5:31 For the people that are watching this the day I post this comment. Knife Project has changed, so for the door, you would 1. Click the plane and go into edit mode with the whole plane selected in edit mode as well 2. Select the cube that is going to make the door frame 3. go into mesh and click Knife Project 4. Your done and may continue the video :) I hope this helps the people that are stuck with the Error "no other selected object have wire or boundary edges to use for projection"
@Bradley_TL2 жыл бұрын
it wont work still for me i dont see an outline and the way u say it is confusing and if it does cut it cuts weird and not where i want it to
@future_things76652 жыл бұрын
@@Bradley_TL Basically you click the plane body, then with that go into edit mode with the plane body still selected, press A to select the whole plane body then click the cube that is going to make the door, go into mesh and then knife project. I hope this is more clear. I hope this makes my statement more clear to you.
@Bradley_TL2 жыл бұрын
@@future_things7665 That's exactly what i did and it would not cut through i enabled cut through as well
@Laizer__2 жыл бұрын
Thank you so much, it works
@zmih3242 жыл бұрын
oml thank you I was stuck here for ages.
@CounterStrikeSquared2 жыл бұрын
This was literally the best tutorial for making a plane on KZbin, it is so simple yet so helpful, I really enjoyed it
@samuelbeaumont7911 Жыл бұрын
For the knife project part - if when you cut through it and it doesn't cut straight - you need to go into orthographic view. That's the area with the X,Y,Z on the top right. Knife project cuts where your camera is, so you should always be in orthographic view for it to cut nicely.
@joelmulder Жыл бұрын
A few tips: When Alt-Clicking to select loops, click on the diagonal edge, not the center of the face. That tells blender in which direction you want to select a loop. And when you're selecting the interior cutout of the door, simply select a single plane, and hit command/control-L to select all linked verts since that cutout is already separate from the rest of the hull. When doing the windows, don't duplicate them by hand. Just use an array modifier on the cutter so you can have precise and consistent spacing. Although, I feel like this entire thing would be done easier with booleans.
@RC-Heli835 Жыл бұрын
Thanks for sharing man! Awesome stuff!
@Estraying3 жыл бұрын
Your videos are extremely easy to follow and helpful! You sir have just earned another sub!
@kwekujakese3 жыл бұрын
Your tutorials are so simple and easy to follow! Thanks man
@AmanLegoman3 жыл бұрын
This is an excellent tutorial!!! Very well explained, keep it up!!!
@1fresh4503 жыл бұрын
Thank you so much!
@jlssculpturedesign81407 ай бұрын
my second go on blender , i managed to get a good plane made, will be doing the interior today, looking to learn how to make a door which elevates down with steps built in and eventually a lifting ramp at the rear.
@swiwaii7813 жыл бұрын
thank you so much i was spazzing out with the fuselage windows i sill subscribe and thumbs up for this help ive needed for 3 weeks
@1fresh4503 жыл бұрын
Glad it helped
@huayra_gaming5 ай бұрын
this legend learned me how to extand my passion for moddeling with my love for aviation so tysm youre a really hero of me
@paulbeeley6210 Жыл бұрын
Great tutorial, I never thought Id be able to model, but I have created my first jet :-) Thanks
@SpeedBird42843 жыл бұрын
Amazing work man
@economic68983 жыл бұрын
how did i not get featured very angry
@4yxxn3793 жыл бұрын
Hey dude you are very good at explaining things. Do you know when you are going to do the cockpit windows or nah?
@goodoldwarthunder9 ай бұрын
whenever I try to knife project a mesh it says error no other selected objects have wire or boundary edges to use for projection. I don’t know how to fix it
@giantbill4 ай бұрын
Same for me I need help!!
@AriyaMinecraftandBloxd.ioGOOD13 күн бұрын
I tryed doing the knife project part It said this when i tried "No other selected objects have wire or boundary edges to use for projection"
@fanisgiannoulakis16310 күн бұрын
Good evening, my friend, I don't know if you are irrelevant or relevant, but since you do this whole thing with the knife, then when you put the texture in the reflection, it distorts with the result that it is not at all correct, am I right?
@nanamideku11193 жыл бұрын
You should do videos on finding nice blueprints like the one you used which have detailed drawings on em
@1fresh4503 жыл бұрын
Sure! That's sounds great!
@Bradley_TL2 жыл бұрын
Can you make a texture for this because I want to put this model in Roblox. Also the knife project wont work for me
@huayra_gaming5 ай бұрын
how did you get so smooth blueprints cos mine sucks and have mega pixels
@rebuiltcore3 жыл бұрын
Nice
@1fresh4503 жыл бұрын
Thank you!
@piersonlumaya18373 жыл бұрын
When will part 2 for the engine tutorial come out?
@1fresh4503 жыл бұрын
Sorry for the late reply, it will be coming out soon.
@Ryeliesalt9 ай бұрын
When I make the door outline and window outline and I click "Knife project", it just says "No other selected objects have wire or boundary edges to use for projection". How do I fix it? (Airbus A380)
@jesphillips21936 ай бұрын
Knife project has received several updates since this video, so you need to do this instead: 1: Make sure the object you are protecting is 2D and doesn't have any 3D geometry like a cube (Just delete everything else if using a cube) 2: Go to object mode, select the object you will be projecting onto (fuselage) and go to edit mode 3 Ctrl+Click on the cutter object while in edit mode, and then try knife project. Hope this works if you haven't fixed it yet, it may also help others having issues
@theprussianaviator88243 жыл бұрын
first
@planesofhawaii3 жыл бұрын
When will u publish the video on how to make the cockpit windows and wings?
@1fresh4503 жыл бұрын
As I'm not continuing this A320 series. I am starting a new one where I will make another plane.
@planesofhawaii3 жыл бұрын
@@1fresh450 Ok.
@thatdogewithvr Жыл бұрын
after i seperate the frames of the doors on the plane, the fuselage around it warps and it looks very weird edit: nvm i realized that i had a solidify modifier in my fuselage so i removed it
@ani5z3 жыл бұрын
does this create a hole or is it just like an image?
@lebronlover23233 жыл бұрын
the knife project doesnt work am i doing something wrong?
@1fresh4503 жыл бұрын
What error do you get when doing so?
@lebronlover23233 жыл бұрын
@@1fresh450 it says No other selected objects have wire or boundary edges to use for projection
@Def_74703 жыл бұрын
@@lebronlover2323 oh, i know this is a 2 month old comment and i bet you dont care at this point, but if you do, then heres how its done This maybe a problem with the shape so if you havent curved it, then that could be fixed or you should try removing the fronts of each shape. Hope this helps!
@lebronlover23233 жыл бұрын
@@Def_7470 thnks ill try this (my letter @ key isnt working)
@IshanKoch3 жыл бұрын
@frenchfries42943 жыл бұрын
Im having an issue when i click cut trough and kinfe project and stuff it goes to the wrong places of the plane and in weird shapes
@1fresh4503 жыл бұрын
Join my discord server, I can assist you there, but the issue might be you are not click the X viewpoint.
@Josherrr693 жыл бұрын
It’s about time Jesus Christ
@avxtionwxxb5 ай бұрын
it didnt work, there was an error
@reno23013 жыл бұрын
can I hire you? lol
@bigbumpyboi21973 жыл бұрын
sad my knife projection isnt working out :(
@AirCanada1086 Жыл бұрын
When I tried to make the door it said report :error
@Captain_Gojira2 жыл бұрын
it wont let me add the blueprints
@Josherrr693 жыл бұрын
Lol luv you daddy
@1fresh4503 жыл бұрын
😄
@Goteborg_FivePD2 жыл бұрын
Did not work
@blaine.39913 жыл бұрын
i think fresh is cool
@1fresh4503 жыл бұрын
I agree!
@BaxxxeSDas10 ай бұрын
12:43 HELPPP
@AmauryChihuahua3 жыл бұрын
When i click knife project i get the error:No other selected objects have wires or boundary edges to use this projection. What do i do?
@1fresh4503 жыл бұрын
Have you selected the shape you want to project?
@1fresh4503 жыл бұрын
That error happens if the thing you want to project on isn't selected,
@AmauryChihuahua3 жыл бұрын
@@1fresh450 I selected it
@Def_74703 жыл бұрын
@@1fresh450 i think i know. I had this problem too. I would probably try removing the fronts of the shape and also click a when your in edit mode and have selected both of them. Hope this helps
@AmauryChihuahua3 жыл бұрын
@@Def_7470 ok ill try
@Squawk_7500_RBLX3 жыл бұрын
I stil keep getting the vertices getting dragged over creating a god-awful line making me want to end it all.
@1fresh4503 жыл бұрын
Oof, Join my discord and send me a message. I will try to help you.
@officiallyj.t35653 жыл бұрын
Whens the new video coming out?
@1fresh4503 жыл бұрын
This friday.
@officiallyj.t35653 жыл бұрын
@@1fresh450 its friday :)
@1fresh4503 жыл бұрын
@@officiallyj.t3565 Haha you remembered. I am not home now since I'm stuck somewhere, once I get home, videos everyday!
@Aries-24122 жыл бұрын
I am having a report error
@swiss003development92 жыл бұрын
Thx but if you import it to to X plane you dont see Windows
@Jonas_vdorsselaer29722 жыл бұрын
How do you import from blender to x plane?
@swiss003development92 жыл бұрын
@@Jonas_vdorsselaer2972 ?
@Jonas_vdorsselaer29722 жыл бұрын
@@swiss003development9 nvm about that lol
@eastofenglandemergencyspotting3 жыл бұрын
i fucking hate knife project it made me delete my project because i followed everything, watched ur other knife projection video, bro i even watched 5 other videos i removed faces i selected all when in edit mode i click mesh and knife projection but it just wont work