Blasting, Painting and testing | Profile Test | Salt Test | Dust Test | Airless Spray Painting

[@rolangibson7054]

Ha. ha .. you checked the anchor profile of the blasting without gloves and your hands are in direct contact with the blasted sample.

[@av.aboobacker354]

It is preferable to test salt level, then dust level and then anchor profile to avoid any inaccurate readings or avoid direct contact on test surface except test equipment. The video is very good and sharing the knowledge to others. Welldone 👍

[@georgemcintyre3674]

Shouldnt be handling blasted sufaces with bare hands as this will contaminate the blast

[@leslieallan392]

Suggest the use of gloves while performing all test to eliminate the possibilities of contamination from the skin....ie oils,sweat etc.

[@sibusisogule2198]

When you inspecting a blasted surface or vessel with visual inspection before taking salt test which critical points you should check for

[@shahinneyyathoor]

Good informative Waiting for more technical vedios

[@harikrishnakumar5181]

Pls mention the dust tape number of rubing and sequence of rubing method

[@hasansetiyawan7131]

Its very good for me, auto subscribe . Kindly Please keep always share the others gouge .

[@MalixOnAir]

Sure

[@arunrajendran8269]

BEFORE START WORK WE NEED TO DO BLOTTER PATER TEST.

[@satyanayak8818]

Nice video to learning inspection. How much ml distilled water use during salt test?

[@mysworld4893]

1.5 ml

[@meconlimited3896]

Have a look at Defelsko positector 6000 with the different probes and 1 gauge body

[@yazhiniyazhini5782]

Wht is the meaning of SEM? Sir ✍️

[@rajeshqcrajesh1816]

Good Job....

[@nvscreation6906]

Thanks useful information

[@Indian68228]

Painting ka coverage kaise nikal te hai btaiye plz

[@SarojKumar-qv1pt]

Very very nice 👍 thanks

[@heavenlyworship2018]

well done , that is what i needed, make me learn more knowlege

[@wiwitajipamungkas5274]

How to read testex replica tape?

[@simplexination9837]

music is awsome bro...

[@MalixOnAir]

Thanks

[@guruprasaddongre6319]

Sir, हम साल्ट कंटैमिनेशन टेस्ट q करते है

[@yosefmaar2433]

Great..👍

[@pambudibaguswidodo9768]

thank you, nice video

[@amalababu91]

Excellent 👍✨

[@marcinlisiak700]

I'm blasting at least two years. But I'm sending this first time in my life. What for is this test? It's surface test to check good abrasive use to blasting? Or test to check blasting operator? Thanks for answer. P.s Sorry my English

[@MalixOnAir]

Dear Marcin 1st test for dust remaining in surface (tape test) if any dust, there are chance of adhesion failure and corrosion under paint filim. 2nd test for profile. 3rd test is salt contamination test (for checking any salt) These test not for blaster Please subscribe my channel

[@marcinlisiak700]

@@MalixOnAir Many thanks for answer

[@pa3160]

@@monco123 you seems to be too much experienced in this field.

[@mustafaozbal5505]

Thank you.

[@MalixOnAir]

You are most welcome

[@looterengine9778]

Good knowledge... Waiting for your new videos

[@Abdulbasit-bq4hi]

Why we are deducting 50microns from actual reading..... please rply fast

[@MalixOnAir]

Thickness of replica

[@mdrezaulkarimrezaul2255]

I want to take sandblasting and spray painting courses. If anyone help me.

[@baynguyen9359]

Some segments in the video are stamped not adjacent to each other

[@roohulaminroohulamin4086]

Good Job

[@MalixOnAir]

Thanks

[@smashhitz6653]

very good

[@mastankhadim.2091]

Can i get Bgas level 2 Notes for QC Inspector?

[@MalixOnAir]

yes

[@mastankhadim.2091]

Can you provide?

[@ajay_constantine]

This video alone actually covered 50% of BGAS GR 2!!

[@ShahzadAhmed-ob7qc]

Very very nice video

[@MalixOnAir]

Thanks

[@prakashano4749]

Good.. Give attention to avoid the contact of bare hand to blasted surface...

[@MalixOnAir]

Ok, sir

[@ajm3827]

Why deducting 50microns?

[@MalixOnAir]

Thickness of paper

[@ssaihtc8922]

Thanks for sharing 🙂🙂🙂

[@technologyatease1642]

great informative videos I am subscribing you

[@sconstruction7649]

Blasting machine Kaha milega

[@akashroy9422]

My favorite job sand Blasting i love you sand Blasting ❤❤

[@buzigoogle9757]

Please use gloves when you touch a blasted surface❤

[@Luxiic]

Nice

[@arunrajendran8269]

SIR NO BLOTTER TEST IN THIS VIDEO.

[@reynoldpanggabean209]

Why from the first you don't used hand glove

[@bipinmaharana5301]

Stop bkground music.

[@MalixOnAir]

I wil

[@nhungghamm4758]

Some segments in the video are stamped not adjacent to each other

[@vijaicm9478]

Nice