Sanlida Dragon X9 Compound Hunting Bow Tune Up and Test Shoot

[@dutchdryfly]

There is a line on the cam which will correspond to the numbers. So you put the bolt in 3 but it actually corresponds with the chart on 5 @7:07

[@chrisc5726]

Thanks. Very well explained and outstanding video. Best out there for sure.

[@RickyD1968]

Awesome video !!!

[@chrisc5726]

I hear the arrows that come with this and other Sanlida bows are not good. What weight are those arrows you’re shooting?

[@bluecollaroutdoors5556]

They are cut down to 27 1/2 inches and weigh around 400 grains

[@l.i.archer5379]

It's also slightly nock low.

[@kylebowman4161]

I just bought one going to be sighting it in Saturday do I go top pin at 10 yards then 20 30 and then last one 40?

[@roosterrc6519]

Something that works is set 1 pin dead on at 25 yards it will be a little high on any shot below 25 yards and a little low at 35yards this way only 1 pin is needed and take the guess work out of witch pin to use .iv done this for 35 years and improved my shooting 100 percent,add a second pin set dead on at 50 and that pin with work from 35to50 , practice and learn your bow and you can make longer shoots by just holding high ,say the target is 65 yards hold the pin at the top of its back the arrow drop into the perfect kill zone .hope you can understand all this .good luck

[@SpoonCH22]

Great insight. Although I still feel like american made is better but I am very surprised how sanlida performs in comparison. I wish their dragon 10 was affordable for me to try it as well. But the dragon 8 and 9 and extremely good beginner bows.

[@JBs_trucks_and_whitetail_bucks]

From my research Limbs and strings are made in in the USA and it is assembled in china

[@bojack2740]

$600 is very affordable compared to $1,300 + you'll be paying for "American made" one that won't be that much different

[@robertmiller172]

Hi, I've been watching your Sanlida videos. I am a 44 year old beginner bow shooter on a budget. Looking to upgrade the bows accessories on a budget in the future. I just bout a Sanlida dragon x9 this last saturday. I wasn't willing to get the 10 for my 1st bow yet. My question is, can i use Sanlida Dragon 10 sight and fall away rest on my Dragon X9? Also, the X9 uses D97 serving. Can i replace that with BCY 452X?

[@donaldbuckner2935]

Since you have not yet gotten a reply, I will tell you that yes you can use 452X they are the same material different diameters. A fall away rest is better than what the bow comes with.