Help support the channel www.patreon.com/user?u=16387344 A quick guide on some basic twists to add some flare to your work
Пікірлер: 118
@Little_River_Forge25 күн бұрын
Made it look easy. Love that you don’t make it more complicated than it should be. 👍
@UnsupervisedProduction4 жыл бұрын
I love that you go stright to the point. I've found that a lot of the backsmiths on youtube go on and on about nothing, when i just want to see how the task is done. Great video! Subscribed.
@ohmahgawdfilms6 жыл бұрын
Oh man I love that cube twist! Subscribed with that. Thanks for letting me know about the pineapple twist as well!
@BlueEternities6 жыл бұрын
I like your style. Quick and to the point. Really like the look of the square twist. Simple yet elegant.
@Lucky_Shooter6 жыл бұрын
Extremely helpful, i am going to try that cube twist on one of my barn nails.
@SolCrown802 жыл бұрын
Thanks man, these are so cool! Some of them look really complex, but you did a great job simplifying the process. Will definitely be using that cube twist in the near future!
@mikemihich4699 Жыл бұрын
Very good. Thanks for showing those basic twist. I will use those on upcoming projects
@antiantifaterrier57615 жыл бұрын
If you don’t have a welder to make a double end twist wrench you can slide a snug piece of pipe over your bar and it will keep it from kinking. Thanks for the video 👍
@deezgames89296 жыл бұрын
Great video man I just started smithing and definitely got plans for these twists!!
@sdunca48645 жыл бұрын
Bravo mate- been looking for a bit of a spruce up for my drawer pulls- Bravo!
@bwood63375 жыл бұрын
Great, well explained, and concise tutorial.
@zeeahm93545 жыл бұрын
i have so much respect for your talent. loved it man
@borderlessnature5 жыл бұрын
Good easy to follow no nonsense video, thanks for that man! Great ideas
@benfox93825 жыл бұрын
Awesome work! Love the pineapple one. My god, the cube one is fantastic! I've never seen that before... nice one!
@rendel50244 жыл бұрын
This is the first of your videos I've seen, and subscribed too. Great job, keep it up. Cheers from downunder 🌍
@jtmarshall5 жыл бұрын
Before this video I just wanted to do some bladesmithing, I had very little interest in blacksmithing... But those twists are awesome... Those axe pendants are sick too.. Definitely gonna have to share this with some buddy's
@apocalypseforge26664 жыл бұрын
Damn son, great, simple video. No fuss and just the stuff we need to know.
@warrenschneider51695 жыл бұрын
All your videos are awesome. keep up the excellent work!!!!
@johnjude26854 жыл бұрын
John all your videos has been very educational and very short. You are welcome to teach me longer than 10 minutes Sir thanks
@grandadz_forge6 жыл бұрын
Loved this. Always love twist vids
@carolynross60524 жыл бұрын
I'll be utilizing these techniques in my silversmithing venture. Thank you for sharing.
@stevebrickshitta870 Жыл бұрын
Very simply, concise instruction. Such a refreshing change. Excellent. These things needn't be limited to ornamental work. Working on a tapered, and slightly modified bar, you could knock up a handy little set of screw detractors. Worth some further investigation. I'd always intended to play round with the techniques to get a bar for a large sized Archimedean drill. Something a couple of feet long to use when working stone, and not wanting percussive tools. This stuff can lead to drill bits, augers etc of people want to investigate
@ryanalaska85704 жыл бұрын
COOL! thanks for sharing! defiantly going to try these on throwing axes. so cool.
@MrRogerhalliday5 жыл бұрын
Very interesting and awesome. Will try it out. Thanks for your contribution to the art
@kylebailey28845 жыл бұрын
Badass. Suscribed immediately after you said " Now I'm posted up over here by the bandsaw" hahahaha
@forzapaq5 жыл бұрын
Perfect. Really helpful. Many thanks from the UK 👍
@OldHickoryForge5 жыл бұрын
Help support the channel www.patreon.com/user?u=16387344
@workwithnature6 жыл бұрын
That rubics twist looks great gona try it cheers.
@davidl20653 жыл бұрын
What are they used for? 😁
@Bobsutubes3 жыл бұрын
Thx for taking the time to demonstrate. Very interesting and appreciated...
@anthonydwainworley71283 жыл бұрын
You have help me a lot from Tennessee just started forging
@MrRogerhalliday4 жыл бұрын
Thanks mate for the clear demonstration of the twists
@randallsummers65516 жыл бұрын
Thanks John, enjoyed see the video! Take care!
@tangerineman276 жыл бұрын
Verrry nice I plan to use these. Thanks!
@johntompkins1476 жыл бұрын
Thanks John, appreciate the video
@Saiserk6 жыл бұрын
Omg I didnt knew how to do the cube one, Suscribed
@DevilsAvocado695 жыл бұрын
It looks cooler with little triangles
@denniscollins18576 жыл бұрын
Great video John, thanks!
@ZombieChimpanzee5 жыл бұрын
the cube twist is great looking.
@marcomartinez63865 жыл бұрын
Man you are awesome tanks for share this, greatings from México
@jordiricartroig17246 жыл бұрын
Thani you very much!! some new ideas allways are very usefull! Also, you explained your selve very clearly. Nice video
@douglasfathers48485 жыл бұрын
Thanks for sharing I liked the cube as well .
@notfeedynotlazy4 жыл бұрын
You talk more than I usually like, but you use your talking to actually explain what you're doing and your video ends up being instructive enough. Proof that preferences are subjective, but quality is objective. Good job.
@jasontodd48015 жыл бұрын
Thanks for the tutorial!
@moarei4 жыл бұрын
Greetings from Bavaria, enjoying your doings.
@kengamble85956 жыл бұрын
Thanks for sharing and take care. 👍
@ashqelon72675 жыл бұрын
Great , this is artwork!
@jimj2085 жыл бұрын
Informative and fast! Thanks!
@KOTEC5255 жыл бұрын
So simple!! Thanks for the tutorial!!!
@arthurboddie52613 жыл бұрын
Omg I
@alchemykitchen7774 жыл бұрын
these are killer. Don't have a twisting wrench but definitely will give it a try still
@NeilGraham.I.M.F6 жыл бұрын
Always great videos!
@jonkwilloughby4 жыл бұрын
That was awesome man!!
@hammer3264 жыл бұрын
One of the best twist tutorials on youtube. Is that tool at 3:26 or anything like it, ideally wider for grooving standard 6" rail spikes in one good whack, available commercially? I just don't know who or what would use a chisel so wide and thus where to look for it.
@OldHickoryForge4 жыл бұрын
hammer326 it’s a masonry chisel. They have then at harbor freight
@hammer3264 жыл бұрын
@@OldHickoryForge Appreciate your time!
@westcoaststacker5695 жыл бұрын
Thank You for Sharing.
@aidenonfire3 жыл бұрын
Awesome job sir!
@daviddorman2745 жыл бұрын
Spectacular!!
@joelrivera16595 жыл бұрын
Excelent video bro thanks ✌🏼
@kinsey81096 жыл бұрын
Thanks bro,,,,pretty cool to learn new stuff,,,
@DarthMeheelos5 жыл бұрын
1, 3 and 4 - cool!👍👍👍
@chrisdes26676 жыл бұрын
Awesome video thank you.
@stevenlisk2468 Жыл бұрын
Nice work and demo mate thanks
@FireOfJagz6 жыл бұрын
This is amazing
@threeruffians2 жыл бұрын
Thanks for the tutorial!!! Cheers!
@jaysanders74726 жыл бұрын
Thanks for the instruction I have done all of them except the alligator twist. Think I will make a poker with that full length. The pineapple is the one that gives me the most headaches. Trying to do it on to small of stock so it never comes out right.
@christiancolombo875 жыл бұрын
Nice work!
@olekluften97763 жыл бұрын
Nice to learn. Thank you
@GaryForgingOn5 жыл бұрын
Great demo. thanks
@blakey90893 жыл бұрын
Great vid for a beginner like myself cheers man!
@IronB24 жыл бұрын
You gotta break that bad habit of tapping the chisel before striking it, haha, took me forever to get over doing that.
@maxrokatanski78425 жыл бұрын
You rock! Awesome!
@saulsandoval23135 жыл бұрын
Fantastic 👍
@javierbritezayala9634 жыл бұрын
La verdad excelente trabajo. Saludos desde limpio Paraguay.
@thefathomsofforteana66245 жыл бұрын
Good stuff.
@retardtv59214 жыл бұрын
Great for cool knife handles
@oilfortheworld6 жыл бұрын
WOW ! Thank you
@wolfiepower81035 жыл бұрын
Love it
@fitradical4 жыл бұрын
Thanks, man!
@bluesix28432 жыл бұрын
Nice!, good tutorial. 👍
@bushcraftrebelknifes89705 жыл бұрын
good video i will have to try this.
@smtknife58162 жыл бұрын
Nice bro. Thank you 🇹🇷
@mariamagdalenaespinoza13164 жыл бұрын
maravilloso tu trabajo😍
@wesking5600 Жыл бұрын
Thank you!!
@jollyjiggler4 жыл бұрын
I didnt know the pineapple twist was that simple🤯
@torchmastered5 жыл бұрын
Very cool thx
@1959ticktock5 жыл бұрын
brilliant video. I'd have liked it more if you'd slowed down a bit, but even so great technique. Came here via Jay Bates.
@robertlonis9350 Жыл бұрын
Thank you
@jadekayak015 жыл бұрын
good stuff
@alexcat95804 жыл бұрын
Thank you :)
@ramklis5 жыл бұрын
mind blown
@johnjude26775 жыл бұрын
Thsnks good video
@kurtsimmons15875 жыл бұрын
I’d like each one of those made into a knife! Do you need to flux the material when you start forging on it? That would be a good video making something out of those now!
@HiltsyAdventure4 жыл бұрын
this was done most likely with mild steel (it won't harden so won't hold an edge) you only need to flux something if you are forge welding.
@Thomyorke2253 жыл бұрын
Thanks alot man I’ll make a sissy bar for my choppers out of it
@ghisso16 жыл бұрын
bravo
@alvarobrat2 жыл бұрын
Muy bueno que gran arte💪🤝
@khosrowsalehi22143 жыл бұрын
Nice
@SHammyhead6 жыл бұрын
Dude thats awsome!!!! Now i wanna learn the smith trade!!!! Even more
@alexandrogoodman22515 жыл бұрын
I think so a very good work yeah
@seafoohotman2 жыл бұрын
Do you have a video on how this looks/works with Damascus knives and the pattern it makes?
@dlbknives48696 жыл бұрын
Nice tutorial.....thanks for doin' it!
@rifleman73132 жыл бұрын
I wonder if it would be possible to use one of these twist methods on the blade of a knife and still see it, or if the design would be lost?
@sushilagunther97393 жыл бұрын
Can do this with aluminum for earrings? Thanks beautiful work