Blower Motor Replacement - Peugeot 307

Removing and replacing the blower motor unit in a Peugeot 307 from years 2001 to 2008. This video demonstrates the process on a right-hand drive vehicle with air conditioning. Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2023
Read important information below:
Disclaimer:
My videos are a guide to making repairs and also to provide helpful information.
Do not attempt to make any repairs unless you’re sure you know what you’re doing. For more detailed information, if something is not clear to you, or you don't understand something, have the repair carried out by a qualified mechanic or at your local car dealer. Any repair you carry out on your car you do at your own risk.
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@tiesblom314]

The fan seems to be the lesser problem. It is the resistor unit BEHIND the fan that overheats melting the plug.

[@tiesblom314]

For some reason , when you have a left hand drive the rotating instructions would be the reverse of the ones given in this instruction

[@user-ge8gx5kn4i]

عالی بود .. آفرین به شما.. تشکر که یاد دادی..❤❤❤

[@screwsnutsandbolts]

Thank you for watching !

[@robertwall3703]

Well done indeed

[@screwsnutsandbolts]

Thank you !

[@thomasl2923]

TOP Danke :)

[@screwsnutsandbolts]

You're welcome !

[@vnnhjhjjkhy6437]

اشكرك على هاذا المعلومه الجيدة

[@screwsnutsandbolts]

You're welcome, thank for watching !

[@Airwolf4545]

А я то такой думаю - "Где педали"))))))))))))))))))))))))))))) На праворукой понятно легче его вынимать, нет вала руля.

[@joanmajoor3392]

much easier then a left hand drive even the removal of the glove box is much easier ( not needed for a left hand drive) since the friction system for the gloove box door panel hinders removal for the left hand drive it is also on the right hand side of the glove box but is stuck in the outer dashboard side panel

[@dellalabdelhamid8233]

Je voulais voire comment changer la résistance qui commande les vitesses du clim

[@ThomasAndAbe]

I cant turn mine... I checked that theres no screw on the top. Do i just use more force? :o Im kinda afraid to use more force. Eventhought it might be faulty.

[@screwsnutsandbolts]

It can be a bit stiff to rotate but if there's no retaining screw it should turn with a bit extra force.

[@ThomasAndAbe]

Hmm Okay, i will try tomorrow again, i just ordered a new resistor for it, will fit that first to see if its only the resistor rather than the fan blower. Thanks for the video and the reply!! :) @@screwsnutsandbolts

[@petrandreas6033]

A proč jsi vyndaval tu přihrádku? Mě to šlo i s ní vyměnit.

[@screwsnutsandbolts]

It's to show people who have never done it before so they can see what they have to do.

[@alaingruffat6595]

J.ais eu une 307 phase 1 a l epoque ! Ces problemes revenaient tres souvent ! Les reparations ne tenaient pas longtemps ! Bref une vraie merde cette voitire ! Je m en suis vite debarasse