Man i really love how professional all this content is.. Really high end content.. Doing the job right and teaching others how to do it right.. not some half-ass way! Good job love the content!
@michaelbodea9 жыл бұрын
Also did a acura tl and that was a pain in the ass to do a tri coat on! Good job!
@dtaylor262310 күн бұрын
My Dad was a body man and a professional painter. His nickname was "hotplate" as a guy told me after Dad died. It had something to do with his technique for painting. He was the best painter around. Unfortunately he did not wear mask as often as he should have and suffered at end of life. He eventually ended up establishing a school at the Maine State Prison teaching Body & Fender classes. He ended up wearing mask! LOL Thank you for displaying your craft.
@Petzkec6 жыл бұрын
Wanted to say thanks for your video. I watched this video about 10 times and took all advice. Painted my first tri-coat and it turned out great. Thanks again for the detailed instructions.
@user-bu4jy2cm6n Жыл бұрын
Excellent workmanship
@TheGunmanChannel9 жыл бұрын
6 coats is a long time to get coverage, what basecoat do you use?
@Refinishnetwork9 жыл бұрын
The Gunman This was Glasurit 90 line, most colors are 2 1/2 coats over most undercoat values, but white over black would take quite a bit more. If this were RM Onyx production (solvent) it just might cover in 2 1/2-3 coats, solid colors cover really well in that line.
@TheGunmanChannel9 жыл бұрын
Thanks for the reply Jim, here in Australia we still mainly use Solvent and everyone tells me that waterbase covers in 1+1/2 coats so it sounded weird. I get full coverage in 3 from most solvent ranges 55 Glasurit, Standox Solvent, Dupont and Metalux. Great channel, keep up the good work.
@Refinishnetwork9 жыл бұрын
The Gunman Axalta (dupont) waterborne has a 1 1/2 application for basecoat, as far as I am aware every other waterborne is at least 2 1/2 when applied over an appropriate shade of primer. Thanks, you too.
@frankietrujillo6489 жыл бұрын
The Gunman lffccnxfkj jkm ND R jb b lb uln n n. MLS. Nn I jjjhv hc..nm j mm.
@TwentytenS4B85 жыл бұрын
Tri-layers are the most difficult to color match and blend. The drop coat is the make or break here but a good painter makes it look easy.
@aphillips2842 жыл бұрын
Nice paint job
@netman884 жыл бұрын
Very nice. I'm paying for my used vehicle repainted given the dealer didn't do a good job as a CPO (touch up).
@rikkaelliott22859 жыл бұрын
Hey jimmo glad to see your back, I'm still using the rm diamont an us erm the White sealer for most jobs so I understand where your coming from, keep up the great work 👍
@Refinishnetwork9 жыл бұрын
Rikka Elliott #bebraveorgohome I miss diamont, what an awesome paint line that is.
@Handlehandlebars6 күн бұрын
Im going to be doing a complete tricoat.. a porsch olive green metallic with gold peral mid coat..question is when appling the mid coat..would u shoot for somthing lighter then a meduim wetcoat? And of course good overlap ...8 dont wana go to heavy. Using an lph 400
@theirishman0889 жыл бұрын
Nice job. The Gm 800j has been a problem for quite a few shops out here. It will show up too white or too yellow. Just a headache! Thanks for the videos.
@PhillipHall019 жыл бұрын
Good to see you back and with a good informative video as well. I am really eager to see what you think about the sata 5000's should be an interesting video....
@crazyforblues19676 жыл бұрын
Very informative. Thanks for your videos! I'll be doing an all over white pearl job soon, and I've never done tri coat before. Doesn't seem too tough, just be a robot right? 😀👍
@yteezi17 жыл бұрын
How did you get a good match/blend from the bumper to the hood when you painted them at different times and locations? Is that just a skilled eye and memory?
@hondatrix6 жыл бұрын
Great video, have to do a bumper and this will help me bend it properly, thanks
@thewiseguy71006 жыл бұрын
How long after new body paint is it safe to wash my car. It’s been 3 days and really dirty
@LuWeiHuang9 жыл бұрын
Is blending necessary? My Shop is installing new bumper, driver's side fender, possibly hood, and also the driver door is a little scratched (probably just clear coat damage) I'm just really skeptical of them sanding down my door or blending onto my factory paint... Any recommendations on what I should do? My car is 13' GTI paint code LB9A
@flightmedic716910 ай бұрын
I have a car that they painted but the color didn’t match. I will be repainting it. Do you know how I need to prep for that ? Do I need to re sand, re primer and paint? Thanks.
@Refinishnetwork9 ай бұрын
You would need to re-sand, apply color and clear.
@bondomerchant9 жыл бұрын
nice vid jimmo...keep it up an ya might be able to make a living at it...
@MrDavid120017 жыл бұрын
Good job... Keep up the good work
@jiwandhaliwal2120 Жыл бұрын
Can I use any solid white as basecoat?
@cartips53077 жыл бұрын
Really awesome vid thanks for the content
@IMPACTFX4 жыл бұрын
I know this is an old video, but in alot of blend videos no one talks about the process of how they sanded the car in preparation of a blend, where to sand 800-1000 vs 400-600 in order for base coverage vs clear blend. What was your process here?
@Michigunner3 жыл бұрын
If your not painting for coverage(repaired area) 800 everywhere else. 400/600 your primed areas for finish sanding
@JeffTso9 жыл бұрын
nice work, iwata is my personal favorite guns also over other brands too!! I noticed you moved your gun pretty quick when spraying the base coats. is it just the way how ppl suppose to spray 90 line or just your way doing the job? ive never sprayed 90 line before. still on 55 line.
@MrFireman1649 жыл бұрын
Very nice !
@kentma75164 жыл бұрын
no explanation on the steps needs more details on how to do the blend what you mix in, giving model numbers won't trigger any info, rather confuses. just my 2 cents, if this was for pros and not for new guys, then it would be awesome to mention that from the get-go. thx
@paintbykevin886 Жыл бұрын
Why is the whole back of the car not covered
@Refinishnetwork Жыл бұрын
Spray mask
@Jalvarez26 жыл бұрын
Does anyone know what color is the base coat before the 2 pearl coat? Is it a satin white or a pearl/beige white?
@jake907708 жыл бұрын
Nice job!
@deniszemcov9 жыл бұрын
exellent job man
@eversilva62557 жыл бұрын
Thanks I love you work
@MrWenxie9 жыл бұрын
nice video.. good work man,
@MD-ww7uh9 жыл бұрын
What size tip are you using for the ws400? Also what psi do you spray at the wall Great Video!
@Refinishnetwork9 жыл бұрын
Michael DeFrancesco The wall is usually between 50-80, the pressure drops depending on the length of the hose so I regulate it at the base of the gun around 27-28 psi.
@MD-ww7uh9 жыл бұрын
Not to change the subject. I have a Sata Jet 4000 RP with 1.4 tip digital. What psi should I be spraying at with that gun.
@Refinishnetwork9 жыл бұрын
29 psi at the inlet I am fairly certain is what my Sata rep recommended for that gun but I may be confusing it with the HVLP. I don't have much experience yet with that gun although I do have one with a 1.2. I'm sure a Sata painter will be along to tell us.
@michaelbodea9 жыл бұрын
Refinish Network Depending on what color you are painting and your set up, and The Rp .. you can run it as low as 22 and high as 26. I stick at 22, comes out nice and especially with metallics lays out nice
@frankiej.55819 жыл бұрын
nice job man hey do you collapse the pps liner or no
@alexhudson6886 жыл бұрын
I have been fighting shadows on PPG pearl white 839 spraying Acura NSX. Have you had any experience with this color? I also use a wet bed. It's not really noticeable until the cars are taken outdoors. Suggestions?
@muhammmedayazur9894 жыл бұрын
I am working in Dubai as painter but 070parel not maching can you give me some tips
@mikefigueroa51626 жыл бұрын
How would one repair small rock chips in a 3 stage white pearl without having to do an entire panel? Can it be done? Any info would really help!
@cardiel44 жыл бұрын
You will need to do the entire panel.
@AnteUp348 жыл бұрын
Go Justin! Great video!
@raymondredilla72043 жыл бұрын
Nice way to spray hoods start from side work to center center to side. Rays repair
@angelcaban23877 жыл бұрын
Awsome channel
@respectboss12082 жыл бұрын
Wow
@mudayahmed6 жыл бұрын
how many minutes to wait between coats?
@Ryan_19977 жыл бұрын
when painting metallic pearl white, what would be best primer to use? black or a really light gray?
@MK-rb5lp6 жыл бұрын
Use a light gray or almost white. Will make your spraying easier and save on materials. Make sure to do a 50 percent overlap on each spray pattern and do 2 coats
@rajeshbeechookrajesh39229 жыл бұрын
What spray gun is best to work n..won to buy one ..nn
@TheKutmastakurt12 жыл бұрын
Hopefully this will work for a turquoise base pearl try coat.
@brandinbrown4445 Жыл бұрын
Any luck?
@CaptainKaos7557 жыл бұрын
What about adhesion promoter before the sealer was applied
@goudste5 жыл бұрын
Raw plastic requires it. Primed plastics can use it but not required. Also Glasurit 90 has sealers with built in adhesion promoter.
@spoolinperformance19 жыл бұрын
My iwata ws400 full open has a big dead spot in the middle of the fan pattern. Do you close the fan tighter on yours ?
@Refinishnetwork9 жыл бұрын
Philip Yeung I use mine wide open, no dead spot that I've noticed.
@quocvbien8 жыл бұрын
likely your pressure is too high.
@mardegan868 жыл бұрын
i took some fender flares to a body shop to get painted, bodyshop owner said he needed the vin number to order right color, it is a pearl white, how ever it turned out slightly different than truck body. is that normal or it could be the body shop who missed some steps
@mardegan868 жыл бұрын
my bumpers are metal too but i looked at a plastic piece on the roof and youre right the color is different, plastic piece is exatly same color as my fenders turned out. thanks tho.
@chadwickwicky672 жыл бұрын
Whenever a part is painted separately without being able to use the exact batch of paint that the vehicle was painted with (even then it’s possible to look dofferent) all you can do is hope it’s not a readily noticeable difference. There’s too many variables that can make a color look different. Doing spray outs like demonstrated in this video and blending is how you get an exact panel to panel color match.
@britman1856_ Жыл бұрын
thats very common on metallic or pearlescent paints. it can all depend on how many coats of metallic/pearlescent they did or how thick they sprayed it on. it can change the color
@MrAsd52009 жыл бұрын
gooooooooooooooooooooooooooooooooooooooood
@uhklixzy9 жыл бұрын
how much would a paint job like this cost?
@StainGraffiti9 жыл бұрын
+Tribal Seems like an insurance job, somewhere around 2500+ being a new car and tri-coat. Id say even more, depends on the shop also. Also I dont know if the car was in a collision or if it was keyed, etc. Collision job would be more. My shop did jobs like this all week, and they werent cheap
@jairosimbeye6095 жыл бұрын
Hi
@7sunsetmaro76 жыл бұрын
Paints over black something on door @ 4:04
@AppleBag10007 жыл бұрын
i was looking for paint for my bumper and it is a multi stage pearl, i understand base coat and clear but this calls for a mid coat , what is that?, this is for a 2013 Hyundai Genesis: Casablanca White Pearl YW6, will a quart cover the bumper
@nawlyns5046 жыл бұрын
your mid coat is the coat that contains the pearl. So it's your base color (first coat) then your pearl (mid-coat) and then your clear (third coat). It's called a Tri-coat
@PatrickBateman9692 жыл бұрын
That does not look like the Nissan's pearl white
@MrMagee789 жыл бұрын
Can you paint right over that black primer on bumper? I thought u could not?
@Refinishnetwork9 жыл бұрын
MrMagee78 You have to solvent test it first, if they used a decent primer you can topcoat it directly but most of the time they don't.
@JoBar120069 жыл бұрын
Refinish Network im new into the industry straight outta autobody school, how do you solvent test e-coat?