Block Sanding | Make It Straight | Lugnuts Garage

How we get our trucks so straight.. The long process we go through to produce rolling works of art.

[@stevejanka361]

Good evening, what brand of long block is the blue block sander that you use on the bedside. It looks like it really works great. Thank you.

[@bobbydelamar606]

Awesome, thank you. Any tips on replacing body panels. My 1970 Roadrunner needs a little body and interior work.

[@esteemedenergy]

Great job, thank you.

[@gladememmott3001]

Good 😊 stuff

[@Sarfrozkhan]

I still donot understand the proper use of dry guide coat and when to apply it???

[@mrdon81]

it makes it easyer to see the difference between high and low spots. you apply it so you can see the difference with what part is sanded and what is not, parts that stay black are the lower spots. so you know where to sand more, and where not to sand.. or what part maybe needs a bit more putty to fill up. you can use it when sanding with 80 grit on putty as a guide coat, or use it when sanding with 1000+ sandpaper to see if all the scratches are gone before painting.

[@courtneylewis9500]

Great job thanks for that, what do you do for the low spot?

[@stizandelasage]

Im with my orbital 320 and water 💧 smooth and even and im not tired

[@robertcampbell5485]

That only works if it was already straight to begin with at that point your just smoothing out the finish not correcting anything

[@robertcampbell5605]

block sand these nuts!

[@tomd7861]

somepin came in da mail fer u today

[@robertcampbell5485]

What?

[@codyfeatherstone3901]

You can use cheap black spray paint for guide coat

[@MrMelvinkennedy1]

Yes