Installing Valve Springs With Engine In Car / The Old School Way

  Рет қаралды 22,828

BREW2L

BREW2L

Күн бұрын

Пікірлер: 66
@johnmcmullen456
@johnmcmullen456 3 жыл бұрын
I did an in car valve seaĺ and valve spring replacement recently on my stock 1985 Corvette since local shops didn't want the job. Lacking an air compressor, I used the rope in cylinder trick. Not a fun endeavor. I would recommend plugging all oil drain back holes in the heads and surrounding the engine with newspapers to catch any keepers that may go flying when initially breaking free frozen retainers.
@Neomustangs
@Neomustangs 3 жыл бұрын
Just did this on pops car too! Man... i used the twisty hand tool.. took forever!
@stephenroberts7816
@stephenroberts7816 3 жыл бұрын
That is never a fun job but that old school method works perfect every time
@GearHead704
@GearHead704 3 жыл бұрын
Artic Fox still my favorite. Anderson Cam 🔥
@legit4083
@legit4083 3 жыл бұрын
Ahhh you should have filmed everything that’s wat keeps us motivated really wanted to see that cam install you’ve done cam install before, but everything you work on is worth recording bro.
@adamcartwright6220
@adamcartwright6220 3 жыл бұрын
I’m very interested in seeing more. I’m in need of doing my own valve spring and seals. Love any kind of content like this because I’m in the process of trying to freshen my stock 92’ GT up.
@gtfm50
@gtfm50 3 жыл бұрын
Brings back memories. you have so much patience.
@brokentoolgarage
@brokentoolgarage 3 жыл бұрын
Nice to see that work for you in car. Mine was too cruded up and I ended up pulling them - did some porting too while they were out.
@NexGenCarGuys
@NexGenCarGuys 3 жыл бұрын
This is one of my least favorite things to do on any engine.. but this old school method is tried and true. Great Video as always !!!!
@hotrodray6802
@hotrodray6802 3 жыл бұрын
use a rope
@lochnessfox3441
@lochnessfox3441 3 жыл бұрын
I’ve done that job a lot of times and it still sux! Thanks brew.
@hotrodray6802
@hotrodray6802 3 жыл бұрын
check out my rope trick comment
@joeyspates728
@joeyspates728 3 жыл бұрын
I bought my V3 supercharger kit from anderson motorsport. Great guys to work with and they had the best price out there
@jimmyjamesgarage3290
@jimmyjamesgarage3290 3 жыл бұрын
Common Andrew...... we like you, and your cars too bud. It's always nice seeing your foxes on the channel. Also we enjoy you guys joking around. 👍
@FoxcastMedia
@FoxcastMedia 3 жыл бұрын
TIME CONSUMING!! Lol that's a long job, but worthwhile for sure on a high mile engine, or one thats getting a cam! Great video bud!
@paulhudgins5120
@paulhudgins5120 3 жыл бұрын
Hey some of the old school tools really work great, if it works it works. Always like the videos when your changing heads,valve springs,cam, and that always the best stuff.
@kimcokevin
@kimcokevin 3 жыл бұрын
Does Anderson sell headlights?
@thefoxchamber
@thefoxchamber 3 жыл бұрын
This is the video we need, bro.
@mji387
@mji387 3 жыл бұрын
Seems like all the Anderson cams sound good👍
@Messergebnis-liebhaber
@Messergebnis-liebhaber 10 күн бұрын
I wonder how Americans can afford owning such big garages full of tools! Is life really that cheap and affordable in the US? KZbin is full of people like this one! It is my dream only to have a place to change my oil!
@LifeofMarcosR
@LifeofMarcosR Жыл бұрын
Thank you guys love the channel Where did you get the sleeve that protected the valve seal from getting damaged? Did it come with the seals? Thank you Keep doing what your doing Also do you add the air to each cylinder as you go? I was confused as to why the other cylinders valves moved when you put air to the other cylinder… Or can you just leave the air in the one plug hole and that will be suffice for the rest of the project?
@BREW2LFOXBODY
@BREW2LFOXBODY Жыл бұрын
The sleeve came in the kit. I pumped each cylinder up individually, the pressure from the air rotates the engine some. Thanks for the kind words!
@ShizzzzBox
@ShizzzzBox 3 жыл бұрын
Yessss I have to do valve springs in mine!!
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
Nice! Hope this helps
@CharlesLease-ei1ee
@CharlesLease-ei1ee Жыл бұрын
Talk about those school and these guys should know this the old 390 mushroom Val seals. That’s the best ones to use leaking valve seals where put those on it you’re good to go 390 mushroom Val seals.
@Raisen476
@Raisen476 3 жыл бұрын
Awesome video Brew! I'm getting ready to do this exact same modification on my Cobra. Thanks for the tips. Can't wait to hear the Arctic fox with the lumpy idle.
@wadestewart901
@wadestewart901 3 жыл бұрын
Saw the Gram! Sounds 👍
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
I’m definitely impressed! 👌
@Backfire10
@Backfire10 Жыл бұрын
Hey Man, you ever run any of the beehive valve springs? I wanted to know your opinion/assessment of the beehive spirngs?
@chrisdolt7300
@chrisdolt7300 Жыл бұрын
Is it a bad idea to use the stock retainers and keepers?
@MustangGuy6501
@MustangGuy6501 3 жыл бұрын
Yes but I love the funny side of the channel to you and Andrew are funny too
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
I wish he would video more 😂
@MustangGuy6501
@MustangGuy6501 3 жыл бұрын
@@BREW2LFOXBODY me too
@irshred
@irshred 3 жыл бұрын
Cool old Skool method. Did u make the tool for compressing springs?
@JKennedySVT
@JKennedySVT 3 жыл бұрын
Ive done this job. It sucked. Lol. But good piece of mind when upgrading the cam and opportunity to replace the seals.
@whitefoxpaul199
@whitefoxpaul199 3 жыл бұрын
Nice. Can't wait to hear it.
@pimpovic2
@pimpovic2 3 жыл бұрын
I'm still early in the video, but have a question about the cam choice that maybe you'll answer in the video. The B-21 cam is the 1.7 roller rocker version of the B-31 cam, which is a supercharger cam. I could do the math to see where it puts the lift and specs of the cam, but it should essentially be .030 less than advertised, which then should be about .060 less than the B-31 which I do have specs on. You're gonna make me do the math, to see how it compares to the other cams you mentioned. Interesting approach. Curious to see how it plays out.
@johnsampson7791
@johnsampson7791 2 жыл бұрын
What other tool would you recommend for compressing the springs? about to do this myself
@podnabuilds
@podnabuilds 3 жыл бұрын
Great video. Definitely gonna use this for reference when I change mine Tks brother 👍
@bobsmith-st9lq
@bobsmith-st9lq 3 жыл бұрын
Never would go with a anderson if you dont get a cam card. How would you degree it?
@BREW2LFOXBODY
@BREW2LFOXBODY 3 жыл бұрын
It comes with a cam card.
@carlosnsosa99
@carlosnsosa99 3 жыл бұрын
How about a set of headlights for Andrews car
@hotrodray6802
@hotrodray6802 3 жыл бұрын
🔔😎 OLD SCHOOL RACER TRICK Pull the plugs Roll the chosen cylinder to TDC compression. Roll piston down either way. Feed in 2-3 ft of 1/4 inch cotton rope through the spark plug hole. Roll the piston up. Change springs. If you cant figger out the rest from here, call 911.😁😁
@scottpage1180
@scottpage1180 3 жыл бұрын
Hey Brew2L , I was curious, will the B-21 cam work in an AOD car ?
@89gtsmoke
@89gtsmoke Жыл бұрын
We're these stock E7TE cylinder heads?
@CharlesLease-ei1ee
@CharlesLease-ei1ee Жыл бұрын
Bring your pissing up to the top because if you lose air pressure guess what happens pulling ahead
@Daniel-yb3hn
@Daniel-yb3hn 3 жыл бұрын
Man how bad I want a Anderson cam California sucks with all the regulations
@PowderedPlates
@PowderedPlates Жыл бұрын
I need help doing mine
@Stangnotch03
@Stangnotch03 3 жыл бұрын
How does it compare to the n41?
@ShaneHerald
@ShaneHerald 3 жыл бұрын
you dont have to really put anything in the cylinders ive changed many springs just buy putting the cylinder im working over at TDC and the valve can only drop a inch or less and it does not drop hard enough to hurt anything .......
@mr.oklahoma9288
@mr.oklahoma9288 3 жыл бұрын
Good to know! Thanks for dropping that info.
@hotrodray6802
@hotrodray6802 3 жыл бұрын
if the piston is 3 inches doen youll lose the valve stem. read the rope trick comment.
@ShaneHerald
@ShaneHerald 3 жыл бұрын
@@hotrodray6802 when a piston is up on tdc you dont have three inches....read a tape measure
@2valvegt673
@2valvegt673 3 жыл бұрын
I use the same tool and method
@lamarrichardson1782
@lamarrichardson1782 3 жыл бұрын
Hell Yeah!!!
@mr.oklahoma9288
@mr.oklahoma9288 3 жыл бұрын
Please anyone chime in here...... If my plan was to swap an auto (tranny) to a standard, what needs to be added to my list below? Manual transmission. Shifter and supporting pieces. A hole cut through Car where shifter will go. Anything else?
@travisszabo517
@travisszabo517 3 жыл бұрын
Interesting.
@jerrodminton1736
@jerrodminton1736 3 жыл бұрын
Its easy to be difference dont ls swap it or coyote swap it
@mikepapillo5728
@mikepapillo5728 11 ай бұрын
HEY BUD YOU YOU FORGOT THE MOST IMPORTANT FACTOR ,,,,,, MAKE SURE YOUR ON TDC ON THE COMPRESION STROKE
@denismarinos4784
@denismarinos4784 8 ай бұрын
He mentioned that at 5:26
@cesar101387
@cesar101387 3 жыл бұрын
I just recently did that with that same spring kit. Made a video on it. kzbin.info/www/bejne/fKjQaIOcd692mLc I also used that crows foot tool. My procedure was a little different though I didn’t use the air compressor tool to hold the valve up. I’m doing the an anderson N41 cam this week end. Gonna make an updated video on it as well. That is a very tedious job. I think the hardest part was trying to catch the videos but I’m by my self and it’s not easy having to need 4 hands 😂
How to Replace Valve Springs With Heads On - Rebuild the 289 Ford - Part 13
10:46
How to change valve springs with the heads on.
17:33
Squarebody Stuff
Рет қаралды 57 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 29 МЛН
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 61 МЛН
How To Install New Valve Springs in Your LS Engine
30:31
Lowbuck LS
Рет қаралды 68 М.
Back To Basics: Spring Swap
5:45
COMP Cams
Рет қаралды 113 М.
QUICKLY find FOXBODY issues using this simple approach
12:41
How To Remove Valve Springs In The Car -EricTheCarGuy
9:19
EricTheCarGuy
Рет қаралды 211 М.
The CAR WIZARD shares 10 Crazy Easy and Essential Mechanic Tips
26:13
Car Wizard
Рет қаралды 3,3 МЛН
A DETAILED overview of KNOCK and PRE-IGNITION - BOOST SCHOOL #7
16:14
driving 4 answers
Рет қаралды 641 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 29 МЛН