BMD Studio 4K cameras & ATEM Mini - Tally, SDI and Colour // Show and Tell Ep.86

[@enregistreur]

Wow wow wow... WOW ! I didn't know the PGM input on the Pro camera could still be used, when paired with an Atem Mini and a bidirectional converter. This is AWESOME! Thanks for the video, very useful!

[@heretorecord]

Yes I had a theory and was very happy to see it worked! I have not tried multiple cameras yet with some sort of splitter so I’d be keen to see how that goes

[@isidoromaich7226]

The information here is very correct, I had the opportunity to try it now that I am renting a couple of BM studio cameras, thanks for the tips

[@heretorecord]

Glad it was helpful! and glad you had a play with the cameras yourself!

[@freddymiguelponce]

John. As always. FANTASTIC! Have a Productive and Healthy Day!

[@wasbeen]

I just want someone to release a good affordable m43 power zoom lens, the I’m “all in”

[@PeterVCook]

Exactly. I need at least 300mm, ideally 400mm for my use case.

[@heretorecord]

Yes it feels like we are overdue a couple more lenses

[@zenissart]

it just doesn't exist. I can't understand this choice of micro 4/3 lenses for BMD...

[@mtsteuerung6916]

Great video John .. great Cameras as well .. I think BMD should build a PTZ Camera and add the controls into the Atem also into the ATEM 1 M/E Advanced Panel ..

[@heretorecord]

Oh I would love that

[@jwlighting]

Just get a bmpcc, DJI RS2 and a middle things apc-r, and you'll have exactly this!

[@willstewart9728]

Super helpful! Answered the questions I needed. Thank you!

[@heretorecord]

Glad to hear it!

[@TommyReynolds89]

here waiting for a tutorial about talkback :) Thanks John

[@heretorecord]

I was hoping to see a new ATEM by now with SDI but I may just take out my TVS HD and make a video with that!

[@00RedRanger00]

Can you still send signal of the Tally when using the Hollyland 300 pro instead of direct HDMI?

[@Lindhagaa]

Fantastic!

[@heretorecord]

Thanks!

[@GoonsProductionUK]

Hi, just wondering if knows if the 4K Plus (version with only HDMI) will allow a SDI-based switcher like the ATEM TV studio pro 4k control the camera via a 12g bi-direc convertor? So in this case I wasnt to run a 4k Plus that will be fed into a Bi-Direc 12g SDI convertor, with an SDI feed going into the switcher. An SDI feed out from the switcher will then be connected into the convertor's SDI input. Am I being silly or would that work in theory?

[@MicahBrownMedia]

Thanks for the tip! I am running my first show with the pro studio cameras next week! One question though, is it possible to have camera control with this method when using multiple cameras? That's the kicker. Since you only have one output on the atem (two of your using the extreme) I imagine that you can't just use an HDMI splitter as EDID would probably get in the way. However, I would be curious to just see what happens.

[@mt1990sweg]

Can you use camera control over sdi with an atem sdi switcher? Or would you need to use the sdi in on the camera for that?

[@sufikhal]

hello! can the black magic 4k studio record 4k with the atem mini pro iso? on google it says it cannot handle 4k quality video. im confused, does that mean i have to record on the individual bm 4k studio cameras on ssd? instead of recording on the atem mini pro iso?

[@TakaIguchi]

If I went sdi directly into the atem television HD, would tally work?

[@heretorecord]

You know what I have not cracked out my old TVS to find out but I would imagine it would work just as expected.

[@doveshouse]

Is it possible to connect studio cameras solely by Ethernet to your 10Gb LAN router/switch and use the ATEM in that way (with no other connections)????

[@jasonharris7976]

Can you set your color for the studio camera and then save that so that the item boots with that setting every time? I have tried with no success so far.

[@LifeofGodChurch]

Thanks for this awesome content. We subscribed! We have BM Studio 4k Cameras and recently got the Atem Extreme. However, I never see the green light on the keyboard - we only see the Red light. Is there something we are doing wrong?

[@heretorecord]

You are not doing anything wrong. There are two modes of operation on the ATEM. Preview/Program a shown in my video, and the cut mode which you are using. In my case I can preview any shot before putting it live. This setting can be changed in the “ATEM Setup Utility” app

[@LifeofGodChurch]

@@heretorecord Awesome. I will try that. Thank you.

[@GisubizoEspoir]

Hi I got a question so I tried to livestream using same camera (Blackmagic studio camera 4k pro :the HDMI cable (the length was 6ft) went from the camera to the Atem mini pro I was trying to stream in OBS but the image was too blurry and bad Any tips please would help thank you in advance

[@PeterVCook]

Do the new Studio cameras (and camera control) work with the older ATEM Television Studio HD you have laying around?

[@heretorecord]

I really need to fish it out and try. I cannot see what not though but it’s worth a shot

[@juninhosimas1]

I have de older atem television studio, and its not working tally with de plus studio 4k. I dont know why..

[@elitheelectronicsguy]

As the ATEM Extreme is only 1080p dose BMD have a 1080p camera? I feel 4k camera is a waste as I'm not planning on doing any 4k switching anytime soon

[@heretorecord]

While the ATEM is only 1080p, BMD already make 4k switchers and I suspect they will release more soon enough. You also get the added benefit in this case of running your love show at 1080p but being to deliver an edit in 4k.

[@Merkicko]

Bro what kind of lense you need? I new in this camera world

[@heretorecord]

MFT or Micro Four Thirds

[@GregStonham]

I love the idea of using network cable for data and POE, but can't see a viable way to do this with my Atem Mini Extreme Iso. Even if I use the studio converter box I'd then have to convert its SDI output to HDMI for my Atem. Anyone know a better way around this?

[@heretorecord]

Not really, I think the POE solution is really for SDI switchers as the complexity grows beyond a usable measure.

[@DigitalCreations2012]

the camera mapping on my extreme only shows either Blackmagic or none...... no cameras show up at kzbin.info/www/bejne/p2bGq3xnqsmcpdE I may add this is with just a bmpcc 4k plugged in. Full colour control though.

[@heretorecord]

You should probably update your ATEMs software to get those options. It’s not needed if things are working on your end, but good to know especially if you get more cameras and mix and match different models.

[@DigitalCreations2012]

@@heretorecord ver 8.6

[@heretorecord]

8.6.4 is the latest.

[@mongkhlsiri]

Still not impressed. Why didn't blackmagic studio camera 4k plus/pro go all out? High and low angle of view practicality is very bad in practical use if the viewfinder image cannot be viewed. Why doesn't blackmagic design allow the viewfinder to tilt up and down? It's going to have the versatility and beautiful angles that a studio should be. For a little while, you'll be dominating the market in this industry but you don't make it happen. Hopefully this comment the design engineers of blackmagic design will see and make it.