Blending Tricky Paint Colors

[@Justntoys]

You got me. On the toilet. 😂

[@nunyobiznes]

Bro same. Biggest smile on my face when he said it 😂😂😂

[@OlRider6485]

I,m 63...Painted every thing I could all my life...Still do,in it...Air bush as well...Vary nice job...Love yur non stop stile...I do the same thing...lol..Never have trouble...yur right..Its just paint..

[@PaintSociety]

Just paint brotha !!

[@kareemmeerak9360]

15:00 don't over think it.... Its just paint... Just that alone helped me relax while painting... My jobs are 25% better now 💯🎨💪🏼

[@PaintSociety]

Yup! It’s what I live by

[@m-projekt]

Yeah me too! With that last line is really easier to get into a project...

[@philtucker1224]

I like this format. You are teaching me so much. Live long and prosper my friend!

[@realestreaIist]

I've been painting cars for 15 years now. When I started I worked at a place that had really cheap product and it took sometimes 10 coats to cover the primer. Now I use Glasurit 90 line and I spray one wet coat and one effect coat and it's fully covered. I'll spray a third if trying to blend. I do agree these dark metallic greys are a tricky color to blend. They tend to get a cloudy effect happening but, that blending clear you sprayed helps a lot with that and that DV1 is like you said a really nice gun.

[@faroukkhan6777]

Thanks Brian,, for all your great work,, and sharing,, enjoy 😊💯

[@smk1685]

Keep up the awesome work! I definitely get many tips and pointers from your videos. I’m new to the game and picked up a lot from you so I appreciate it all.

[@fredc8618]

I can tell you were having a good day thanks for all the great content

[@sjs202able]

Brian, just want to say thanks man, I been watching your videos, I’ve always been interested in car paint, and how it’s done (especially blending, and those tri-coats), and you break it down so well, I’ve learned a lot from watching, and this is what I love about youtube - good people, sharing some knowledge and having good times along the way - and I’m so far away in Western Australia, watching some quality work going down on the other side of the world 👍👍

[@PaintSociety]

Thanks Steve for watching !

[@Q50WO]

Love the uncut series. Thanks brother!

[@wlodown]

Always learning from you Brian. finally got everything for my paint job. going to first do a practice bumper or two then I'm jumping in. Wish me luck.

[@albertmicallef5798]

Great job love watching you spray cars so I tried your technique the other day actually today on a 1954 Chevy hood keeping trigger on like your painting with a brush turned out really good give an extra coat of clear three instead of two because I don’t put too heavy of coats on when I do it just a nice wet coat really enjoyed watching some of your Serious about painting you’re absolutely correct don’t overthink it it’s just pain thank you Brian🤔

[@toetoe6733]

Love this masters energy

[@endercozy9578]

This guy need more subs and likes. Well done buddy, nice clean work..

[@ricardorivera2836]

Yo I was on the toilet 😂😂😂... still am actually, you probably are too👀

[@TombstoneActual42]

Guilty

[@dogemcmoon9644]

Your feud between the "lady" should be a running gag 😂

[@gewing61]

Love the shop videos. Thanks for sharing your knowledge and skill!

[@marcopolo9255]

Yes I’m sitting in the toilet it’s 7:40 pm . And yes! . I’m think that you’re a good!! teacher so please doing what you doing because I’m petty sure same one also copying you! and give us a great idea !! thanks my man a lot . I’m from Salvador very nice to meet you. Very,very good job. Also I’m resident from nyc!!

[@bradmaas6875]

I watched one last night and had to turn it off. I was thinking that it was a bit sketchy, then he pulled out a razor blade and started scraping the runs off. I'm not to your level, but I'm still learning. Thanx

[@HiFiInsider]

getting my 95 Civic hood, trunk and quarters painted. Do you think I will have an issue getting the color to match when I have the door and fenders painted? The shop doing it says no but I like to get your opinion.

[@mandymoo7406]

don't be afraid just do it,great video as always,i love the way you don't stress

[@d_hell_shaker4238]

What do I use if I have the Sikkens paint system as my blending additive as a wet bed can you help me out here Love your teaching videos.

[@MrPuRpLeHaZeD]

I’ve grown up of a family owned business and me being the youngest I always do things different. My brothers still don’t believe in using the microfibers but it lifts all the dirt. Use over and over I actually use two at once. One wet one dry and I keep separate from water born cleaner as well because water born and wax and grease remover don’t make well for a mix. Simple Walmart 30pack for like 10-15$ and last for months and months

[@JoseCruz-zn9pv]

Very nice work . What's up with that roll of tape ?

[@eddieduzzit3807]

tuning in from the toilet bud, keep the videos coming! 💯

[@allenpearson9716]

Off-topic, but do you have any videos on removing trim or fenders on cars prior to painting?

[@Robsbrd99]

I have a 2008 salsa red 4runne. I'm getting the hood and driver front fender painted a quality shop like yours. Should I be concerned about the blend between the fender and the driver door?

[@sniperpaintcorrection]

What a beautiful color on that nsx

[@donovanolds]

Have you ever tried tacking with a microfiber? It's a game changer! The panel will feel smooth with a regular tack rag but if you go over it with a microfiber you can feel all the junk the tack rag missed. It has made my jobs 10 times cleaner!

[@PaintSociety]

Will try it !

[@mastLog1c]

Hi Brian, when blending, once you apply sealer do you give it time before you apply blend

[@Abel3270]

The sand paper said “See ya”🤣🤣🤣

[@moisesrobles7884]

San Antonio's smashing the like botton yahoooooooooo kaboooooooooooooom

[@willywonka2917]

Brian. Can you inform us where to locate / purchase the trim removal tool(s), please. Grazie!

[@medicineman1202]

How do you deal with chemicals? I sprays a small repair and my tongue went numb. I don't know if it was the hitek fast reducer or what because I never experienced anything like that before

[@sealisland1]

Glad to see the UV come out. I love that stuff. Probably could have used it instead of the 2k.

[@dateatorjr9671]

Really like this format. 👍🏻

[@scottymathews9666]

Can you help me? I’m trying to blend house of color some dark spots that I had. Do you have any ideas on what I could do?

[@syedalam4729]

Question do factory uses 2k clear or 1k? Which you do you use? What brand of paint does Acura uses?

[@maxmeyer74]

Love the new format. XL for the win.

[@deankay4434]

Brian, Not so much in this video, but using a guide coat is required on many projects like restorations on truck bed sides or others. I have seen many use cheap flat black to Evercoat powder pad, plus SEM. Why wouldn’t a simple spray can of RED primer work as a guide coat over gray, a contrasting color? SEM can be pricey considering it’s going to be on the floor, while Evercoat fills pin holes and perhaps some fine sand scratches. Either way, they do a job to help us get the repair flat but still ends up on the floor. The stuff on the floor is part of the repair, but just curious on the contrasting primer thoughts. Thanks. I Miss the co-worker ribbing, tapping on the oil pan with a small hammer from the far un-seen side, when your buddy starts up a engine he just finished, or counting the lunchtime pickles stuck to the ceiling where a group sits to eat. 23 was our record. It all fun until someone gets mustard in their eye. :) Retired ASE Master Tech

[@GossDor]

Hi! Why you put clear base when yo do a fender and you dont with 2 doors? Thanks

[@HEADBANGRR]

Hello Brian, I noticed you didn't use a paint spot blender here. Is it better NOT to use a paint spot blender VS using a paint spot blender? Great content thank you

[@honoredsage4946]

So you did take an 800 grit to that than buffed it?

[@bscunningham12]

True nob question: what exactly is in the water based cleaner?

[@JosePerez-hp4mt]

Bryan can you just buff clear with out sanding the clear?

[@djsuretay1]

I’ve joined the channel question where are you guys located

[@Djimenez71]

I’m installing a door that I pick from the junk yard, the door is a different color, in good condition, my question is how much I remove? Should I finish with 800 or 600? Thanks ahead of time.

[@philipmalan5336]

Depends on the colour, metalic or solid? No small dents? No stone chips? If you paint over stone chips they will look like fish eyes. Otherwise, just wet sand until evenly dull. 600 for a solid colour, 1200 for a metalic.

[@sanjs6235]

Hi love the videos. Just had a question: What is the best way of getting rid of a tape line/ clear coat line? I bought a car and the side of it was re painted. There are clear coat lines in the door jams and there is some over spray where the fuel filler cap is. Is there a cheap/easy way or do I have to get the whole rear quarter done. How much does it roughly cost?

[@moisesrobles7884]

Love this job bro and I'm smashing my like botton yahoooooooooo kaboooooooooooooom

[@redeemedautobody5497]

Microfiber to clean in the booth!? Gotta try that!

[@theberengersniper]

2:15 - is it an optical illusion or does that door gap get way bigger as it goes up?

[@PaintSociety]

It’s an even gap

[@valmin5589]

Why did you use the UV primer instead of using the same grey primer ? Thanks!

[@xavierlipscomb2000]

Do you apply clear base coat additive to the edges with every pass of colored base? Or just the first pass?

[@AnManHydro]

❤Bringing my game up❤

[@qulamande4558]

Hey Brian, just have some paint missing on my bonnet, about an inch in diameter. I'm okay with blending the panel to a wet edge using the clear base coat & reducer. However, after the panel's colour has been completely blended, do I need to clear the whole bonnet? Could I clear only around the area and then sand and polish the edge smooth? I am thinking of using my small 70L compressor and either a wide fan airbrush or a small spray gun. Am I in the right direction or is my approach going to suck? Loving the videos btw, really helping me gain more confidence to start painting my cars.

[@rodneynelson3862]

Great Video! Great Blending.

[@ROB_81]

Nice work man!!!

[@mikegaming3826]

I bought the color code for my car its molten orange from ford, now the problem is that the red underneath the metallic looks like its to dark, what does that mean? Wrong color red or not enough metallic?

[@adriancho1742]

Can I get clear base online? Can't get it locally.

[@adriancheung5238]

I wonder if there any video you did a paint job on sport bike fairing ... need instruction how to paint motorcycles fairing.

[@ryancasey4807]

I found something... Another great video :)

[@JamesBond-op3ce]

Hi mi friend I would like to know if you have a video with all your taping techniques,that would be very helpful thanks man.

[@PaintSociety]

Yes i do. Check out my library.

[@bbrry93]

So ru triggering it when ur spraying the base or ru holding it down to blend? I’m having problems with blending and I’m leaving like halos around the spot job when it comes to grey metallic color

[@marchindy]

Did you get the idea go use a micro fiber towel from motivated painters? You had mentioned his channel in a video one time and I have been suscriber since. Thanks for the video, like the new format as well.

[@PaintSociety]

Him and a few others

[@isurusalinga1575]

Good job bro.

[@Ldavidable]

What's the brand of the UV light?

[@husky1232]

Love these uncut videos thank you

[@edwinyapeter5428]

Hi. Greeting from fellow Tinter. Just want to know what is the code and the name of the color?

[@drywalljunkie6969]

Performance red pearl new car ,hopefully match as well as you new fender to be painted and installed .very nervous about paint match .

[@PaintSociety]

Performance red is very tough and needs to be blended

[@king199m]

Hi brian, could you go over solvent pop/fish eye in one video that be great appreciate it 🙏

[@gabstazx1000]

Can I substitute clear coat for clear base On the edge of my blends? thank you @paintsociety

[@robertocosorio9700]

You are Awesome keep the videos coming

[@mrbigrod]

I got TCP GLOBALS "BRILLIANT SILVER FIREMIST" and it can't be blended.. Any ideas

[@kkwong-f1j]

May i know what brand is that uv light ?

[@yaboyshotguns5051]

Looks awesome keep up the good work 🙏🏻

[@wonderwalls3565]

I bought a duplicolo can and pen to fix a few scratches on my Elantra. I matached the code of my car paint with duplicolor index/manual but the new color is kind of bright and my car's color is dark. does any one know how can I make the new color a bit darker? My car' color code is N5S and the can that I bought is DSH54 and the touch up pen is hcth6-c got them from the manual but they dont match.

[@772777777777777]

Has any one used sx840 uniform finish blender.... i found when blending with this the edges of the sx840 blender react almost wanting to crinkle....which is very weird cus the panel is super clean wax and degrease and wiped down with glass cleaner... i used it on few different jobs and when base over the blender same issue the edge react.. using nason ..and transtar base coats.

[@warcraftk5139]

You guys are awesome nice work.

[@juanrojas4722]

Just recently started watching ur videos .. love how u blend the colors .. where did u learn ur profession ive always wanted to become a painter love the b4 and after

[@kevinhekers2380]

Large, i fit in medium but when my hands get sweaty its imposible to get them off i need to destroy them

[@user-wq3dp2dv4l]

bro what's the name of the paint which have small bright particles shining plzzz reply

[@Casual_Cheetah]

Really love your videos! Really helps me with my own jobs. You use Sikkens right? What other paint systems have you used before? How does the Sikkens compare? I have been offered a Sikkens system hence the question. Cheers from Namibia!

[@PaintSociety]

Ppg, rm, standox, sikkens is the best

[@slb6440]

Paint Society is show ⭐

[@bigmikez3128]

Bro I’m loving this series!! Don’t stop the other one tho I love those to! Lol Thanks for the great videos bro that job came out sweeet!!!

[@PaintSociety]

Thanks Mike!

[@kamildarek3425]

Great series Brian

[@josea7422]

So you retired the ws400?

[@sonicboom460]

Really great instruction, much appreciated. Thank you.

[@lebuckus879]

Hello Brian, so that wet bed is pretty much reduced clearcoat? And it becomes dry right?

[@nickpage7116]

I've noticed u lean more to the charcoal grey colors they look good...

[@lamadan70]

Awesome paintjob!

[@kevinhekers2380]

I have not painted a thing for like 2 months and tommorow i need to paint a mercedes sprinter huge van complete respray in 2k white 😬 wish me luck 😅😂

[@MegaBstorm]

I have a similar repair issue with my car. My question is when you sanded 800 grit on the entire panel that needed repair how deep did you sand? Did you sand all way to the primer or down to the base coat?

[@Hurdmainesgarage]

Just scuffed it to dull it.

[@russellmcbrayer5]

Awesome job! Great video.

[@franciscojjacinto826]

You should do one about tinting color

[@Arnoldzesati889]

Nice job! On your clear coat/blending additive what is the mixing ratio? Thanks Brian 👍🏼

[@relentlessbandit]

Forgive my ignorance but what is 'clear blending additive'?

[@angelograziano8712]

You are awesome brotha thanks for the video i enjoyed it

[@2koolforyou88]

What's kind of pad you use on the DA

[@raulnieto8319]

What number grade sandpaper do you use at the end to send the complete door

[@jonathanbrown1141]

800 grit for blends

[@Ontheroadbrogymgo]

Great video! Don’t you just love Norton sandpiper? Better then 3M in my opinion.

[@PaintSociety]

Hi. Wasn’t Norton. It is eagle