Blender Tutorial - Easy Scroll Animation

[@raghavgupta1118]

The ideas are just getting better and better with every tutorial

[@victorsuazo4704]

@Zeke Lance InstaPwn it's a sofware? where I found it ?

[@rafvanraevels]

Great one, man. Especially the reverse side of the plane texturing trick!

[@reality990]

Спасибо за туториал, только начал изучать блендер, но ты всё разложил по полочкам в логическом порядке, что даже я смог внести свои изменения и система не порушилась!)

[@Unicycleskill24]

Very well done tutorial, I think you've hit the sweet spot for users that have the basic shortcuts down and don't need every button press given to them.

[@ancientclown]

Still nothing wrong with saying what you are doing, as it allows for making it just by listening and not having to hop back and forth for visual cues.

[@D3kryption]

If anyone is having the issue with switching direction on Blender 2.92 where the scrolls go to the top, switch direction, scroll it all the way out so its flat, then edit the spiral and drag it closer back together. It fixed it for me :)

[@rayhana9259]

thank uuuuuuuuuu , i did it and it worked for me

[@YKChau888]

For those who can't make the scroll. 1. Check if the distance of the plane is too long, you should reduce the distance or increase the turns, 2. Sometimes the loop cut is too low, and as a result, the rolling distance is longer than the vertex in the spiral, therefore you may encounter a wired rectangular shape roll, for this case, try increasing the number of loop cuts. 3. When you scale down the spiral, the distance between the vertex in the spiral change, which means the same problem at points 1 or 2 appears. 4. I highly suggest you turn off the mirror modifier until you are good at the roll.

[@leviackerman0070]

did you manage to do it, if you have can u send me that file

[@georgegryph2672]

For anyone who's having lighting issues in Cycles with the scroll plane mesh clipping through its mirrored side: in the Mirror modifier, enable Bisect on the Y axis

[@jordanhwang]

this tutorial was super creative! love it!

[@ioss1000]

Thanks for sharing what you have learned. it is a lot of knowledge, blender seems like an endless path :) I hope to continue learning little by little. Greetings!

[@3D-Amir]

wow! Such a great tutorial! Thank you and can't wait to see more tutorials from you

[@JM_Gymnastics]

Your videos have taught me how to make cool things in blender.

[@ArtVandelayInc]

God damn. I've just found this channel. Subscribed immediately. Perfect tutorial. 10/10

[@uzaykisi1863]

another useful tutorial from you, thank you

[@AR.Studios.Animation]

I have been wait for so long for something like this thanks so much

[@TheJackFoley]

Great stuff! And it works in Blender 2.79 once you figure out the slight interface differences.

[@rakshitnaidu]

This video is exactly what I needed for my project, thanks

[@leviackerman0070]

did you manage to do it, if you have can u send me that file

[@Sankaresvalue]

I m very happy and intresing your wel explanation

[@Wainis]

Great and fast tutorial. It's a pity I can give only one Thumb Up and not more.

[@SrujanRaghavendra-y9h]

ಬಹಳ ಚೆನ್ನಾಗಿದೆ ನಿಮ್ಮ ಟುಟೋರಿಯಲ್. ಧನ್ಯವಾದ ಗುರುಗಳೇ.

[@jayanthch8390]

wt ff anywhere u go and type this sh*tt in ur language huh???

[@belia5583]

hh finally after 2 hours completed this someone say well done keep going whooo tired

[@leviackerman0070]

did you manage to do it, if you have can u please send me that file

[@sreiscandido]

Excelente. Eu aprendo muito com teus vídeos.

[@wolfie1001]

Love it! thanks

[@aloomia826]

The thumbnail gives me kung fu panda vibes and I love it 🔥 Also the blender>maya was sick 😂

[@iam.2022]

Thank you!

Just the better tutorial in this subject. Thank you very much from Brasil.

[@samoulton8308]

excellent. I had no idea you could manipulate and control an object with an Archimedes curve like that. You be a smaht fellow. :)

[@jimdelsol1941]

Very informative video. Thanks !

[@RonHicks]

Fantastic!

[@VIPLonda]

just amazing video

[@BlockxBuddys_Kinderfilme]

next tutorial i will try out. thanks

[@Mednai4]

Only i thought that he would say "hello everyone, this is your daily dose of the Internet"

[@HashGray]

Ahahah me too !!! The tutorial is amazing though.

[@KIFDRAKON]

Спасибо за урок. не очень сложно и очень интересно. Про стороны материала особенно понравилось.

[@sarojkumarsingh2836]

how to export this and use it in unity

[@Jon-me2lv]

Perfect!

[@blenderzone5446]

amazing tip buddy!!! thanks

[@amanda_andrade__]

Hey if anyone gets anything weird happen when they switch the spiral direction in blender 2.9 just switch to 2.83 this solved the problem for me. Oh yeah forgot to add you can open it back up in 2.9 afterwards.

[@amanda_andrade__]

@Mara Antonucci maybe you have a different issue

[@amanda_andrade__]

@Mara Antonucci okay I'll send you the file maybe you can deconstruct the issue form there. It will have to me when i get home as I don't have the file on my laptop Edit found it drive.google.com/file/d/173D1ZzG6YwqgnKLkoWdqifjlB1rTuacf/view?usp=sharing

[@rowlandmartin85]

I finally was able to make the scroll. It looks good. My question is, how did you get the brass handles. I love those, and I want to put them on mine. Thank you in advance.

[@myztazynizta]

Make a tutorial of the lighting used in the thumbnail render please.

[@pfeffermartin642]

nice

[@ValeGoG]

Очень и очень круто, спасибо :)

[@VHM777]

G reat tutorial. thanks!

[@sakana820]

WOOW!

[@ENG-CT4982]

The best way to give someone the middle finger

[@Ochentaa]

Thank you for the guide! I have a question. I want to import that model into Unreal Engine, do you know how to do it corretly? ChatGPT says that i need to apply all transforms but it brokes everything

[@ranzabaro9594]

stuck in the same thing too. If you try to apply modifiers it breaks everything.

[@Ochentaa]

@@ranzabaro9594 i could do it in this way only: Put closed scroll on the scene, make animation in blender, put that animation into the scene and put opened scroll. Closed -> destroy -> animation -> destroy -> Opened scroll 😁

[@KADAMBACREATION]

This tutorial was superbbb bro. Can u teach us to do this like real scroll physics. This scroll opening was very stiff.

[@jayanthch8390]

thank god (youtube algorithm ) i found u 1 sub added

[@YugiMango]

Awesome tutorial, when i parent the objects to the empty and move the empty everything goes whack like i was moving the scroll before?

[@Ochentaa]

How to export this animation correctly? I made 2 keys (i was using curve spiral to make animation). But when i try to import the same project into a new one (blanc) there is nothing (no modifiers, no animation). How to export animation correctly?

[@corderrisglass1230]

try project from view(bounds)

[@france5238]

I got recommend this on google

[@Malatach]

When setting the curve to the -y axis the mirror clips in the middle of the original half of the scroll and moving it on the y axis only moves the mirror. The original half of the scroll stays in a fixed position and rotates

[@anupamkumar4109]

Next please do animation on hair stranding

[@leomazzei2176]

Amazing tutorial! I gave it a shot and was able to make it, but, on my renders, I get a strange horizontal seam cutting through my paper, where the object and it's "mirror" touch. Viewport previews are good, though, no seams.

[@dorex2007]

I'm having the same issue. Works good in Eevee, but I see the line in Cycles> I've tried adjusting the UV, the image itself, the texture mapping, but nothing seems to work. Other than that one thing that spoils the whole thing, it's a good tutorial

[@jeqpi]

Which software do you use to record the screen?

[@victoriamaia2833]

problably the answer is no but, this kind of animation can be exported in GLB?

[@migrantmemoirs]

in the middle , in object mode it seems like scrolled but in object mode it looks flat . problem facing , what to do

[@gotampaliwal6203]

can u make an simple environment tutorial

[@migrantmemoirs]

bro in my case when I mirror the clip , it does not attach with each other, there are blank space in between , help me out

[@schnippeldifit7805]

how can i export this animation into unity?

[@anishalamansari9887]

Compositing nodes basics tutorials,plz

[@yima8282]

I ran into the the problem of the paper following the curve, rather than staying in a fixed postion when I move the curves as shown. Does anyone know what i did wrong?

[@abhirutmeherishi5738]

Could you please explain how can I bake this out and take this into unity?

[@Ochentaa]

Did u figure it out how to export this correctly? I got a problem with exporting (even on the same blender FBX doesnt export correctly itself)

[@YugiMango]

also any ideas for getting this working in unity?

[@Ochentaa]

did u figure it out?

[@rowlandmartin85]

I don't know how to do those cut lines. You said ctrl r but It just makes me turn the image around. Also, the mirror in the modifier did not work. I just did duplicate.

[@AR.Studios.Animation]

hey how would you export this to use in Iclone7, Unreal or in FBX

[@Ochentaa]

did u figure it out?

[@mittyboy]

WHAT ver. are you using

[@GoodGodFatherGGF]

So, I've got it now where my rollers are making big circles, rather than rotating, as I open and close the spiral. Any tips on that? Having a hard time figuring where I went wrong here. I've gone through the steps a bunch of times now.

[@piggychannel6682]

I had the same problem but to fix it you have to go to object properties and set the location and rotation x,y,z to 0

[@GoodGodFatherGGF]

@@piggychannel6682 ok cool, I'll give it a shot

[@piggychannel6682]

@@GoodGodFatherGGF lol i just realized it took 10 months..

[@testi8172]

Could you explain how you set up the work space on 9:01

[@BlenderMadeEasy]

Click in the top right corner of the viewport and drag out a new window. Then switch it to the UV Image Editor! Hopefully that helps!

[@isaiahwilson9823]

is that a mode or something cuz I don't know what to do the thing on the left plz tell me what to do 9:04

[@mariabloom5145]

You need to click and drag on the rounded corner and then press Shift+f10 twice with the cursor over the right viewport

[@leviackerman0070]

how to download the blender file

[@madhavivibhavam1520]

How to save the changed textures bro... If I change to layout textures are not seen

[@esraashawrdi9742]

did u get answer ?

[@kelvinkleden4817]

How to export an FBX file to Unity? Because not all data is saved in the FBX file

[@leviackerman0070]

did you manage to do it, if you have can u send me that file

[@k1ngsmanyt391]

Anyone got any ideas...I'm tryna attach diamonds to the scroll handle and make it follow the exact path..can't seem to get it to work

[@v.s.a3826]

0:19 How is that possible. Can you please tell.

[@sailendrahansda5397]

Magic

[@rowlandmartin85]

Only the bottom part of my scroll moves. I do not understand why this is the case

[@azzyz06]

how to import in unity

[@braj108]

This is really great, but unfortunately I am having a normals or back facing issue where the blackface for the side not facing the camera will not be shown, no matter what opacity settings or what way the normals are pointing, and since it is on a curve, you inevitably see the issue. It is fine in unshaded view. Can anyone help me understand what is going on, is anyone seeing this? Thanks!

[@braj108]

Ah, I changed the material blend mode to alpha clip and it is fine 😂 I feel a little silly. I I could swear I tried it earlier, but I guess not.

[@BurnEdOutOne]

When I set the handle transformation rotation constraint to -360`, it changes the pivot point of the scroll to the bottom side, and so it spins outside of the scroll paper. Can't figure out what I'm doing wrong... EDIT: Setting the origin point of the handle to the center of gravity seems to have helped. Hopefully that won't cause later problems with the mirror modifier and it not being centered on an axis. I will update if I run into more problems.

[@GoodGodFatherGGF]

Yeah, this is what I'm struggling with as well. So I guess I have to figure out center of gravity? IDK, but I guess that gives me a starting point to look in to it.

[@RealMooseYT]

omg thank u. u r legend

[@wijdanakhmad]

3:27 how to get that?

[@itainehama9425]

on 1:20, I typed "curve"' and only found 2 results (and not the correct ones) help?

[@BlenderMadeEasy]

Do you have the latest version of Blender installed?

[@itainehama9425]

@@BlenderMadeEasy when I launch blender, a small window with an image and some recent files appears. That window says v2.83.1 so I asume that i do not have the newest virsion Should I go to the website and reinstall? Seems kinds inefficient. Thank you very much for your help and attention!!

[@korahd6937]

I was like you but I realised that I don't have the last version

[@sauravsharma8791]

can some one tell me how to bake it

[@mattl4174]

Can't for the life of me get the flat part to come out after I switch directions of the spiral Its works fine when its the wrong direction but not after I flip it.

[@calvindebeverly7410]

Nowhere in the video do you indicate the exact dimensions of the original plane at least that I can find. "About" could have been better if you had hit the N key and shown us the dimensions.

[@AlvosTiger]

b > M

[@rowlandmartin85]

Anybody having issues with their scrolls after the Blender 3.1 update. Mine has a black line going though the middle of it.

[@dorex2007]

I'm having the same issue in 3.5 Works good in Eevee, but I see the line in Cycles> I've tried adjusting the UV, the image itself, the texture mapping, but nothing seems to work. Other than that one thing that spoils the whole thing, it's a good tutorial

[@rowlandmartin85]

It’s a overlapping issue. Those two parts of the scroll you have to meet but not overlap. It’s required trying to line it up.

[@rose_watr]

The mesh is not rolling properly ? Method 1 : delete curve modifier and add again Method 2 : 1) 2:22 make sure SPIRAL is in apposite side of MESH (go to edit mode to see where the original MESH is and put SPIRAL where the mirrored MESH is 2) SPIRAL'S origin should be outside spiral -- Select SPIRAL --> Shift + right (it will move 3d curser) click anywhere near spiral... it should be outside of SPIRAL--> Right click --> Set Origin --> Origin to 3D curser If this doesn't work make sure : 1) 2:35 Extrud 2) 3:21 flip SPIRAL 3) 3:46

[@Mari_Selalu_Berbuat_Kebaikan]

@blendermadeeasy please pin this comment, thank you rahul 🙏

[@naidenhadjiev922]

why is my plane moving while I I move the spiral?

[@leviackerman0070]

did you manage to do it, if you have can u send me that file

[@naidenhadjiev922]

@@leviackerman0070 I think I managed to sort it out, it was a matter of alignment of the origins, not sure if I can repeat it again haha

[@leviackerman0070]

@@naidenhadjiev922 u don't have that file saved?

[@jackgu9889]

0:19waait what how did u

[@he4rtbe473]

Anyone here did this and can share the file? Need it super badly but it isn't working for me :)

[@leviackerman0070]

did you manage to get it, if you have can please send me that file

[@dropframe7188]

TH MIRROR MODIFIER IS NOT WORKING WITH ME 00:38

[@gpink7]

Try to apply the plane's location before adding the mirror modifier. It worked for me.

[@dropframe7188]

@@gpink7 From where we can apply it ?

[@gpink7]

@@dropframe7188 You can press Ctrl + A and select Location to apply It.

[@dropframe7188]

Thank yo so much​ @Guilherme Lopes . It worked 👍

[@the1238ee]

3rd

[@joserosa9928]

Funciona na bge?

[@injjwetrust4678]

Damn it.. I came for the animation tutorial.. oh well :(

[@mizu254]

i am facing problem mirroring the plane ....... it just won't mirror it no matter what

[@gpink7]

Have you tried to apply the plane's location before adding the mirror modifier?

[@GyuFX]

0:19 what?

[@Maciek456132]

0:18 wtf was that?

[@sailendrahansda5397]

Magic

[@colinboschma]

First

[@kritrom]

THE HECK WAS THAT DELETE!?

[@nazar2383]

Great tut, but it made me feel like after so much time I still don`t know a lot of stuff, so dislike for that.

[@connor5422]

this one's fucked because of the new update. unfortunate.