Blue Star Air Conditioner Remote Control Operation ❄ All Function covered Step by Step ❄

[@mounikamouni7224]

It's very helpful sir ,thank you but it's very fast explanation , once confused easily when we hear double times understand easily . So I have to request u pls explain this video in slow & clear explaination ...

[@Wearetheblinks]

Thank you so much sir for uploading this video 📸

[@raghuramjanamanchi9893]

It became very very useful to us... Thank you very much...

[@lovepreet666]

*_You are most welcome_*

[@nayanyadav6919]

@@lovepreet666 I'm unable to change the temperate by using my remote. Every other button like power on/off, fan, mode etc. is working fine but nothing happens when I tried to change the temperature by pressing the + and - buttons on the remote. Can you please help??

[@bimaldash1741]

nice video Sir. But I have a question. My bluestar AC is not connected to inverter....and when power goes off it automatically switches off. Does it have any bad impact on my appliance ?

[@sanjuktasahoo6873]

If you have a stabilizer it doesn't have any bad effect

[@nayanyadav6919]

I'm unable to change the temperate by using my remote. Every other button like power on/off, fan, mode etc. is working fine but nothing happens when I tried to change the temperature by pressing the + and - buttons on the remote. Can you please help??

[@icantevenpretend]

​@@nayanyadav6919 Did you get this fixed?

[@logu5347]

thank you u, also worst ac remote controller ever made

[@mallikamiranda8756]

Yes it's the worst REMOTE control ever made

[@saikumar-kn8dd]

Good information 👌👌

[@sdemktgsikar2869]

Remote buttons are not working while the cell is ok.

[@josephsamuel7044]

Really good information. Detail and clear. Thanks bhya.

[@KALYANUSHA36]

How to move vertical rod manualy which mentioned in UserManual to set the airflow directions

[@daciagamer2025]

It's very helpful brother nyce work 🙏🏻🙏🏻

[@nayanpatel820]

Thank you 😊

[@arupmanna9272]

Found this very helpful

[@lovepreet666]

Glad it helped

[@dibakarpathak7483]

Thanks a lot sir 🙏

[@desi_anarch]

Thank you paji. Works in 2024 model also

[@MrBALE82]

Hi, really good information thanks for this video. I had a query about how to set auto climate..so that it automatically increases or decreases according to the temperature.

[@sandipyelmule3899]

😊

[@nayanyadav6919]

I'm unable to change the temperate by using my remote. Every other button like power on/off, fan, mode etc. is working fine but nothing happens when I tried to change the temperature by pressing the + and - buttons on the remote. Can you please help??

[@viswagopalan3596]

Thank you so much sir it's really useful thanks a lot ❤

[@parthshah0102]

This is smart ready ac ..... So how to connect with the wifi using a mobile application ?

[@lovepreet666]

This is not a smart AC.

[@sudheervv1063]

Very good explanation 👌👌

[@nayanpatel820]

Good content sir, thank you, but i have one question, i have bluestar 1.5 inverter AC at home, 5-6 hours daily uses, but lightbill unit is more high than my neighbour's split AC, there's any problem in my inverter AC?

[@shankariramesh2906]

Thank you useful one

[@ASMR_survey]

Thanks this vedio is very helpful for me

[@lovepreet666]

Most welcome 😊

[@Jassi2121]

Is any auto clean(mode) option available?

[@lovepreet666]

NO

[@PS-te6zn]

My bluestar remote got stuck after some time usually when unattended for 5 min or so and I can't operate it whenever there is a timer like symbol in lower right corner...what can I do....can u suggest some solution

[@harindersingh-sc2wb]

Same issue I face

[@rajsahu135]

same issue facing....change the cell

[@Madhumitha-pc1yl]

Same issue

[@tamizhtamizh2154]

Thank u so much

[@vinayakdalbanjan2052]

Thank you so Much

[@maheshvenigalla6513]

Which is the most preferable mode for cooling for whole night??

[@ottbuzzreviews]

Lg is good cooling very silent

[@enthusiast9998]

@@ottbuzzreviews ye bro i have both blue star and lg ac, lg is very silent

[@venkataramana1558]

The symbol which is above the temp symbol on the display of bluestar smart ac p series remote.. can you say what it indicates. Its like + symbol..

[@yogisuhas4588]

Tq

[@NitinJaine]

What is the function of "Fix &Lock" button in New Blue Star Remote in 3 star split AC?

[@chintapentaR]

Same question, I got the AC today and wondering how to use this button.

[@lovepreet666]

*Fix & Lock* is a 4 - in -1 convertible mode function. Press once AC runs at 1.5 Ton Press the second time AC runs at 1.2 Ton Press third time AC runs at 1.0 Ton Press fourth time AC runs at 0.8 Ton

[@ManojKumar-gh8sf]

In these situations internal unit par display mein kaya aayega

[@shadabsayed2294]

Convertible function in 3 star 1ton blue star ac is possible... In remote fix and lock button is available... I press fix and lock.. It's show cc.. But after few seconds it comes again in normal... Plz... Reply

[@deepakdogra7]

How to disable the beep sound while operating the remote functions?

[@aryanjawalkar07]

I don't think we can disable it

[@ramchandrasarkar3698]

Thank you sir, but one doubt, when ever it goes lock unfortunately how it will be unlocked? Please tell me. Thank you.

[@somyabathla]

When you get to know, please share the information

[@kavitasupe614]

Best video 🎉

[@anilkashapogu8382]

Nice video, good

[@AMALKANTICHOWDHURY-w4f]

Sir When I start AC shown 28 digree not change less or high tempature. What can I do? Please suggest

[@orca-c4z]

This happened to me this same morning…Click on “Mode” button on the left side of the remote…you’ll see the temperature in the remote…. After this you can control the temperature using the + and - button

[@nothingnew4]

Screen backlight avail or not?

[@servantofchrist2113]

How to lock the remote ( Child Lock )

[@twochillies6416]

In my blue star ac displaying AC, what does it mean?

[@mahendrannair6886]

In this a/c it will off after reaching desired temperature

[@meenakshigupta429]

Sleep mode k baare me thoda detail me batayege plz

[@kent7.bts7army]

Is that possible to swing left and right..?

[@lovepreet666]

NO but we can adjust it manually.

[@kent7.bts7army]

@@lovepreet666 Thank you bro...

[@ravithothathri5778]

If we use Turbo option frequently is any chance to get Gas leakage comes in future...

[@lovepreet666]

*NO*

[@merchantboy]

My remote doesn't go below 20 degrees. Is this normal?

[@Allthing77]

Thank

[@hembaraasongs4142]

What to do for cooling the room ,please tell me the settings ?

[@tinababy3619]

How to lower the brightness of the temperature display part?

[@PraveenGurbani]

Timer off button doesn’t showing any led light or notification on indoor unit??

[@shamshadkhan2200]

Is any ac control app for blue star ??

[@CirkaFitness]

Can't change temperature using up-down button. What to do?

[@-Raaj-jb1pg]

Press clock button one time then try

[@raghuramjanamanchi9893]

Go to mode button.press it to Auto mode.Then if you press + or - buttons, you will go to your desired temperature...! That's all..!!

[@sagarmore8367]

@@-Raaj-jb1pg thanks bhai ❤️

[@nehapareek1025]

@@-Raaj-jb1pg thanks a million

[@DineshKumar-oy2qt]

@@-Raaj-jb1pg thanks bro

[@BVNJayakiruthikaM]

If light button is pressed will the ac is functioning or turned off

[@lovepreet666]

Pressing the light button will turn off the LED display of the indoor unit and AC will remain functioning

[@BVNJayakiruthikaM]

@@lovepreet666 thank you so much🙂

[@vverma1973]

Does the remote have back light for use in dark?

[@vverma1973]

@@lovepreet666 looking at video it seems as if the remote display is backlit 🤔

[@lovepreet666]

Yes, it has a backlight

[@realismpoetry3062]

Very helpful

[@swatipanigrahi3120]

I have also bluestar AC, 3 star ,Inverter AC, but it shows the temp 24 only,i cant change its temperature to 20,18,or 16... its always 24 even in auto mode. Pls help

[@debashispaul3945]

Same prob..can someone suggest pls..

[@Vsaik]

same problem. The service team is also not attending to solve the issue

[@raghuramjanamanchi9893]

Press the clock button,then press + or - button..! It will work..

[@jitendradarwade5935]

C My remote is working fine except its temp increase + and temperature lower buttons are not working. AC works at 24 deg only. Is there any lock that has been activated ? Can this be unlocked ? AC is new and installed 2 days ago.

[@lovepreet666]

Press clock button once and then try.

[@rachnasahni9419]

Thank you ​@@lovepreet666

[@pfservices5783]

Is there any option to control from the phone...is there any application

[@lovepreet666]

Not available for this model

[@shivakrishnakamarapu4890]

I have downloaded bluestar ac wifi. Application and unable to configured in application for mobile operate . Kindly let me know if we can configure and use the AC through application

[@kamalkrishnaroy7098]

What to do when temp up down button not working

[@kotagiripavan-mb8de]

How to set horizontal swing bro

[@poojakaushik5657]

Iam searching for remote lock amd unlock function which is not available in your videos .. there is no use if you didnt tell how to lock and unlock the ac remote

[@SurajitSarkar19]

It is not for locking and unlocking your remote. Using this button you can set your AC to operate at different capacity. For example you can make a 1.5 ton Ac to work as 0.8T, 1T, 1.2T and 1.5T mode. Refer your ac manual for more info about it.

[@rajansahu8922]

Automatic lock ho jata hain

[@indreetsingh8667]

Bro saade kol v same ac aa but inverter vala And remote v same hai Ehde vich AC wifi kive on krde aa??

[@nayanyadav6919]

I'm unable to change the temperate by using my remote. Every other button like power on/off, fan, mode etc. is working fine but nothing happens when I tried to change the temperature by pressing the + and - buttons on the remote. Can you please help??

[@lovepreet666]

Press *Time* button once and then try.

[@jaysh519]

Any idea how to set a quick 1 hour timer like in LG ac?

[@lovepreet666]

Not possible in this AC.

[@aayankotwal791]

MAN WONDER FULL

[@karljeffries8611]

What should I do to stop the DH mode in 1.5 ton Blue star AC

[@arponneogi6323]

Sir how to check room temperature in blue star ac ? 2023 model MNU model

[@sohamsapkale4090]

My remote doesn't have temperature button instead it have fix and lock

[@harikrishnan1109]

Yes what does fix and lock button do?

[@anil1786]

Time is constantly blinking, and unable to control the temperature. Any thoughts?

[@lovepreet666]

Press Clock Button Once and then try.

[@anil1786]

@@lovepreet666 I did that before but seems not to work. What I feel strange is that the continuous blink stopped after a while. I have no idea what happened, and how it stopped, but things are as expected from the remote. Thank you for your reply.

[@shivajighodke8401]

थँक्यू

[@lovepreet666]

🙏

[@vikas_art-craft_studio]

Can someone help me when I on my ac so CC is shown on my ac

[@itsmywindow]

Useful

[@lovepreet666]

*_Thanks_*

[@kprokz]

My timmer off function is automatically set to 1:00 AM now I'm using my ac in day time. How can i change timmer off mode from AM to PM?

[@vipinsharma2964]

In which mode energy can be saved as there is no energy saving or save energy mode

[@sunidhibajaj8500]

Sir fix and lock button is not showing anything when I press...Then I am unable to understand on which tone my AC is working __1ton/1.5/0.8...pls guide

[@preetikhatri8113]

Sir how to unlock the remote... It doesn't work...

[@premilluri8909]

Sir how to set auto climate..so that it automatically increases or decreases according to the temperature

[@icadowner3287]

Brother there is no heat mode available in blue star 1.5ton 5 star AC.

[@laxmandasari6093]

when i turn off in remote, outdoor unit is still running.....wt may be the prblm??

[@sakshi9636]

If i want to convert the heat mode in winters then where to change ??

[@lovepreet666]

Not Possible in this Model.

[@suganthkumar7807]

Horizontal button in my remote but indoor unit not working horizontal swip then y

[@SAkash-fc3bv]

How to on the AC

[@SuryaaSr]

Hi sir and everyone.. I do have bluestar inverter ac.. The previous swing position is not retained after restart..each time i have to do it manually. . Any solution for this?

[@rahulchoudhury3957]

It gets reset everytime AC is switched on, default setting.

[@zameenaasmaan6039]

You haven't covered when and why 'L3' mode displays?

[@dipankarpalit2363]

Sar mera bluster ac kay remot may light nahi jalta hay ap jo ac ko lay kar vidio banaye hay ohi ac hay may kya dusra remot use. Kar sakta hu

[@Creativesatti]

How to set time the timer is gatting bilk and is not gatting set

[@nirmaldassbanger3241]

My blue star ac 1.5 tonne capacity 5 in 1 inverter acc how we can set it to 1 tonne or low to save electicity

[@gadadharsatapathy7821]

How can I use fix and lock button?

[@sreenuvasu574]

My remote got hanged. I'm not able to do anything. Please help

[@adhinarainan1868]

How to make room cooling wat mode is used

[@BadriNichenametla]

Cannot change the temperature even in auto mode. What is the solution?

[@lovepreet666]

Press clock button and then try.

[@shankarvaigankar8116]

Eco button set temperature automatically to 24 degree. can I change it and set at 26 degree.

[@karuppannansellapan6231]

Bro how to unlock inverter ac remote bro please tell me

[@harikrishnan1109]

What is fix and lock a new function instead of temp u will get sub help!

[@prasadiyer3977]

Sir please tell me how to remove clock from the remote

[@SuhasKarvande]

in first mode the compressor does not stop.. and the outside fan and compressor always run and wont stop. As when the room temperature reach to desired temperature..with the help oh thermostat the outside unit should be stop..and again when the room temperature increases then it should start again. So this should happen.. but in this model Rnu512 inverter AC seems this functionality is not there. Suhas karvande, Pune.

[@lovepreet666]

Inverter AC didn't work on this principle.

[@buildyourcountry]

03:00

[@raytolly1524]

no matter how high i turn this as, it cant heat up the room.

[@maheswar8828]

In My Blue star Ac remote the time is blinking whereas I couldn't change the temparature, I cant set the timings & Temparature though, only ON/OFF is getting operated. Kindly suggest me on this.

[@preethi611]

U shud click the clock button again to stop that time blink and u can set the temperature

[@CayenneGT]

​@@preethi611 even after clicking the clock button and then after that when i try to operate other buttons, the whole display flashes once and clock again shoes 12:00 pm, I'm not able to use the remote control. Could you suggest what to do?

[@Madhumitha-pc1yl]

🤐😥everyone is facing the same issue .... For me even after setting the right time meanwhile I changed the cells too... Nothing worked

[@sandhiyaparthiban6847]

I can't operate + & -- button.. ac is in cool mode.. except + & -- buttons all the other buttons are working.. this new bluestar inverter ac.. please give me a solution

[@joshajay]

You have entered time change mode. Exit that and you will be able to operate other functions

[@gowthamns1904]

How to set the automatic off time?

[@Anime-physique]

How to set 1hr on and off automatic mode?

[@saurabhsaini3374]

Does it not have horizontal swing option?

[@lovepreet666]

horizontal swing has to be adjusted manually

[@AldosMusic]

@@lovepreet666 manually means?