Blackmagic Design UltraStudio Mini Recorder // Show and Tell Ep.3

[@DavidDiMuzio]

REALLY appreciate you making these videos. ...However, none of this is easy or intuitive, but you're making it better :)

[@darrylephraums4612]

You are effing AMAZING. Thanks for your hard work with these videos!!!!

[@heretorecord]

+Darryl Ephraums really appreciate it Darryl, thanks for watching!

[@heretorecord]

+BMG HABARI thanks! I appreciate it. Will get back to you soon

[@DavidDiMuzio]

My issue is the audio. I can't get the audio from my mic to show up in Black Magic Media Express ...you never showed how you set that up..

[@dominicpanico2682]

Any solution on this. I am experiencing the same thing.

[@massapower]

Can this be used to capture Video from a Cable PVR so i can extract the contents on to my Computer ?

[@Jason_Hermann]

Excellent work, thank you!

[@GustavoArceMusic]

I got a message Thatit say no conected. Please how to fix it

[@AlessandroGiordani]

Great Video!! Just a question... is it possible to record a GoPro HDMI video output into Media Express with Apple ProRes format? Thanks!

[@heretorecord]

Yes - that will work!

[@AlessandroGiordani]

thanks!

[@allwrightmedia]

New sub. Very efficient and thorough . Thank you!

[@NBTSMediaOgbomoso]

Hi, thanks for this. I have a Canon XA11 camcorder and I find it difficult to capture image. Tried severally but the system does not recognise the camera, any more hints please...

[@heretorecord]

You will need to use 1080i60 or 1080i50 to get it to work with that device. The other output setting is 1080p60 which will not work

[@Elleksdaily]

hey can I use 3 cameras -->> input HDMI switcher --->> UltraStudio mini Recorder --->>> Macbook pro? instead of Dslr/camcorder directly to recorder, it will pass 1st on HDMI Switcher, rather than purchasing another recorder for another video camera, is it possible? thanks

[@heretorecord]

You can indeed do that however I believe that a cheap HDMI switcher would have black frames between switching. Worth trying out though!

[@Elleksdaily]

thanks :)

[@sobhansaikishore9678]

I am using media express. If it possible capturing time audio hearing plz help me. Thank you

[@heretorecord]

I’m not sure what you mean

[@blackstone9515]

is there a workaround to record video from Blackmagic atem HD then send the output to vmix or obs where you add other overlays that are not on the recorded video out from the atem?

[@heretorecord]

You would need to either down convert the signal to 1080p25/30 or you could use a completely different capture device of course

[@kicxacademy]

Hello. Great video. I have a go pro Black 7, and i just cannot get it to work. Have you got any ideas what i may be doing wrong, or is it just not compatible. It does connect, but i cannot see no image coming through. I have a Macbook pro. Any help would be great. Thank you

[@heretorecord]

It’s tough to say without my hands on the device but it could be that the GoPro is putting out a signal over 1080p30 which is the maximum res and FPS for this device.

[@JackRabbit72380]

Do i have to have a mac? Or can i just hook it up to a thunderbolt display and not need software? Or is there software for windows?

[@camillespada943]

Hey, thanks for your work. I've download all latest update but still can't see any hdmi signal on the desktop video set up. Any ideas?

[@seanasdfghjkl]

Hi Camille, Did you find you solution?

[@francoisyouakim1417]

So I'm using the Xa11 for recording. I want to purchase this for live streaming, maybe use OBS or the blackmagic software. I am using a 2017 Imac which they converted their outlets, would I need to buy an adaptor that works with the new Imac ports? And also does it matter which HDMI cable to use?? Thank you in advance.

[@2322nemo]

Great video. I am wanting to live record from SD into media express so I can clip/edit but I am struggling with disk space. I am on a Mac so do I need to download a compressor such as ProRes or something? Thank you

[@heretorecord]

+Merideth Marsh that's a great question. I feel like you may still have issues even with a compressor as you will end up taking up more space (the original footage and the compressed version). It may be time for an external hard drive!

[@VideoArtist]

Hiya mate, my Nikon D5100 only lets me shoot for 20 minutes max, but if I use it as a web cam will I still be limited to 20 minutes at a time? Thank you.

[@heretorecord]

This may indeed work but you will want to check if your Nikon gives out a cleaner HDMI signal. This can be checked by plugging it into any HDMI tv and see how it looks

[@VideoArtist]

Thanks. I managed to get a clean HDMI using a hacked firmware. The only issue now is that when I use 1080i the image is stretched, it's as tho it's taking 4:3 and stretching it to 16:9, and if I select 720p it's like a 4:3 square sat inside of a 16:9 rectangle, fortunately in Wirecast I can crop the black bars out and zoom in, so all in all I'm pretty happy. Just out of curiosity which camera are you using in this video? I need to check out your other videos to see if you have any recommendations. Thanks for helping us all with this!

[@MrMahefx]

can we record video in prores or Prores LT quality using this device and media express... i dont want live streaming...only recording needed..???

[@UloPe]

Do you know the HDMI2USB device? It's completely open source. There was a nice presentation about it at 33C3 congress.

[@heretorecord]

+Ulrich Petri sounds very cool - it seems like it only supports video-out, whereas this is a video-in setup. Unless I am mistaken!

[@UloPe]

Here to Record no it's a capture device. It only does 720p for now though.

[@jroar123]

How do you connect thunderbolt to a pc or older Mac Pro?

[@heretorecord]

If the computer does not have Thunderbolt then I suspect you cannot connect it at all.

[@souljeriddim1816]

How can I get it to run on Windows. Since it works with Thunderbolt? Having trouble figuring it out.

[@AlexPerez-kx6vs]

halo if I wanted to connect the Blackmagic Design UltraStudio Mini Recorder to windows i have to use a thunder bolt cable to hdmi to connected to my windows pc would this work or i have to use usb

[@DongHyeongLee]

Can I use the black magic design mini recorder usb version on the iMac?

[@heretorecord]

It doesn’t exist sadly. It would be a nice device to have though!

[@jeffreyscholz9930]

How do get the desktop video utility? Everything I've downloaded doesn't have so I can't switch from SDI to HDMI

[@heretorecord]

+Jeffrey Scholz it comes on the SD card with the device. Or you can download it from the support section on the Blackmagic site

[@PelletierRD]

I need the drivers of this device of the Blackmagic Design UltraStudio Mini Recorder for Mac

[@heretorecord]

+Luis Manuel Pelletier check out the Blackmagic design site for these... www.blackmagicdesign.com/support/ and search for the product.

[@darenzd4939]

Hi is it possible to connect the Blackmagic Design Ultrastudio Mini Recorder to desktop pc?

[@heretorecord]

So long as the PC has thunderbolt then it should work just fine.

[@kcalhoun0580]

Hi are these the same as the hyperdeck shuttle?

[@heretorecord]

+kcalhoun0580 not quite. The shuttle will record to an SSD. These are used to connect a camera to a laptop/computer in order to record or stream on that computer.

[@JackRabbit72380]

Can u go full screen i wana use it for gameing?

[@MountaintopKitchen]

Hi ,, Thanks .. Do you know if the mini recorder works with the Panasonic Lumix G7?

[@heretorecord]

+Frank Stonehouse hey - it’ll work with any camera that gives a clean feed out over HDMI, does your G7 do that?

[@MountaintopKitchen]

I believe it does have clean HDMI out .... but I was thinking that there were other limitations ...

[@heretorecord]

+Frank Stonehouse that’s true. The cameras aren’t really made for live streaming technically. They can overheat and aren’t built for long term things. So if you want to do an hour long stream and have a power cable (instead of the battery) then you’ll be fine. For a long day of streaming then I would test it a lot before trusting it!

[@damianmoszyk1265]

Hey, is any chance connect this mini recorder to laptop with windows? for example: cabel thunderbolt to usb?

[@fouchefotofilmf3428]

DId you try ? can we ?

[@heretorecord]

I would recommend a different device completely. A Magewell USB capture card would work on windows.

[@damianmoszyk1265]

nopt, don't work, black magic shutter is for this

[@hallchurch4060]

Can I use a Thunderbolt to HDMI converter to attach the Mini Recorder to a Windows PC?

[@heretorecord]

+Hall Church I’m afraid now. Thunderbolt to HDMI are one way only (for connecting a monitor to your computer for example).

[@souljeriddim1816]

I'm having the same problem. Tried this and it didn't work. Do how can I get it to run on Windows?

[@raulhespinosa]

I have a Canon XF405 and is just not working, sad :( any suggestions?

[@heretorecord]

You’ll have to make sure the camera output is 1080p30 or lower

[@raulhespinosa]

@@heretorecord Thanks!

[@Fil-ThaiWanderer]

hi im using mac with software 10.11.6 but i my black magic cannot detect and the driver i cannot open any help thanks!

[@heretorecord]

+Sammy renton that might be a question for Blackmagic support I’m afraid! Sorry I can’t help out this time!

[@Fil-ThaiWanderer]

Here to Record thanks alot i try send them message

[@tennisphotography]

can you get a thunderbolt to usb adapter for windown/pc's?

[@heretorecord]

Hey - There's no need to get an adapter, You might want to check out something like the Blackmagic Intensity Shuttle or go for something like the Epiphan AV.io HD which is a USB 3.0 device!

[@tennisphotography]

Thanks for your comment :) With the Blackmagic Intensity Shuttle can you use 3 cameras (hdmi) or can you plug in 3 Mini Recorders for us PC/windows people :)

[@heretorecord]

+tennisphotography on the pc side of things, if you have three available Thunderbolt ports then you could go for the mini recorders. However I would recommend going for the Blackmagic Decklink cards if you are using a desktop pc as these will slot inside the pc and work great. If yours on a laptop then three shuttles could work but that would be a lot of stuff to carry around. Check out the Epiphan AV.io devices which are USB 3.0!

[@nolimitkil]

Can I use this on my ps2

[@Fridayth-pp3jt]

I lost the SD card comes with it what can I use to connect it to my MacBook??

[@heretorecord]

+Friday 13th you can download the software from support section of the Blackmagic Design website. Just search for the Mini Recorder and download desktop video.

[@Fridayth-pp3jt]

Here to Record I couldn't find it

[@Fridayth-pp3jt]

Here to Record can you help me with that plz Thank you

[@heretorecord]

+Friday 13th send me a message over on Facebook and I'll help you... m.me/heretorecord

[@cindhiaanne-laurecoulibaly2006]

Helle, I downloaded the software Desktop video utility but it doesn't show my Ultrastudio mini recorder. What to do ? Please

[@heretorecord]

Tell me more about your setup. What computer are you using and what camera etc?

[@cindhiaanne-laurecoulibaly2006]

Macbook Air and for the camera I use Sony Fdr Axp 35

[@heretorecord]

I see. And is there a thunderbolt port on your MacBook Air?

[@cindhiaanne-laurecoulibaly2006]

A port USB-C but I have an adaptator

[@heretorecord]

I wonder if that is the problem in this case. I’ve never tried it with an adapter. Also, if the port is not Thunderbolt then I don’t believe it will work.

[@keeelane]

Thanks but I can't find anyone explaining what it actually DOES or why you need one. Can't you just plug in hdmi straight into your computer? Why do you need this box for? Thanks.

[@LAUGHINGMAN91]

Most of the time, no - you can't plug in hdmi straight into your computer. The HDMI on a computer is there to send out the picture to a screen, they don't take any information inwards - like video from a camera. So to get camera video into your computer, just use this box connected via thunderbolt.

[@tedz2000]

Can you get this recorder to work with windows

[@souljeriddim1816]

Same question. Got one but I run on windows. I'm having trouble connecting it. 😔

[@poderdediosradiotv3183]

How do I download the Desktop Video Utility

[@heretorecord]

+Poder de Dios Radio Tv head over to the Blackmagic design site, click on support and then do a search for the mini recorder. You'll see desktop video appear at the top of the left hand section.

[@poderdediosradiotv3183]

I see their is a lot of software that say desktop video but idk which one

[@heretorecord]

+Poder de Dios Radio Tv just pick the one at the top. Those are all the versions they have released as they update the software

[@zatoichiable]

not driverless?

[@DanyFlow13]

es compatible con windows?

[@heretorecord]

+Daniel A. Matos technically it is compatible with windows so long as you have a Thunderbolt connection.