Thank you.....Holding thumbs for my umpteen mats I have that have lost all its stickiness!
@BlackSheep303Crafts Жыл бұрын
I hope this method helps you with all of those mats!
@KathleenMc738 ай бұрын
Thanks for showing the two different techniques of cleaning the mat and reglueing the mat. So often, people ask how to make their mat sticky again and they are told to strip off all the sticky and restick, when all they actually need to do is either give it a wipe with a baby wipe or give it a quick wash to refresh the sticky. 💜
@BlackSheep303Crafts8 ай бұрын
Very true. Sometimes just a good clean will do the job. But it's also nice to know the more in-depth method to re-stick a mat too. 8-)
@pennybrashears967628 күн бұрын
Thank you!
@BlackSheep303Crafts27 күн бұрын
You bet! Thanks for checking it out.
@itbeginswithinkandpaper5 ай бұрын
Thank you so much for this tip to get the mat sticky again!!
@BlackSheep303Crafts5 ай бұрын
I hope it's helpful! Thanks.
@marilynnellsworth43002 жыл бұрын
Aileen's Tack it Over and Over also works on your mats. Use water mixed with the glue and let it dry. This is what was used on the Cricut mats years ago when I first bought one.
@BlackSheep303Crafts2 жыл бұрын
Good to know. I'll have to try that method too. Thanks for the tip!
@ethannicholls3392 Жыл бұрын
Thank you so much! Was great to see how this looked start to finish
@BlackSheep303Crafts Жыл бұрын
No problem! I hope it was helpful.
@robbiegayfield5088Ай бұрын
Thanks for the tutorial. Will look for that glue.
@BlackSheep303CraftsАй бұрын
Thanks!
@manuelashannon13692 жыл бұрын
Thank you. I needed this for a fabric mat. I’m learning.
@BlackSheep303Crafts2 жыл бұрын
I'm not sure this re-stick method will work on the fabric mat since that mat is super, super sticky. Worth trying, but I'm not sure the Zig Two Way glue is sticky enough to restore that particular mat. If you try it and it works, let me know. Good luck!
@kimluptovic22802 жыл бұрын
Yay Elena, I need to do this! Thanks.
@BlackSheep303Crafts2 жыл бұрын
It's easy!
@bobriddle19652 жыл бұрын
Thank you for the cleaning instructions for the mats. While I’m a new owner - it’s nice to have this advice.
@BlackSheep303Crafts2 жыл бұрын
No problem. I hope it helps when it’s time to clean your mats. 8-)
@KathysScraps Жыл бұрын
Thank you for this tutorial, Elena. I was looking for help for this. Happy Fall 🍂🍁
@BlackSheep303Crafts Жыл бұрын
Thanks Kathy! I hope it was helpful.
@manuelashannon13692 жыл бұрын
Thank you showing us.
@BlackSheep303Crafts Жыл бұрын
You bet! Thanks.
@lindadittrich1514 ай бұрын
thank you!
@BlackSheep303Crafts4 ай бұрын
You're welcome!
@JaneDeStefano10 ай бұрын
Excellent educational moment
@BlackSheep303Crafts10 ай бұрын
Thanks! I hope it helped you.
@olubunmiosinuga7258 Жыл бұрын
Awesome tips. Thank you.
@BlackSheep303Crafts Жыл бұрын
I hope it helps you get more use out of those mats. 8-)
@WorldofMichaelTrent Жыл бұрын
Such a great vid. Clear info and easy to understand. Thanks!
@BlackSheep303Crafts Жыл бұрын
Thank you so much. I hope it helps you get more use out of your mats.
@carolynrj12 жыл бұрын
Good information just when I needed it! Thank you
@BlackSheep303Crafts2 жыл бұрын
Thanks for letting me know. I hope it helped you!
@maryflower3479 Жыл бұрын
Thank you. Very good information
@BlackSheep303Crafts Жыл бұрын
Glad you liked it. I hope it helps.
@ritacantrell3772 Жыл бұрын
Great thanks
@BlackSheep303Crafts Жыл бұрын
hanks so much!
@valerieanderson56782 жыл бұрын
Very helpful and easy to understand!
@BlackSheep303Crafts2 жыл бұрын
Thanks so much for letting me know! I hope it helps you get more use out of your mats.
@TracyJ.Martin11 ай бұрын
You can also use non-alcoholic baby wipes to clean your mats
@BlackSheep303Crafts11 ай бұрын
Good to know. Thanks!
@loreenfarmer1872 Жыл бұрын
Thanks all,helpful,aids are great totally new to,using my scan n cut but anxious,tomlearn
@BlackSheep303Crafts Жыл бұрын
The ScanNCut can feel intimidating in the beginning, but just keep playing and experimenting. It is really fun once you get the hang of it!
@Paintbug2 жыл бұрын
Thanks for making this video. Very helpful! I just ordered the glue pens.
@BlackSheep303Crafts2 жыл бұрын
I'm glad you found it useful. Those glue pens will help you get a lot more use out of the mats. Just make sure they aren't too sticky after they're dry (happens to me a lot). You can press them to a cotton shirt or lint-free towel to take some of the stick off if you need to. 😉
@KeinHollandPro Жыл бұрын
Thank you very much! Do you have to clean the tip of the gluestick? So it wont get hard?
@BlackSheep303Crafts Жыл бұрын
I never have. I wipe off any excess glue on it but that's it. Just make sure you put the cap back on and then it won't dry out.
@KeinHollandPro Жыл бұрын
@@BlackSheep303Crafts Thank your very much for your answer :)
@kristikirschnick44332 жыл бұрын
Thank you for the information!!
@BlackSheep303Crafts2 жыл бұрын
No problem. Thanks for watching and I hope it was helpful!
@carolgrey2340 Жыл бұрын
Excellent
@BlackSheep303Crafts Жыл бұрын
Thank you so much 😀
@denisesefton9432 Жыл бұрын
Thanks
@BlackSheep303Crafts Жыл бұрын
I hope it helps you. Thanks for watching!
@tamoui29632 жыл бұрын
Thanks for this. The first time I used my SnC mat I dropped it face down on the carpet! You can imagine the result🤣
@BlackSheep303Crafts2 жыл бұрын
Oh no! Well I hope some mild soap and water fixed it up.
@marybailey66022 жыл бұрын
thanks for the video
@BlackSheep303Crafts2 жыл бұрын
Thanks for watching!
@janicetarr76339 ай бұрын
Thanks for the info I have a new machine and did a no no on my fabric mat, I used heat and bond ultra and it relly messed up my brand new mat Any thoughts or sugestions for me?
@BlackSheep303Crafts9 ай бұрын
That is a pretty big problem and I'm not sure there is a way to get that off, to be honest. It's supposed to be a permanent bond with fabric so not sure about the plastic of the mat. You could try using a chemical de-sticker to attempt to remove it like Undu. Pour some on there, let it sit for a bit and then use a scraper to try and get it off. That's the only thing I can think of that might work. Good luck!
@MOWH44862 жыл бұрын
In the uk pinflair stencil glue is approved by brother for re-sticking mats.
@BlackSheep303Crafts2 жыл бұрын
Ooh, thanks for sharing that! If I can get it in the US, I'm going to try it. 😀
@juliecormick5384 Жыл бұрын
very good
@BlackSheep303Crafts Жыл бұрын
Thanks
@timeenuf4200 Жыл бұрын
I tried this glue method and it worked ok but much prefer the use of LA Totally Awesome. Easier and less expensive.
@BlackSheep303Crafts Жыл бұрын
I hadn't heard of LA Totally Awesome but will have to give it a try. Thanks!
@MV-uh7kr Жыл бұрын
Hi! About how long did you wait for the glue to dry? One hour? Or longer? Thank You!
@BlackSheep303Crafts Жыл бұрын
Well, I live in very arid Colorado so I waited about 20 - 30 minutes. In a more humid location it may take longer.
@AG-do13 Жыл бұрын
I've done this before watching your video, but I'm not happy with it. The standard mat is way too sticky now😓 I've a second mat where I left some water on the surface, this became a little better.
@BlackSheep303Crafts Жыл бұрын
You can also press the mat to a cotton t shirt or towel to remove some of the stickiness, as long as it's a tight knit so it won't leave too much residue on the mat.
@AG-do13 Жыл бұрын
@@BlackSheep303Crafts I've tried it and it doesn't really work for the paper cut lightbox I'm working on now.😓
@BlackSheep303Crafts Жыл бұрын
I'm sorry to hear that. It's not a perfect solution but works for me most of the time. Another viewer commented that they use Aileen's Tack It Over and Over mixed with water instead of the Zig pen. Maybe that would be better for you? Could be worth a try. Good luck!
@poohdbearaf2 жыл бұрын
I have the DX125 wat mat do I need pls help
@BlackSheep303Crafts2 жыл бұрын
You will need the mats that work with DX models (obviously - lol), but those always start with CADXMAT and then have the stickiness and size in the model name. So, the Standard stickiness 12 x 12 mat is CADXMATSTD12. I’m not sure why Brother gives their mats these complicated designations but it can be tricky to figure out. Also, you can make sure any pictures of the packaging say “ScanNCut DX” on the white label. Hope that helps!