BlackStar Amplifier FS 10 foot switch demo

  Рет қаралды 72,479

Edward Owen

Edward Owen

Күн бұрын

Пікірлер: 176
@SlimRhyno
@SlimRhyno 7 жыл бұрын
Great vid, brother. Thank you, sincerely, for not only going through all the trouble to film, edit, and then post it... for doin' it all like a Boss. Much gratitude & respect. 🙏
@robertstephanek7063
@robertstephanek7063 3 жыл бұрын
Thank God and Owen! Finally, instruction instead of audition. Learning blackstar. BEST MOST USEFUL VIDEO SO FAR!! Again, a whole hearted thank you for not playing!! Learned a lot, but gotta guess your a righteous musician. Rock on...
@quattrofischa
@quattrofischa 8 жыл бұрын
Thanks for the good explanation! Getting my 260 and FS10 this weekend, and this video made me feel comfortable getting ready for the new gear!
@lawrencebrett8993
@lawrencebrett8993 6 жыл бұрын
Excellent instructional video! Very clear, Blackstar don’t explain this nearly as well in their instructions. Many thanks.
@lucaspires8833
@lucaspires8833 8 жыл бұрын
Awesome demo/ tutorial!! The best I found about this Pedal!
@GuitardedAndBroke
@GuitardedAndBroke 4 жыл бұрын
Huge help thank you!! I'm totally a visual learner and your vid really explained/showed everything perfectly.
@Crail
@Crail 9 жыл бұрын
nice bro, I just got this amp with the pedal, and I haven't even wanted to mess with it being so overwhelmed.. really awesome in-depth demo! Rock on!
@eddie30969
@eddie30969 7 жыл бұрын
Most modeling amps have to do that because each setting is so different, to avoid loud switching fro ma quiet setting to a loud setting..The only one I know that works decent is the Line 6 Helix but its very expensive. All this is part of our "pedal dance" we have to put up with...Some pedals and modeling amps have a Universal/Global setting that I think address some of these issues,, not sure though......Thanks for the comment...Ed
@roddylynch2161
@roddylynch2161 2 жыл бұрын
Such a good video, I'm about to play in an orchestra and my FS-10 pedal confused the hell out of me when trying it out. Thank you so much for demystifying it! Also, I had NO idea that the amp had a manual tuner - mind blown😮
@stevet876
@stevet876 10 жыл бұрын
thanks for taking the time to teach me how to use my foot switch, it didn't even come with a manual.
@erics2860
@erics2860 9 жыл бұрын
what do you expect, the thing costs a quarter of a tube amp.
@roberth7399
@roberth7399 7 жыл бұрын
thanks again for this video finally after months using my head without the footswitch cause I didn't know how to use it. I fell in love with my Amp all over again. I'm glad I kept the instructions that come on top of the amp that helped alot along with your demonstrating of the navigation button:) your it's tricky alittle at first but once you got it it's a breeze.
@PhoenixRover
@PhoenixRover 9 жыл бұрын
Killer, straight forward, very useful video! Thanks for posting this, really helped me out.
@kyleritter3701
@kyleritter3701 10 жыл бұрын
Nice job man. It's good to put videos like this up because trying to get a hold of Blackstar' s customer service is impossible. Sent 3 emails to them with a question with zero response. I got a ID100 and went through and thought I saved a bunch of cool patches. Woke up the next morning and they were gone. Found out they won't save unless you take your amp out of Demo mode. Had to Google and find a forum to find that out because Blackstar's customer service is apparently non existing. They are lucky I love my ID series. Lol.
@eddie30969
@eddie30969 10 жыл бұрын
Thanks Kyle...Appreciate the positive feedback...Take care...God Bless Ed
@aaronthearcticcat8548
@aaronthearcticcat8548 5 жыл бұрын
Thank you for this walkthrough! I switched back to my blackstar and needed a solid refresher. Solid video friend. Have a good day!
@roberth7399
@roberth7399 7 жыл бұрын
Best video yet for the footswitch demonstration thanks:)
@luciferhades9805
@luciferhades9805 4 жыл бұрын
You are the best, sir!
@joefazer2424
@joefazer2424 10 жыл бұрын
Man...!! Tis is such a great n very useful n informative videos. .now i know how to use my footswitch...thx for d great demo..u d best!!..Blackstar should pay u for tis...Cheers!!
@DaveDoingDaveThings
@DaveDoingDaveThings 5 жыл бұрын
Extremely helpful! Thank you. I just bought a TVP second hand and had no clue how all the buttons work so this vid was perfect and clear
@thealeons3179
@thealeons3179 2 жыл бұрын
Damn what a super dope footswitch
@mulemusic
@mulemusic 7 жыл бұрын
Great information! Thank you! I just got my first BLACKSTAR yesterday. It is the ID core stereo 100. What is the best pedal for it? I see a diagram of the FS 12 and I wonder if I have to go with it or go with the FS 10.. Thanks for any info!
@padraiglyons3709
@padraiglyons3709 3 жыл бұрын
Thank you Edward, you saved me the torture of figuring that out (albeit eventually), from reading the manual.
@godspropertymedia6361
@godspropertymedia6361 7 жыл бұрын
can you save super crunch/distortion to the pedal? I watched the video but you didn't talk about being able to switch from distortion to clean. I have this same amp and pedal.
@kencox3587
@kencox3587 10 жыл бұрын
chopper 101 i also have an id 30 with a footswitch and have sent many emails to blackstar for some clarification on this footswitch and have had zero replies from them i really love the amp but i must say that their customer service sucks so thank you for taking the time to research this product and passing it on
@eddie30969
@eddie30969 10 жыл бұрын
THANKS FOR THE POSITIVE INPUT...ED
@finnutub333
@finnutub333 6 жыл бұрын
ik this was three years ago but does this foot switch(the fs 10) work with the ID 30 tvp?
@rubenmainor4650
@rubenmainor4650 5 жыл бұрын
Edward Owen question how do you program the Fs 10 I own one and I want to program it I just don’t know what to do
@rubenmainor4650
@rubenmainor4650 5 жыл бұрын
Edward Owen quick question about the FS10 I own one my self I am trying to set it up my question for you is how can I set it up for a live performance if I am playing during service and I need different effects
@keithfields1178
@keithfields1178 11 ай бұрын
As with any digital tuner, turn the tone control for the corresponding pickup off. This will prevent the tuner reacting in such a sensitive manner. Now the tuner will respond in a more linear fashion and not jump around as much.
@joshua20199
@joshua20199 6 жыл бұрын
Can we conveniently switch from Distortion to Clean??? That's my only deciding thing
@jeremyb2108
@jeremyb2108 7 жыл бұрын
thank you very much for this! you are a big time saver!
@DreidMusicalX
@DreidMusicalX 5 жыл бұрын
Thank you! I am picking Blackstar ID:260 TVP 2x60-watt 2x12" Stereo Combo Amp and pedal this week and its good to know.
@sterlingmattressfactory4329
@sterlingmattressfactory4329 2 жыл бұрын
So you can save 12 patches, but as far as the navigate buttons goes; am I right that the patches in nav mode are endless; "(100+)" seeing you can program those the same way?
@BAND-MAID-USA
@BAND-MAID-USA Жыл бұрын
Awesome video. Thank you. Just got a Silverline Special and this pedal. Gonna be fun. Anyone have a cool practical reason for using the NAVIGATION settings? Like how you use it or why? Thanks.
@mikedervos5974
@mikedervos5974 6 жыл бұрын
in my footswitch i cant even change patches with the buttons...and i dont know why !!! i'll do all of this but nothing...any help please?
@MrPinkStrat
@MrPinkStrat 10 жыл бұрын
Thankyou Thankyou At long last Finally this Pedal Explained
@eddie30969
@eddie30969 10 жыл бұрын
I appreciate the positive feedback...ihope you gave me a thumbs up on the You Tube page...that helps...Thanks for the comments. Ed
@walterschilling4512
@walterschilling4512 10 жыл бұрын
Jeez, Thanks so much for showing this info save me a lot of time,Cheers
@eddie30969
@eddie30969 9 жыл бұрын
walter schilling cool...
@Nickraculous
@Nickraculous 9 жыл бұрын
Is there a noticeable mute or pause in sound when switching channels? With both the Vox hybrids and Line 6 amps there is, I'm wondering if this is different..
@johnaitchison7837
@johnaitchison7837 6 жыл бұрын
I bought the ID60TVP a little while ago and recently added the FS10 footswitch. Mine does not work in the way described. I checked the amp was not in demo mode. If I program patches on the amp it works and the results are shown on the footswitch. BUT if I try to select the patches from the footswitch they do not work. eg Footswitch is in Patch mode, do the hold down on switch 3 and the bank colour LED does not change. Try to change patch by any of the switches does nothing. However if you do it on the amp - it is all reflected on the switch unit. Any ideas?
@attilakralik6542
@attilakralik6542 5 жыл бұрын
Thank you for your video it was very helpful me
@camelwars95
@camelwars95 5 жыл бұрын
thanks for this, i bought this pedal to go with my idcore 150 head and i thought i was stupid, actually found out the pedal doesnt work
@alandungate9560
@alandungate9560 4 жыл бұрын
Hey bud, question! Every time I save my patches from scratch and go in-between them at rehearsals... Everyone I switch the amp off and go back the week after, they are not saved.... How do I fix this??
@nezzxam
@nezzxam 8 жыл бұрын
I bought one of these used, I can't seem to get my FS10 to work with the ID260 TVP. Is it some special guitar lead that has to be used (like balanced tele) or something?
@fththkll4979
@fththkll4979 7 жыл бұрын
Thanks for the video. Is it compatible with id core 40?
@psychosliver
@psychosliver 9 жыл бұрын
This helps me out very well. How's the response time in switching from patch channels? Mine has some kind latency and I notice it very well as I'm used to the quick response time switching patches from my existing Zoom G3X. Tried updating the amp's firmware recently to no avail. I have an ID:260TVC by the way. Any advice would suffice.
@Rich6Brew
@Rich6Brew 6 жыл бұрын
Nothing wrong with the tuner in this foot switch if you know what you're doing (neck pickup/tone control). The whole thing is not as complicated as it first seems. You just need to get your head round it. After that you will find it very flexible.
@JRs-guitars
@JRs-guitars 2 жыл бұрын
Just bought one...doesn't work. Hitting the buttons doesn't do anything. Am I doing something wrong? It's plugged in and powered.
@Bastbog
@Bastbog 8 жыл бұрын
I was wondering if there is any delay switching from clean to distortion? i get both yes and no from different forums.. This is the dealbreaker if i'm buying one or not
@nic_1320
@nic_1320 4 жыл бұрын
I had latency problems with this very pedal on my Blackstar ID150h head. Contacted both Blackstar and their parents company Korg. Both made statements saying the switches on the pedal actuate on the release of the switch, not the push down. I just couldn't compensate for this live so I've been experimenting with a midi setup. Believe it or not, an older Line 6 POD XT live pedal I have controls the midi perfectly. That being said, that's a pretty clunky way to control just the midi. I've also tried an old DigiTech control seven pedal. It changes the channels fine but has a slight delay (not as much as the Blackstar pedal though). It remains to be seen how that will perform live. I'm thinking about trying out a Tech 21 midi mouse next. Good luck!
@rjcavazos89
@rjcavazos89 7 жыл бұрын
Watched the vid but couldn't find the info I was looking for. Would you happen to know why my footswitch keeps displaying 3 horizontal red bars after maybe about 30seconds of playing? I've tried different cables/guitars. So it stays on channel 2 for example and I'll be playing a bit and then the amp goes silent (still on) and the footswitch shows 3 horizontal red bars. Thanks!
@chemicalkiss6516
@chemicalkiss6516 7 жыл бұрын
I'm having the same problem.
@metalmonti
@metalmonti 5 жыл бұрын
Ok 👌
@90sDude
@90sDude 3 жыл бұрын
I have an issue on mine where my first two channels are the same volume and then my third and my fourth channel are noticeably louder. if I try and adjust the volume on my first two channels and save it again the third and fourth channel just got even louder. Help?
@Jeepjones85
@Jeepjones85 7 жыл бұрын
Great video! Thanks
@crazycowss2130
@crazycowss2130 4 жыл бұрын
Cool video but when i try to save different tones on the banks it does save them, but when i turn the amp off and on again the custom tone is gone and is replaced by the stock tone that the particular bank selection had before. Is there something i can do about this?
@GlaszEye
@GlaszEye 9 ай бұрын
Spot on. Thank you
@llahsr
@llahsr 7 жыл бұрын
thanks very helpful indeed
@lucbourdon9331
@lucbourdon9331 4 жыл бұрын
Thanks for the explanation, you saved me about 800$ in swear word jar money.
@wanderhoydonkairbrushhalsi9959
@wanderhoydonkairbrushhalsi9959 2 жыл бұрын
Hello! Is there anyway to do a volume boost on the pedalboard ? 🙂
@gerardmariano2556
@gerardmariano2556 4 жыл бұрын
For example patch 1 is clean then patch 2 is my dirt sound. How's the latency? I need to know before I purchase the footswitch.
@sergiobc1510
@sergiobc1510 6 жыл бұрын
Hola, tengo el amplificador ID:30 TVP y esta misma pedalera, he aprendido a guardar los canales y a desplazarlos por los bancos como bien explicas en este tutorial. Mi problema llega cuando apago el amplificador y me ocurre que se borra todo lo guardado anteriormente!!! Y me he fijado que cuando tú prendes tu amplificador lo hace directamente en el modo BANK y a mí me comienza en el modo MANUAL, puede estar ahí el problema? Cómo haces para iniciar directamente en el modo bank? Un saludo y gracias!
@devlinwillingham8833
@devlinwillingham8833 10 жыл бұрын
Yea, thanks a lot man. good job
@ericwolfe7901
@ericwolfe7901 3 жыл бұрын
When using the fs12 what setting do you put your amp on as on clean crunch etc or dies it matter
@SlimRhyno
@SlimRhyno 7 жыл бұрын
Sincerely, thank you for explaining this fantastically useful, albeit not easily accessible at first, technology so that all of us may just get to the part where we crank the **** out this ****** ****** piece of badass amplitude! 😎🙏
@markust2898
@markust2898 4 жыл бұрын
Thanks for that, very helpful
@rorywillis7228
@rorywillis7228 3 жыл бұрын
ok i turn my amp off an the patches did not save when i turned the amp back on, what did i do wrong?
@thorndog100
@thorndog100 9 жыл бұрын
Good man..very helpful....
@jamesrobertwhitaker2599
@jamesrobertwhitaker2599 3 ай бұрын
finally some instruction on how to use it
@rayana4250
@rayana4250 7 жыл бұрын
Hello, I have 2 questions. 1. Lets say I'm in patch 4 on 'green'. If i move to 'orange', do I still stay on 'green 4' till i press another button or does it automatically moves me to patch 8 in 'orange'? 2. Is the ID: 60 loud enough in a small rehearsal room right next to the drums? Thank you.
@lancewilliams6486
@lancewilliams6486 6 жыл бұрын
Rayan A it changes to Orange 8
@ChrisinMO
@ChrisinMO 10 жыл бұрын
Very good! I liked it. Informative. THANKS.
@eddie30969
@eddie30969 10 жыл бұрын
Thank you....pls dont forget to hit like button...it helps..Ed
@ChrisinMO
@ChrisinMO 10 жыл бұрын
Edward Owen I did!!!
@4NXCHANGE
@4NXCHANGE 7 жыл бұрын
Just want make sure that this foot controller works the ID: 30 right? Thank you..
@eddie30969
@eddie30969 7 жыл бұрын
Im so sorry I dont know go to Black star web site to see if its listed under the ID 30..God Bless..Ed :) Looking down a few comments it looks liek a guy with ID 30 is using it....!!!!!
@4NXCHANGE
@4NXCHANGE 7 жыл бұрын
Yup, I got one and it works. You are the coolest Ed... Thank you so much for making it easier for us. Awesome demo. God bless.
@rorywillis7228
@rorywillis7228 3 жыл бұрын
so you turn the amp off an all programming is lost?
@johnhernandez1505
@johnhernandez1505 3 жыл бұрын
But does this work for the Silverline?
@ernestozeta
@ernestozeta 7 жыл бұрын
Hi Edward! I have a question...Have you got some problems with this Footswitch? One day my Footswitch started to work really bad, absolutely crazy...I read some others situation of other costumers and they had the same problem...I would like to buy another one but I am not sure, and the coustumers support in my country doesn't exist...so...I don't trust in Blackstar anymore. The serial number is (21) ZZA14.....
@eddie30969
@eddie30969 7 жыл бұрын
Hey, not sure whats going on, could be connections, plug, try resetting or factory reset (Ouch)..I sold my amp and pedal a while back, sorry I cant help you Good luck God Bless.... Ed :)
@ernestozeta
@ernestozeta 7 жыл бұрын
Edward Owen No problem! Tks for your answer!
@sanjingitarista
@sanjingitarista 4 жыл бұрын
Thanks for posting. If you dont mind me asking.. ive noticed lots of people have issues with foot switch as do I, apparently the cable has to be the right one, i just switched a few and still nothing. It wont work right. Im looking into a midi controler. And more important, my settings/patches don’t save when i shut the amp off and on. If you have answers they will be greatly appreciates.
@nic_1320
@nic_1320 4 жыл бұрын
I had latency problems with this very pedal on my Blackstar ID150h head. Contacted both Blackstar and their parents company Korg. Both made statements saying the switches on the pedal actuate on the release of the switch, not the push down. I just couldn't compensate for this live so I've been experimenting with a midi setup. Believe it or not, an older Line 6 POD XT live pedal I have controls the midi perfectly. That being said, that's a pretty clunky way to control just the midi. I've also tried an old DigiTech control seven pedal. It changes the channels fine but has a slight delay (not as much as the Blackstar pedal though). It remains to be seen how that will perform live. I'm thinking about trying out a Tech 21 midi mouse next. Good luck!
@sanjingitarista
@sanjingitarista 4 жыл бұрын
@@nic_1320 hey thanks, i did lots of reviews and got a midi commander. Never used a midi before so needed some help coding it. Anyways, it solved all my issues. That pedal is great. I do see some room for improvements but its perfectly fine the way it is.
@nic_1320
@nic_1320 4 жыл бұрын
@@sanjingitarista did you get the Melo Audio Midi Commander? If so, do you use it to just switch channels or do you use it for more? Do you have any latency issues when switching? I'm obsessively hunting for a simple, clean, midi switch that doesn't have any latency. I'm close to pulling the trigger on the Tech 21 Midi Mouse and hoping for the best.
@sanjingitarista
@sanjingitarista 4 жыл бұрын
@@nic_1320 Yeap. I use it for everything and it works great. No latency at all and the effects work great too. One thing....Lets say you have chorus as one of the effects on your clean channel, then you switch to dirty and you want delay (assigned to another button of course) , youll have to hit it twice. Im not sure why, or if its just how i set it up, as i mentioned im a complete newbie to midi. I think it has something to do with the order of how I went from one channel to other. Second....since on Blackstar you have one knob for all those effects, it cant give you the option of lets say having 2 delays assigned to 2 switchs (long and short) ive talked to Blackstar and Midi people. It cant be done just yet. Dont mean to sound like its not a great option with all this but i really like that pedal and how it works with Blackstar.
@nic_1320
@nic_1320 4 жыл бұрын
@@sanjingitarista That's some great info. It's really cool that your midi also allows some effect changes as well as channel changes. I ended up ordering the Tech 21 midi mouse yesterday. My main goal at the moment is to have a midi switch that can instantly change from one channel to the next. I really like preloading all the effects I need per channel in the Blackstar software and rolling with it. You would think that Blackstar would come up with their own midi pedal to solve the latency issues that some people are having. I've read more than a few posts, reviews, etc. that point this issue out. Why not just own it and give your users another option?
@tattoofred
@tattoofred 10 жыл бұрын
Thanks for this video ;)
@taylor_made86
@taylor_made86 2 жыл бұрын
I used my footswitch last night and noticed a bit of a lag/delay when switching between patches. Has anyone else experienced this, and if so how do you fix it?
@MadanzaBand
@MadanzaBand 9 жыл бұрын
helpful demo, thanks
@ronnyp6934
@ronnyp6934 7 жыл бұрын
dame just found out i got the wrong pedal i got the fs 11 would of been nice for the shop i got it from to say thats no good for your id 15 tvp got them both same time....thanks for vid will come in handy when i get proper pedal...
@mikedervos5974
@mikedervos5974 7 жыл бұрын
this foot switch comes up with the tvp amp or I must buy the foot switch separately?
@nassimtarrega
@nassimtarrega 7 жыл бұрын
mihalis dervos you have to buy it separately
@CarloCanedoli
@CarloCanedoli 8 жыл бұрын
hi, I have an amplifier blackstar id-core 20, I connected the pedal, the blackstar fs-10, but no lights led the pedal, the amp works well, it is new, bought last year in the summer, I the pedal connected with the cable attached but nothing to do. Why?
@eddie30969
@eddie30969 8 жыл бұрын
+Carlo Canedoli Could be a bad pedal, or the amp could be bad as far as the pedal is concerned, I'm not sure on the ID 20 if it supports the FS 10 foot pedal. check manual. Some amps can only use certain pedals. Im not sure about yours I had the ID 60. sometimes its hard to know things until you buy them...make sure the ID 20 can use the FS10. Hope it all works out for you!.......Ed :)
@CarloCanedoli
@CarloCanedoli 8 жыл бұрын
Edward Owen thanks for the answer,
@eddie30969
@eddie30969 8 жыл бұрын
I get things to try out, and the nusually move on to otehr things..for demo purposes. My Tube amp right now is the EVH 5150. But for gigging I use Line 6 Helix pedal straight to PA sound system..I lvoe the Line 6 Pod X3 live and have 2 of those..great box..Ed
@eddie30969
@eddie30969 8 жыл бұрын
+CAT CANCRUNCH I use all kinds of Amps, But No i dont, for what I do , I use the Helix Amp Modeler through a PA or Clean Solid State amp. Check out my video on the Helix...Thnaks ...;)
@eddie30969
@eddie30969 8 жыл бұрын
+Carlo Canedoli Im not sure if the ID 20 accepts the FS 10, look on line, it might not. If it does then it could be the amp or the pedal. If you bought either item used it could be defective...Good Luck... Ed:)
@locoberzerker
@locoberzerker 7 жыл бұрын
I bought one of these amps (ID-260TVP) a few months ago. I had to wait a couple of weeks for the music store to order the pedal, which of course cost extra. I really wish I would have been able to try the pedal first before buying the amp, because I'm honestly really disappointed with it. It's OK for playing around in the studio, but using it for a gig is not going to work for me. There is too much of a delay trying to switch patches and banks. It's a pain in the ass to switch back and forth from effects mode to patch mode. Also, it's easy to accidentally choose "store" instead of switching back to patch mode. I'm a guitar player, not a freaking tap dancer!
@nic_1320
@nic_1320 4 жыл бұрын
I had latency problems with this very pedal on my Blackstar ID150h head. Contacted both Blackstar and their parents company Korg. Both made statements saying the switches on the pedal actuate on the release of the switch, not the push down. I just couldn't compensate for this live so I've been experimenting with a midi setup. Believe it or not, an older Line 6 POD XT live pedal I have controls the midi perfectly. That being said, that's a pretty clunky way to control just the midi. I've also tried an old DigiTech control seven pedal. It changes the channels fine but has a slight delay (not as much as the Blackstar pedal though). It remains to be seen how that will perform live. I'm thinking about trying out a Tech 21 midi mouse next. Good luck!
@llahsr
@llahsr 7 жыл бұрын
the video jumps at the crucial time in navigate your hand hits a button then changes to the other end ????basically 128 of distortion
@nealparler1980
@nealparler1980 5 жыл бұрын
Thanks for the Nice Video. I have a id core 20. Is it compatible?
@woogsteruk
@woogsteruk 5 жыл бұрын
Great video.. thx bud
@samwinn2774
@samwinn2774 7 жыл бұрын
Man great demo but I still don't understand the navigation setting very well because you skipped a few things in the video, what is the purpose of navigation? So you can go from having drive and effects and clean with out effects and vice versa with out having to hold the left switch?? Thanks man
@eddie30969
@eddie30969 7 жыл бұрын
Its used to save patch to various locations of yoru choice watch around 7 minute marker and it kind of explains it. Thanks Ed :0
@markdavis545
@markdavis545 3 жыл бұрын
so you can't program in demo mod???? or not???
@arkeyn3831
@arkeyn3831 3 жыл бұрын
will this switch work with id core stereo 10?
@rorywillis7228
@rorywillis7228 3 жыл бұрын
how do you save them so you dont have to touch the amp
@rubenmainor4650
@rubenmainor4650 6 жыл бұрын
If i turned off my amp Will it save my sound?
@adamthorne3649
@adamthorne3649 8 жыл бұрын
Thanks.....now I understand it , instructions were a bit hard to follow
@jerrysimpson4562
@jerrysimpson4562 2 ай бұрын
I have a accoustic guitar with a built-in pickup. Somebody tell me will this work properly on my accoustic? Don't want to waste my money .
@Scotchism
@Scotchism 8 жыл бұрын
I'm considering getting this amp/pedal combo. Would you be able to change from distortion to clean real quick by setting up channels on the pedal? Cheers!
@eddie30969
@eddie30969 8 жыл бұрын
+Ivan Ibarra Yes very quickly you set up patches in any order you want them..... Ed :)
@Scotchism
@Scotchism 8 жыл бұрын
+Edward Owen Thank you very much for the reply Ed. Now I can purchase this tomorrow. Looking forward to it
@eddie30969
@eddie30969 8 жыл бұрын
cool
@CitizenCS
@CitizenCS 7 жыл бұрын
My foot switch is DOA. Also two malfunctioning LEDs on the is core 100. Is Blackstar crap or not? Anyone? I am pissed!
@lele9thebest
@lele9thebest 9 жыл бұрын
Thanks so much, but how i can save permanently my effects? Every time i turn off the amp, every effects that i made on footswitch vanish.
@theplaneimage
@theplaneimage 8 жыл бұрын
+manmadegod.... It tells you how to save patches in the handbook, page 9. Rather you than me, it looks a bit complicated :-) www.blackstaramps.com/pdf/handbooks/fs-10-handbook.pdf
@eddie30969
@eddie30969 8 жыл бұрын
+manmadegod make sure the light flashes that it was saved as described in video...Merry Christmas
@eddie30969
@eddie30969 8 жыл бұрын
+manmadegod Watch video you have to take amp out of Demo mode..then it will work...
@Rockerrobin
@Rockerrobin 7 жыл бұрын
how many patches can be accessed with the foot switch can I use all 124 patches or just 12?
@eddie30969
@eddie30969 7 жыл бұрын
All can be accesed..Thanks Ed ;)
@llahsr
@llahsr 7 жыл бұрын
my problem is how do you save the patches you create yourself ,because from clean to overdrive the volume change is very loud
@eddie30969
@eddie30969 7 жыл бұрын
Im sure it saves what ever volume you choose while saving each patch make sure you balance the volume out before you save.
@llahsr
@llahsr 7 жыл бұрын
ok ill give it a try thanks Edward
@rubenmainor4650
@rubenmainor4650 6 жыл бұрын
Can anyone tell me if sounds can be combined for instance delay and distortion with the pedal
@fththkll4979
@fththkll4979 7 жыл бұрын
Thanks for the video. I have a id core 40. Is it compatible with my amp? Anybody knows it?
@Darkokill35
@Darkokill35 8 жыл бұрын
hey man i was wondering if u could do it from heavy distorted to a nice clean sound but can u program the pedals to be diffirent sounds on the patch ?
@eddie30969
@eddie30969 8 жыл бұрын
+Darko kill anything you want any patch can be saved..Thx Ed
@Darkokill35
@Darkokill35 8 жыл бұрын
+Edward Owen also how do I change the one of the patches settings as when I change it and go to a different patch and come back to the other patch it resets all my setting back to the ones it use to have
@eddie30969
@eddie30969 8 жыл бұрын
+Darko kill you are in demo mode get out of demo mode on amp I forgot how to do that off top of my head but in my video it tells you how to take amp out of demo mode...ed
@Darkokill35
@Darkokill35 8 жыл бұрын
+Edward Owen thank you
@paultimke4176
@paultimke4176 8 жыл бұрын
is 60w loud enough for a gig? i have a drummer who hits really hard
@eightupsf
@eightupsf 8 жыл бұрын
no
@joethrelfall6370
@joethrelfall6370 9 жыл бұрын
Hi there can this footswitch be used on the id core 20 amp?? Cos I need to know an it looks really coolr
@greatvanzini
@greatvanzini 9 жыл бұрын
joe threlfall I may be wrong but I don't think it can be used on the Core amps. Could be wrong. It happened one other time. They do make a simpler pedal & less costly 2 button one for the Core amps but it doesn't do as much. I am supposed to get mine here a few minutes.
@NormanZealandMalana
@NormanZealandMalana 9 жыл бұрын
No. The ID core series uses the FS 11
@greatvanzini
@greatvanzini 9 жыл бұрын
+Norman Zealand Malana Thanks! I should have separated the 2 core amps. Norman is spot on. Duh! I own both & should have been more clear.
@greatvanzini
@greatvanzini 9 жыл бұрын
+greatvanzinni Oops! There I go again. Should have separated the 2 I.D. amps!
@NormanZealandMalana
@NormanZealandMalana 9 жыл бұрын
Does the tuner work ok for a 7th string B? Thanks
@undeadrmy2012
@undeadrmy2012 9 жыл бұрын
+Norman Zealand Malana i have the Id 60 with this pedal and it works fine for me on everything up to a 7 string, it has a tough time picking up anything lower than that for me at least
@NormanZealandMalana
@NormanZealandMalana 9 жыл бұрын
+Will McGhee Thanks! Much appreciated!
@misterlove7034
@misterlove7034 9 жыл бұрын
Can this fs10 be used on the ID core 40 amp??
@greatvanzini
@greatvanzini 9 жыл бұрын
Mario Rios I don't think it can be used on the Core amps. Could be wrong. It happened once before. They do make a simpler pedal & less costly 2 button one for the Core amps but it doesn't do as much. I am supposed to get mine here a few minutes. I.D. Core 40 here too. What is odd I have been able to download some of the patches for the ID Series amps for my Core. On a couple I did get an error message but I clicked out of it & it seemed to work fine.
@NormanZealandMalana
@NormanZealandMalana 9 жыл бұрын
No. The ID core series uses the FS 11
@2112Gibbs
@2112Gibbs 6 жыл бұрын
Seems like my ID 260 loses it's memory when you either power the amp off or change to different banks ? I know I'm storing (following the instructions) the presets properly. Anyone else having this issue ? Thanks.
@JOHNKUHNMUSIC
@JOHNKUHNMUSIC 6 жыл бұрын
Hey Michael, took me a while to understand the operation of this crazy FS. I do a solo show so my LIFE depends on this FS..LOL. I made an Mp3 a few yrs ago on the dos' and DONTS'of operation thats helped alotta players. Edward said He's sold the amp so not sure if he'll reply back to ya?Let me know if you'd like the file.
@2112Gibbs
@2112Gibbs 6 жыл бұрын
@@JOHNKUHNMUSIC I pretty much got it by now, John - but thanks so much for responding !
@thenovicenoisemaker
@thenovicenoisemaker 2 жыл бұрын
Thank you 8 yesrs on
@Guitar387
@Guitar387 3 жыл бұрын
Does anyone know of this will work with the silverline series
@mikemorada6290
@mikemorada6290 7 жыл бұрын
Fender telecaster modern player series to the left lol!
Blackstar ID CORE 100 & 150 Demo - Super Wide Stereo Goodness!
27:00
Blackstar Webcast - ID:Core and ID:Series - The Differences
28:34
Blackstar Amplification
Рет қаралды 80 М.
У вас там какие таланты ?😂
00:19
Карина Хафизова
Рет қаралды 13 МЛН
Я сделала самое маленькое в мире мороженое!
00:43
ЗНАЛИ? ТОЛЬКО ОАЭ 🤫
00:13
Сам себе сушист
Рет қаралды 3,7 МЛН
The Blackstar FS10 footswitch, Korg MicroKey 2 and Tusq stringtrees
12:43
Jon is just TOO LouD!!
Рет қаралды 5 М.
Blackstar ID Series In-Depth
21:35
Reidys Home Of Music
Рет қаралды 9 М.
Blackstar ID:Core V4 Incredible Tone & Immersive Super Wide Stereo Sound
20:40
Nafiri Music Jakarta
Рет қаралды 4,7 М.
Blackstar ID:260TVP Combo Amplifier Demo - Sweetwater Sound
7:40
Blackstar ID Core 20 Tanıtımı
57:56
Gitar Teknikleri
Рет қаралды 33 М.
Which Switcher Is RIGHT For You?
21:02
Vertex Effects
Рет қаралды 155 М.
Blackstar Amplifier 128 presets
22:45
Edward Owen
Рет қаралды 18 М.
Blackstar ID:100 TVP Amp Head Review
16:45
Matt The Riff Master
Рет қаралды 32 М.
BLACKSTAR FS-10 FOOTSWITCH EN ESPAÑOL
4:31
Ernesto Fernandez
Рет қаралды 6 М.
У вас там какие таланты ?😂
00:19
Карина Хафизова
Рет қаралды 13 МЛН