13 mini with no cropping.

[@markhepi7791]

Hey thanks Tim, I’m from NZ had my atem since November and really enjoyed your delay audio syncs videos. Probably the best testing I’ve seen so far and I’ve watched a few on YT. This maybe a stupid question but how do I switch portrait view to landscape while hooked into the atem? Do I need a app to change it? It defaults to portrait and can’t find anywhere on rotate it. I have a iPhone Xmax. Cheers

[@markhepi7791]

All good I figured it out after watching your other video. Thanks again

[@allRIDEnow]

great video gagin tim! thx... i´ve got another question. is it possible to charge the gopro 7 or 8 while i´m using the hdmi out for streaming? with the hero 5 it doesn´t work... thx

[@TimSimpson]

Thats a good question - I thing the answer is no because of heat management.

[@PastorRichRecharge]

Great video! What camera are you using to record/stream with?

[@TimSimpson]

It’s a mix, but largely a Sony A7sII, Sony RX100m5, AX53, GoPro 5,6,7,8 and 9, osmo action, and osmo pocket. Those are the main ones at least ;) oh and 3x Blackmagic Production Cameras

[@fishycomics]

8th like first commenter keep the great work up.

[@TimSimpson]

Thanks as always fish

[@drewmichael4014]

Hi Tim. I’m a new subscriber. I have the IPhone 7+ with the same HDMI adapter and the ATEM MINI. Unfortunately my phone doesn’t seem to pass thru any microphone signal when connected. If I play a KZbin video on the phone the audio plays thru the adapter but not when I’m speaking. Any ideas what the problem is please? Thanks

[@TimSimpson]

Hey Drew - I'll be looking into this in an updated video shortly!

[@drcharlesheroux]

Any ideas why it's working with my Iphone but not with my Ipad pro? Thanks!

[@jorgehenriquedeoliveira9660]

At least you got it over your iPhone. In my side I am connecting this cable but seems like my atem does not recognize my iPhone as a camera. Nothing happens. What am I doing wrong, any idea?

[@maryreed2619]

Great video Tim! You are a brilliant fellow! And I think your Intro is my favorite on KZbin...And I watch tons of videos. You and Ryan Little make a great partnership. :-)

[@TimSimpson]

Ryan is certainly a Gentleman and a Scholar. Thanks Mary!

[@marcusjocham6884]

Hello Tim, what adapter did you use? Cheers Marcus

[@TimSimpson]

Hey Marcus - I'm using the apple original lightning to HDMI adaptor.

[@markedtribe]

Question Tim... do you know if with the iPhone cable will it work with the OBS Camera app verses the filmic pro?

[@matthew-tk7yc]

What app do you use I don’t see it

[@TimSimpson]

Hey Matthew - I've updated the description, and will soon me making an updated video as so much has changed!!!

[@TimSimpson]

Btw it’s filmic pro

[@ShaneAngRacing]

Will it work if I play video/movie using the iphone and the video+sound will go to the switcher?

[@TimSimpson]

I'll say "maybe" because in theory it's just mirroring out the iphone screen - however some apps/media have DHCP restrictions and might not allow it.

[@markhepi7791]

Hey Tim when I view the filmc pro output through vmix their seems to be black bars around the video. Any way of removing and making it fullscreen?

[@TimSimpson]

Got a vid coming real soon on this!

[@rachelbestcine1794]

www.aliexpress.com/item/4000954825130.html

[@david_ha]

Any solutions?

[@david_ha]

@@TimSimpson Were you able to figure out the solution to this?

[@vincenttorilli4869]

@@david_ha I use AirMix Solo and it is full screen with no cropping. I tried a bunch of different apps (not Filmic Pro) and all of them were cropped except AirMix Solo.

[@robertcartwright00]

What's the app called? You forgot to put that info in the list above?

[@TimSimpson]

Filmic Pro - I've updated the description, and will be making an updated video soon too!

[@paulrhodes8590]

Cheers bro

[@jonathanphillips967]

Could you use a similar USB-C (3.1) to HDMI adapter to connect some cameras to the ATEM Mini, Tim? Here's my trouble: I have a Canon 70D which will not give me a clean HDMI so little point in connecting it to the ATEM. It will connect via USB though... so I'm wondering if an adapter is an option

[@TimSimpson]

when you connector a camera out to a PC over USB. the camera is emulating a webcam signal - this is what you would do when feeding into OBS for example. The ATEM mini is specifically HTML in, and so there is no way to direct connect this. You could possibly locate an appliance that converts webcam > hdmi, but this type of thing is ususally more expensive that they're worth, and end up compromising signal quality and latency

[@TimSimpson]

sidenote: some devices might be designed to use the USB-C port to output an HDMI signal hypothetically like apple do over lighting, I've not seen this myself though

[@GotKEYStudio]

can you edit the cuts once you record on the atem mini pro and bring it into premiere? does it record in iso??? is the program feed editable once you bring it into premiere? btw your AUDIO is super clean!!! lol they want everyone to buy vertical TV's lml i love it!!!

[@TimSimpson]

The Mini Pro ISO will record all raw footage, and edited output and also a Davinci resolve project. This can be edited in the free version of Resolve

[@GotKEYStudio]

@@TimSimpson lol sorry about the 21 questions lol, I ended up picking up the iso and running tests!!

[@TimSimpson]

And now the extreme is on its way! :)

[@GotKEYStudio]

@@TimSimpson funny isn't it... I'll upgrade when they come out with an ATEM Mini SDI ISO!!! 😆

[@TheFirstMillion]

very helpful, thank you

[@TimSimpson]

You're welcome!

[@iASiAChannel]

Perfect!!!

[@TimSimpson]

Thanks!

[@iracombs449]

Does this work with using an IPad ?

[@TimSimpson]

it sure does!

[@yngoanbuonya1245]

Great

[@ennedzASMR]

Sending Support from AD

[@PiyushShethswarsarita]

Hii, i have iphone 8 plus, lightning to hdmi converter and atem mini, filmic pro but i am not getting my camera, but a screen of PTVwire. Sir can you please help

[@CheskaMaeCastillo]

this guy is a liar...he is fooling everyone most of his video is misleading, the way he did will not work, you need the up/downcross converter to convvert signal from your iphone to atem

[@TimSimpson]

Sorry you feel that way. I'd like to hear more detail about your claim Cheska as I've used this set up to make a number of videos quite successfully. Please do elaborate.

[@TimSimpson]

Hi Piyush - you might need to check that filmic pro and the ATEM are both set to the same resolution and framerate. I'm looking to make a new video as well to see if there's much difference now that we've had a few ATEM and iOS updates.

[@pierrebessette7976]

Hello and thanks tor the video. Did you try “solo cam” app to get free clean hdmi? My problem is that my hdmi out is not full screen wether out of apple tv or out of adapters; anyone could suggest a solution? (If anyone has other free solutions to get clean hdmi it would be useful because solo cam does not have a lot of image control and we get overexposed easily)

[@edulitix]

Hi, why i cant use rhe camera of iphone?

[@TimSimpson]

Hey Basar - thanks for leaving your question. What model iPhone are you using and is it an apple original lightning > HDMI adaptor or a third party one?

[@edulitix]

@@TimSimpson i solve the problem 😊 now it’s working

[@TimSimpson]

@@edulitix awesome! I’m currently test g the new software versions and iPhone 12 to see what’s improved

[@Alejandro_Santafé]

there are something for android?

[@TimSimpson]

Hi Alejandro - Filmic Pro is now availalbe for android on the Google Play store. I guess I'm going to have to go get an android phone to try it out on :)

[@taoli5497]

👍

[@TimSimpson]

Thank you! I appreciate that

[@ShawnTuber_home]

Hi Tim Simpson, a new friend here from Commander Vlog. I love nature and own a parrot. Let's connect my friend. Thanks!

[@TimSimpson]

Thanks and welcome

[@yhenmediarito1492]

Great vedio@MLYNYU

[@TimSimpson]

thanks!!!

[@distancemilesaway]

A friend from commandervlogs

[@TimSimpson]

Great to see you here! :D

[@llaelsonjjoas2692]

Alguém traduz pra mim? Kkkkkkk. Precisa de algum app no iPhone? Ele rotaciona a imagem da câmera? Alguém me ajuda.

[@TimSimpson]

Oi. Filmic pro funcionará no iphone para fornecer saída HDMI limpa e eu acredito que gira para a tela alta, mas quem realmente gostaria de fazer isso! : D

[@rroorryyjj]

anyone else find their iphone only shows up in OBS etc if it's in as hdmi 1 on the atem mini pro? weird, right? (iphone 6s/obs 25.0.8/atem software control 8.2.2)

[@jenCchannel]

new friend here

[@GhostIntheShodow]

I was wondering if changing the picture ratio in FiMLic Pro setting on the iPhone might get rid of those black bars. Seems to be a screen ratio problem.

[@TimSimpson]

Sadly no, because eh it’s just straight screen mirroring

[@rachelbestcine1794]

www.aliexpress.com/item/4000954825130.html

[@saxjam]

Could it be that you have the iPhone set at 1080p instead of 4K In the camera settings ?

[@JheronTV]

very informative bro...from mommy c

[@jairo.romeroo]

I need some help

[@TimSimpson]

we all do :D ... how can I help you today (sorry about the delay )

[@TransplantHelper]

Anyone had any luck recording FaceTime audio/video with this yet?

[@andreaandkennethgaming]

thanks for sharing new friend here...can I ask to please send me too.have a nice day ahead.thanks!

[@TimSimpson]

A pleasure! Glad you found it useful :)

[@pjmuck]

Why don't you post a link to the app you're using? (Or at the very least spell it out so people download the right app). I can't understand what you're saying. is it Filmit Pro, Filmic Pro, etc. Post the link please.

[@TimSimpson]

Heya! Thanks for pointing that out - I've updated the description, and will be making an update video soon!

[@alecr.1401]

You a little green..

[@TimSimpson]

yeah colour grade at 2am is never a great plan :P

[@rachelbestcine1794]

www.aliexpress.com/item/4000954825130.html

[@julioalejo7434]

Does the lifetime license for iOS no longer exist? 🥲