Blowing my 350hp Integra 20 minutes after the dyno!!

  Рет қаралды 3,947

ItsaProject

ItsaProject

Күн бұрын

Пікірлер: 56
@brendanwittry6312
@brendanwittry6312 3 жыл бұрын
Just started watching your content. I love the build!
@Itsa_project
@Itsa_project 3 жыл бұрын
I appreciate that man thank you so much!
@darnell1320
@darnell1320 7 ай бұрын
Timing was to hot
@ChoppinV
@ChoppinV 3 жыл бұрын
Super underrated channel
@Itsa_project
@Itsa_project 3 жыл бұрын
Comments like these make my day! I appreciate you!!! 🙌🏽
@AustinNImmanuel
@AustinNImmanuel 3 жыл бұрын
Love ya content brother keep the build up
@Itsa_project
@Itsa_project 3 жыл бұрын
Thank you so much!!!!!!
@Smoove_Q
@Smoove_Q 3 жыл бұрын
Love the content bro and I’m also building a turbo teggy and keep it up the good work and good luck brother 💯
@Itsa_project
@Itsa_project 3 жыл бұрын
Hey thank you that really means a lot man 🙌🏽
@howardnaylor4093
@howardnaylor4093 2 жыл бұрын
The number 3 cylinder valves were clean -blown head gasket-#4 cylinder piston looks like the ring land collapsed from fluid or over-boost the filling in the pan looks like piston and rings
@cesarsalinas5158
@cesarsalinas5158 3 жыл бұрын
Keep your head up brother !
@Itsa_project
@Itsa_project 3 жыл бұрын
It’ll be back don’t worry 🙌🏽 🏎💨
@civicpride1986
@civicpride1986 3 жыл бұрын
Been there and done that, but when that happens it just makes you come back stronger and making more power.. I also had an engine blow the next day after the dyno day and it sucks..
@Itsa_project
@Itsa_project 3 жыл бұрын
Oooph I feel your pain! Yeah I’m trying build the next one to actually last lol
@Jdhcjfbdb
@Jdhcjfbdb 3 жыл бұрын
Maybe should’ve done research before pushing the teggy to 350hp, if the motor is healthy teggy can push 290 whp on stock internals safely and reliably, anything more and you’re risking the motor
@truckerjay8568
@truckerjay8568 3 жыл бұрын
At least the tune is dialed
@Itsa_project
@Itsa_project 3 жыл бұрын
Yeah that’s true but I’m not going stock again 😂
@Kami_kaze808
@Kami_kaze808 3 жыл бұрын
Subscribed to help u all get to the give away
@Itsa_project
@Itsa_project 3 жыл бұрын
Thank you! Really appreciate it.
@Smoove_Q
@Smoove_Q 3 жыл бұрын
With a built motor with pistons and rods and valves and springs and a good cam you should make like over 475 I’m calling it now 💯😁
@Itsa_project
@Itsa_project 3 жыл бұрын
I’m hoping we can hit 500 hp mark 👀😬😂
@AbhiRaj-ch1yl
@AbhiRaj-ch1yl 3 жыл бұрын
Nooooo, it's okay man! It'll be back up running soon
@Itsa_project
@Itsa_project 3 жыл бұрын
That’s the plan 😊
@AbhiRaj-ch1yl
@AbhiRaj-ch1yl 3 жыл бұрын
@@Itsa_project is there any way to make it a reliable build, whether it be a civic hatch or an integra
@Itsa_project
@Itsa_project 3 жыл бұрын
Yeah basically get good actual name brand parts. For example if you fully build you motor you’ll be more then okay as long as you turn it down. Like you can make 500hp and have it turn down to 350 and that should be more then okay to have fun on it all the time. What happened with me was it’s a stock b18c 200k miles and the max that people usually see is 350hp and I hit that max lol. Also usually you don’t wanna pass 10 pounds of boost and I was at 17 pounds. Big thing is tuner too if you have a good tuner you can run more then what is “recommended” if they know what their doing. I think in my case one of my injectors faulted and caused me to hurt my piston.
@Escalofrios29
@Escalofrios29 2 жыл бұрын
That tuner was Ass or the engine was already hurt
@Itsa_project
@Itsa_project 2 жыл бұрын
Wastegate stayed closed over boosted 🥲
@jacobtlaxcala6771
@jacobtlaxcala6771 3 жыл бұрын
Been watching u for a while sad to see the tegi blow up
@Itsa_project
@Itsa_project 3 жыл бұрын
She’ll be back better then ever 🤘🏽
@illstartAfire
@illstartAfire 3 жыл бұрын
Bro you did a number on that engine , glad you are gonna actually build a block
@Itsa_project
@Itsa_project 3 жыл бұрын
yeah im going to start actually tearing it down to see what actually broke.
@illstartAfire
@illstartAfire 3 жыл бұрын
@@Itsa_project lol I just told the wife. I’ve seen 3 turbo cars on KZbin go down this week, plus my boys b20v turbo go down 2 weeks ago , now I don’t wanna go to the dyno lol , stay motivated bro, you’ll definitely build it better
@Itsa_project
@Itsa_project 3 жыл бұрын
Oooph that’s a bummer. And yeah I wasn’t mad because I went in knowing something could happen because I was running 17 pounds 😂😂 but patience is key! Just go over everything and maybe keep it conservative for a bit lol
@illstartAfire
@illstartAfire 3 жыл бұрын
@@Itsa_project holy damn bro frfr 17lbs. From statistics I should be over 300+ just on 8 lbs wastegate , but we’ll see how long it holds , just got intercooler piping to do and figure out what’s the deal with my RC750’s ..
@Itsa_project
@Itsa_project 3 жыл бұрын
Yeah you should be perfectly fine keeping it around 10 pounds and I had 1000cc RC injectors but I needed a resistor box wired into my harness and I didn’t feel like doing that so I bought 1000cc South Bay injectors that are plug and play
@jarodbaty
@jarodbaty 3 жыл бұрын
Makes me not want to go turbo 😞
@Itsa_project
@Itsa_project 3 жыл бұрын
Definitely go turbo if you can! I had so much fun and my motor parts were super old and it was going to happen from the beginning. Trust me if you can go turbo do it.
@katlyndgreen7063
@katlyndgreen7063 3 жыл бұрын
You look so sad 🥺
@dannytorres310
@dannytorres310 3 жыл бұрын
Hey bro what’s up I’m so close to building up my motor right now. If you need an block I have a b18c1 with 115k miles on it. I went full foreged internal on my motor and now I just need some money to buy hondata s3000
@Itsa_project
@Itsa_project 3 жыл бұрын
I appreciate it but I have a new block getting ready to go. But I really hope everything works out for you it should be fun!
@alexrubi9248
@alexrubi9248 3 жыл бұрын
You selling that b18c block?
@jdmDC2ftw
@jdmDC2ftw 3 жыл бұрын
I just watch the turbo series. I enjoyed it. Instead of a giveaway, just get a better camera. It went out of focus way to often.
@Itsa_project
@Itsa_project 3 жыл бұрын
Thank you lol trust me I was planning on getting a new one 😂 thank you for your input helps the channel grow!
@hondaccord2
@hondaccord2 3 жыл бұрын
I would put my money on your injectors bro get those flow tested or get new ones
@Itsa_project
@Itsa_project 3 жыл бұрын
Yeah I’m going to get them flow tested before they go on again. Thanks for the advice!
@amatureskater15
@amatureskater15 3 жыл бұрын
What did you expect?? .....350hp on a mostly stock GSR.....common sense my man... still sad tho. Sure it will be better than ever anything over 300hp. You build the bottom end.
@Itsa_project
@Itsa_project 3 жыл бұрын
I knew it was going blow just not that quick
@amatureskater15
@amatureskater15 3 жыл бұрын
@@Itsa_project well 200k is many a miles. Either way.. great vids and i'll be watching the progress :)
@Itsa_project
@Itsa_project 3 жыл бұрын
Thanks man I really appreciate it, much more to come!
@bigxsuave
@bigxsuave 3 жыл бұрын
Alot of stock b series blocks are making around 350, shit pfi just tuned a giveaway civic with a stock b16 to 342 and it was just fine
@chaseteter
@chaseteter 3 жыл бұрын
350 isn’t crazy on a stock gsr in the least
@macromikey
@macromikey 3 жыл бұрын
yo, are you my dad?
@Itsa_project
@Itsa_project 3 жыл бұрын
😂😂😂 no but I like the name lol
$500 exhaust vs $100 exhaust (Skunk2 Integra)
10:24
ItsaProject
Рет қаралды 69 М.
GIANT Gummy Worm Pt.6 #shorts
00:46
Mr DegrEE
Рет қаралды 13 МЛН
Worst flight ever
00:55
Adam W
Рет қаралды 6 МЛН
The CUTEST flower girl on YouTube (2019-2024)
00:10
Hungry FAM
Рет қаралды 51 МЛН
RUINED parts car JDM H23A bluetop TEARDOWN/diagnoses
16:08
G-Built Productions
Рет қаралды 333
WRAPPING MY CAR WITH AMAZON WRAP!?!
6:52
ItsaProject
Рет қаралды 196 М.
B20V Integra GONE WRONG!! Integra CURSE??
20:00
Back Alley Customs
Рет қаралды 71
$500 lip vs $100 lip (P1 DC2 Lip Install)
8:00
ItsaProject
Рет қаралды 1,3 М.
WRAPPING MY CAR !! (FIRST EVER WRAP JOB) // Vigor Vlogs
16:17
Zak Weeler
Рет қаралды 15 М.
The Junkyard Rescue BUILT MOTOR! Turbo FA5 is ALIVE!
19:58
MashleyBuilt
Рет қаралды 169
GIANT Gummy Worm Pt.6 #shorts
00:46
Mr DegrEE
Рет қаралды 13 МЛН