awesome video guys , just installed a fire strom cab heater in my 2018 S1000 , dealing with air locks ,didnt really know about the bleeder valve , gave me some useful tips , thanks for sharing , happy muddy trails !!!!
@stevehansen2664 жыл бұрын
Just watched another video and according to them you only need to turn the bleed bolt a quarter turn to allow the air to come out until you see coolant coming out then close it.. turn the RZR on let it cycle through then turn it off and repeat the process just to make sure you got all the air the first time.
@josecardzna53672 жыл бұрын
Thanks for the video just upgraded my radiator and after a long run, rock got stuck between the fan and radiator.
@MajorLeague_Chicken3 жыл бұрын
Great video u just saved my life thanks bro
@lynnbarnett85735 жыл бұрын
Great video, thanks a bunch for this one, I think you probably saved me from blowing mine up, Thanks, thanks, thanks!!!
@brockandleah5 жыл бұрын
No problem man go follow our Cajun MUDDERFUKERZ page
@ericpace76382 жыл бұрын
Same lol
@johnmontgomery98063 жыл бұрын
Draining green coolant but added dexcool, they don't mix, will gel up
@jphifer22342 жыл бұрын
Wrong
@johnmontgomery98062 жыл бұрын
@@jphifer2234 not wrong you better research more I've sold antifreeze for 35 yrs,unless you added universal antifreeze. Dexcool will not blend and cause problems
@joseignaciorivas4682 жыл бұрын
@@johnmontgomery9806 Then what could you use for aluminum engines instead of Polaris brand unless that’s all you can really use?? Asking because I don’t want to mess up my rzr
@vlo90795 жыл бұрын
Great video. I replaced my thermostat and temp sensor switch recently. I think I may need to do this. 2015 900 rzr-s
@brockandleah5 жыл бұрын
Yes you need to
@jimboslice2763 жыл бұрын
How hard was that to get to I gotta do the same
@22ml314 жыл бұрын
Any tips on getting the bleeder screw out? Whatever idiot put mine on last did it way too tight. I've tried penetrating oil and every type of screwdriver and wrench I have to get it off. It's in such a bad spot.
@stevehansen2664 жыл бұрын
That bleeder bolt is so conveniently located.. thanks Polaris.
@ericpace76382 жыл бұрын
Very helpful thank you
@trailrippers15884 жыл бұрын
Hey well you are doing this process do you have the rzr running????
@kabba45755 жыл бұрын
I've had my rzr for only about 2 weeks and the coolant is low but it already had air in the lines and I've never added coolant yet