Blueghozt V2: The Ultimate Flow Series Controller Tutorial

🔥 *Unlock The Full Potential of Your Automotive Lighting with the New BlueGhozt Controller! 🔥*
Welcome to another electrifying episode where we take your automotive lighting game to the next level! In today's video, we'll be dissecting the much-anticipated new version of the BlueGhozt controller by Ghozt Lighting.
⚠️ **Legal Disclaimer**: Always know and adhere to your local laws concerning vehicle lighting. Remember, the show modes on these controllers are designed for stationary vehicles only. Park your car before you put on the light show!
👀 *What You'll Learn:*
Unveiling the features of the new BlueGhozt Controller
A step-by-step guide on app setup
Compatibility with various lighting setups
Real-world performance tests
Safety and legal considerations
🔗 *Support the Channel and Get Your Gear Here:*
Next Level Neo: www.nextlevelneo.com
Amazon Shop: www.amazon.com/shop/bragginlightz
👍 If this video brings value to you, please give it a thumbs-up, share it with your friends, and hit that subscribe button for more high-voltage content!
🔔 *Ring that notification bell* so you never miss an update from us!
#BlueGhoztV2
#ColorFlowController
#BlueGhoztTutorial
#ColorFlow
#LightingControl
#RGBControl
#TechTutorial
#HowToGuide
#CarLighting
#AutomotiveTech
#ControllerSetup
#LEDControl
#CustomLighting
#DIYTech
#LearnBlueGhozt

[@oscarayala7354]

I appreciate this video. This was amazing in explaining everything

[@oscarayala7354]

I was also wondering what the button add to home does. In the switches page. Thanks

[@NextLevelNeo]

Glad it was helpful!

[@HAMMER_2.2]

I dont have a Blueghozt to test on at the moment, so could you please tell me if any of the triggers will override the turn signal inputs? Or do the turn signal inputs have the highest priority?

[@smittysav]

Appreciate this! Was somewhat knowledgable about the Ghost from my old Lexus when I had someone else do my DRLs but going to attempt some tail lights for my new car so this was very helpful as far as the Matrix portion goes as well as the reverse light option. Thanks a bunch

[@boostedsamuari7436]

Can say I run a show mode while my car is on/while driving ? Or does the parking light/drl over overpowers that signal

[@carlosluna4968]

This video is so awesome!!! Very very informative!!

[@NextLevelNeo]

thanks. Hopefully it didnt get to technical. there was so much i wanted to cover. I tried to start that tutorial 3 times on different lights. I think ill do one on a set of tails at some point since the 5mm grid programing is a bit different.

[@carlosluna4968]

@@NextLevelNeo it made me realize how much more this controller had to offer! Was crazy at how well you explained it tho. Best by far!!

[@jammiegill9190]

I have a 2020 charger with blue ghost I like to keep my drls 2 different colors any way in the app to keep them on when car isn’t running I have the drls on a switch

[@xoarx]

are the strips/halo/demon eye wired in parallel or series? and is that just a 2 output controller powering all of the different leds?

[@NextLevelNeo]

They are in series and it is just 1 ghozt controlling everything.

[@HAMMER_2.2]

Just curious, what is DRL 2 (parking light 1 & 2) originally intended for? I just cant understand what secnario they might have intended it being used for originally .

[@NextLevelNeo]

It let's you set some sections as a 2nd color when drls are activated. I use it to make addressable demon eyes red and the rest of the light white, when drl is on.

[@maxstuckert]

Bought some tail lights that came wired with a blueghozt 2.0 that I hooked up to my battery. I want to wire them to a switch through that external input. Is it just power wire from external input to switch then power wire from switch to battery? Don’t have the most experience wiring but I want to be able to toggle a show mode without having to open the app every time.

[@NextLevelNeo]

That's pretty much it. The ghozt just needs a 12v input to turn shows on. A switch inline makes it easy to turn on and off.

[@eazygfx4815]

How did you enable the brake? In app or hardwired? I have no wires going into my ghozt and i don’t want to open it up 😅 thanks

[@NextLevelNeo]

You will have to run the wires. Unfortunately the blueghozt can't connect to your car wirelessly.

[@eazygfx4815]

@@NextLevelNeo alright i’ll have to wire a break wire then, i only wired everything apart from reverse and brake so no other option

[@eazygfx4815]

@@NextLevelNeotoo bad both brake and reverse have priority over show modes, tried hardwiring it to the 12v so it’s constant on but then it stay lit up with the DLR and everything off 😅

[@patrickp341]

If im wanting to use a auxiliary source to trigger my drl, say like a switched ignition source, but would like for my leds to play an animation when locking/unlocking car, by tapping into the parking light, should I tap the drl input into the brake input? I originally was gonna tap the parking light into the party mode, but from watching this video im assuming, party mode will just loop indefinitely, so that wouldn't be good for a quick animation for locking/unlocking. also, will signal over ride brake? for switch back, or is brake over riding everything?

[@HAMMER_2.2]

Hey if you haven't found a solution to this yet, I'm kind of doing a similar situation to you. I wanted my alarm to play a cool animation when armed/disarmed (something other than the turn signal animations). What I designed was taking a signal from my lock and unlock wires( one wire from each, and diode isolating them to prevent cross signals) then send them both to a timer relay. The timer relay can be set for as long as it takes to complete one full show mode loop. Then send that delayed off 12v signal to the ext input and pick a showmode appealing to you. (For example, I'm gonna pick Line Dance). Now whenever I arm or Disarm my alarm it would play a single loop of Line Dance. This was my only workaround to getting a startup/Shutdown animation that's seperate from the parking light startup animation. I wish they would add the startup/Shutdown animation to Blueghozt, like is available on their Ghozt V5 Sequencer. If they did, you could use a Hella latching Relay and have a - Disarm signal Set the relay and - Arm signal Reset the Relay. 12v whenever your car is disarmed/unlocked. Just an idea for you !!

[@shastrimaharaj1846]

Are there any other brand of module can be used to give the same function

[@NextLevelNeo]

We sell a controller that has drivers that add a drl startup and sequential turns but they are set. Blueghozt is the only controller with anywhere near this level of control.

[@FantasyGhost]

Can you use the same 5mm led lights for DRL and brake light, or you can only define it as one or the other?

[@NextLevelNeo]

They are defined by the section so you could split the 5mm so some are brake and some are drl color. The triggers have a hierarchy system so some inputs overpower others. If you have drl and brake on for a section the section will show the brake color.

[@MrSamgoingsiii]

Cam you make a video on motorcycle lights zx14 Gen 1

[@cheex9861]

Is there a way to just reset all the settings back to factory?

[@NextLevelNeo]

Only if you backup the original settings in the block tab by clicking backup config data.

[@josesandoval8519]

This is lite 2.0?

[@eghatchtech92]

What is the legacy option?

[@NextLevelNeo]

Totally forgot that. Fast mode was added to increase the led count limit of 260rgbw and 325rgb per channel. Fast mode takes it to 350rgbw and 425rgb. Unfortunately not all leds are compatible with fast mode so an option for legacy mode was added and set as the default. Only use fast mode if you need the extra addresses and if you are experiencing leds flickering or acting strange, switch back to legacy mode to test with.

[@MrSamgoingsiii]

Hey bro thanks for these tutorials I have my set coming by sinister retrowerkz got my sub thx