BMW E30 325i M20B25 Engine Rebuild Restoration - Time-Lapse | Part 7

[@guni7197]

*Mount the bench grinder!* *_PLEASEEE_*

[@RestoreIt]

SOON

[@guni7197]

Btw. Love your videos! So much attention to detail! 😍

[@doctahwhoopass285]

I wonder how many gallons of paint are gonna be on this car. The cost of all the materials must be astronomical!

[@ayberkgorkan7200]

No shit

[@nicksalvatore5717]

DoctahWhoopass He hand restored most of the parts so he saved a lot

[@isaiahtheman]

Idk if this is a roast or not but if it makes him happy and it’s worth it to him that’s all that matters

[@gus6rocks]

And all for a pretty ordinary car

[@gamercoolapple1]

@@gus6rocks all for that KZbin money while getting a nicely rebuilt car

[@TheDumry]

Your new clutch pressure plate is covered in preservation lube to prevent rusting. Dont forget to wipe it off before installing. Great vids, keep up the good work

[@RestoreIt]

Thanks for the advice Dennis! And thank you :)

[@skeezo]

I cannot wait to start to see the reassembly of this car!!!

[@RestoreIt]

All to come! :)

[@ppop2010]

Plug cap & transmission sensors Is a consumable item. We recommend replacement.

[@RestoreIt]

On it, thank you!

[@slackjaw703]

This is the one channel that as soon as I watch the new video, I always check to see if I’ve somehow missed a new episode in between - but alas I’m always disappointed to find I’ve actually seen them all and will just have to wait patiently for more new content. I might have to binge re-watch all the vids again after the whole car is done.

[@cemhoysaloglu1567]

You inspired me to renovate my e30 4 door sedan. So far i got the exterior done and painted it looks clean and i replaced the broken interior parts with my limited money (im 16 years old 0and preparing the car in 2 years xd) however i dont think i can restore the engine by my self i dont have many tools and experience but im planning to change the sparkplugs and gas pump by myself thank you for inspirating me love you from turkey.

[@RestoreIt]

Hell yeah Cem. Love this comment. You sound just like me when I was around your age. Glad I have been apart of your E30 renovation. Keep going and you'll have a mint E30 with the experience to do others and make a living from it :D Cheers dude.

[@cemhoysaloglu1567]

Restore It Thank you !!

[@metalheadvlogs]

I've got to say, this is taking car detailing to a whole other level...

[@RestoreIt]

Great to hear, thanks metalhead!

[@plasmaxer]

Please say when please please pretty please with sugar on please. I need more on lockdown.

[@RestoreIt]

Thursday all going to plan! Plus u have half a terabyte of e30 m3 footage to edit!

[@ejoautovideos]

You know you're ocd when you're detailing the inside of a bell housing 😂 Great video as usual!

[@RestoreIt]

i think its official. Haha thanks.

[@nobiazcustomsinc5030]

a clean part is easier to diagnose later

[@Dan81825]

I've watched every video from the E30 restoration and couldn't be more excited for the finished car. Great Job!

[@RestoreIt]

Thank you Dan! I can't wait to show it to you. Lots of work to get done!

[@Dan81825]

@@RestoreIt Thank you for sharing this awesome journey with us! The E30 is one of my most favourite cars, especially as i live in Munich, where it was built :)

[@iteerrex8166]

The mother of all restorations! Others are restoring little toys and tool, but this is Whole freaking car. Cheers mate!

[@RestoreIt]

Yes lad! Going big. Glad you're enjoying it Tameem!

[@wk-nu3ri]

Man so many work on gear box you should replace the orings sealing in front and back on output shaft and on switch small one. I own coupe IS and I have done all this. Take my advice. Thanks for your work.

[@RestoreIt]

Cheers W K. I will look into getting these parts and repalce them in a future episode for sure.

[@Felix-hm1ie]

I would still recommend you to change the gearbox oil before you install the gearbox

[@RestoreIt]

Oh yes I will be doing that. Thanks for the reminder, I need to find out what it takes. Never simple.

[@GroovyDrifter]

@@RestoreIt If I recall correctly BMW uses ATF on their Getrag gearboxes, not sure why.

[@Felix-hm1ie]

@@RestoreIt I would recommend you to directly request a suitable oil from BMW. You just have to give them the chassis number and they will find the right oil for your gearbox.

[@gamercoolapple1]

@@RestoreIt i recommend some lube

[@MegaDirtyberty]

As if he wont be.......pfft.

[@TrancerGTR]

I have been watching your channel for a long time and I admire you for perseverance and the enormity of work you put into this project. Greetings from Poland.

[@RestoreIt]

Thank you Trancer. Thanks for sticking around and leaving such a nice comment.

[@ZVONIMIR172]

One thing you absolutely should do is change the gearbox oil, because going threw everything, painting everything and not changing the gearbox oil would be insanely stupid

[@mattiel9156]

He is not stupid

[@RestoreIt]

It's going to be done don't worry, dont worry :)

[@MegaDirtyberty]

Who said he was going to throw everything?, going through everything only to throw it away is stupid.

[@ZVONIMIR172]

@@MegaDirtyberty grammar nazi, I am croatian

[@MegaDirtyberty]

@@ZVONIMIR172 What has that got to do with the price of fish? ie nothing. Where are your videos so we can criticize you and tell you to do something?.

[@yeti200sx]

make sure you replace the gear selector and output shaft seal as they tend to leak these now so would be silly not to do it.

[@alexs8710]

And its a pain in these ass to do it when the gearbox is in the car. Absolutely not speaking out of experience with my E34 xD

[@RestoreIt]

Thanks for the advice Luke, I will get this done.

[@garyparkerson9527]

It's crazy how much I look forward to each new installment in this series! Please, do keep them coming.

[@RestoreIt]

Thank you Gary! Loads more to come and I promise you they'll get more frequent.

[@flipfinish]

To all those saying “he should’ve done this” and he “should’ve done that” I have some advice for you. Buy your own parts washer, paint booth, materials and your own project car and then take all the time and energy it takes to not only DO all this work, but take time to film it for others to enjoy and then post it on youtube. THEN and ONLY THEN do you have a right to tell someone like this what he “should’ve” done. So easy to type a “know it all” comment, lots harder to actually get off your a$$ and do something yourself.

[@RestoreIt]

I love you.

[@RestoreIt]

Best comment I have ever had, ever. I wish I could buy you a pint.

[@electronic7979]

Excellent restoration 👍

[@RestoreIt]

Thanks Dude!

[@2003garyb]

So close! So close! So excited for you! This has been one heck of a job! I think we're looking forward to celebrating with you! I hope you plan to do a KZbin on the first ride so we can go along. Take care, my friend. Talk to you soon.

[@RestoreIt]

Almost there! I can't wait either Gary, and of course I will. I will go full vlog style for the occasion! Speaks soon Gary!

[@500MTH]

Your attention to details is mind-boggling...just remarkable. Mad respect for all your hard work!

[@dimarscars329]

You’re restoring that E30 from the ground up, this thing is going to be MINT!!

[@aarongrabowski5620]

You do amazing work. I’ve seen other restoration videos, but u do way nicer job than the others I’ve seen.

[@JanDootjes]

Great project, nice seeing a fellow guy restoring his car with the same eye for detail as me! Keep up the great job.

[@martinm4961]

Next full engine build, you should spray each component a different bright colour, emphasise the level of detail you've gone to! Pink, yellow, purple, blue, orange, red would be sick!

[@RestoreIt]

That would be very cool! I must do this at some point.

[@_Hangman]

That gearbox came out amazing... The prep work and masking up you put into it paid off. Please as other say though make sure you do the required mechanicals, oil, shifter, release bearing etc. No good looking shiny but being mechanically weak. Good work

[@RestoreIt]

Thanks Marc, It's all to come, don't worry I will do it :)

[@aldenen]

Best videos ever! I'm buying tools slowly as I see you using them! Addicted 😀!! Busy with my car, small bits of restoration. Thanks for inspiration guy!

[@motheolebelo]

Nothing beautiful like a freshly painted gearbox. Cannot wait for the next video upload, thumbs up on this restoration.

[@RestoreIt]

Thank you Motheo! Glad you're enjoying the series.

[@TheBobbyB86]

Looking good man, you always make me realize half of the stuff I avoided is easier than expected.

[@RestoreIt]

Cheers Bobby! Just a bit of time thats all some things need :)

[@Over9000Gingers]

I love your videos. I like that it breaks down the process in detail, it gives me a lot of confidence on doing my own restoration project!

[@RestoreIt]

Really glad to hear this dude.

[@malcolmporter4771]

Been waiting all week for your videos! Always enjoy watching them. Great restoration by the way.

[@RestoreIt]

Thanks Malcom. Sorry it was late. My postal situation at the moment in Spain is bad. Everything should be back to normal this week :)

[@Thoringer]

So, why are there downvotes? I mean, this channel is so niche specific and the execution of the restoration so attention-to-detailed, why would someone watch it and not like it? I mean, if it is not your thing, don’t watch it. If it is, how do you not like it?

[@robshaw6248]

Can't say it enough mate, I love the videos, makes me want to invest in a project car!

[@RestoreIt]

Thank you Rob! Do it mate, well worth the time and effort.

[@robshaw6248]

@@RestoreIt Sure looks like it, Just need to get the other half on board! (a nice workshop in sunny Spain helps as well haha)

[@Bannimann2]

1:00 - LOL, yeah it is another pace of life down there. We could learn something from that uphere in Northern Europe. Great job btw. 😊

[@RestoreIt]

It truly is. Maybe they could learn something from each other, Take abit from both haha.

[@Bannimann2]

@@RestoreIt Haha yeah, it might be a bit overkill to have a four hour siesta uphere, although it would be nice sometimes. :)

[@contradriverESP]

@@Bannimann2 4 horas de siesta dice el nota. Ni puta idea tienes

[@mictaylor9531]

Hi, I’ve just binged your entire library in the last 24hrs - so easy to watch you cracking on - thanks for making the content. I have to commend you on your commitment to the small details - inspiring stuff. Many thanks and regards Mic - Wales 🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@RestoreIt]

Thank you Mic! Glad you could enjoy the catalogue. Lots more to come!

[@Darthrhys2006Gaming]

Spain is on holiday, that's what I love about it, they love resting for example their evening siestas lol

[@RestoreIt]

I kind of like it. Kind of like to get things done... haha

[@NikosDIY]

I've just watched all 7 episodes and can't wait for the next!!! Great job absolutely inspiring!

[@plunder1956]

That is a seriously lovely finish on the gearbox. You almost need a special window in the transmission tunnel just to look at it.

[@leonardocalderin3285]

watching your videos cures my ED...

[@RestoreIt]

Haha glad I can help.

[@mustafaazad7136]

I'm listening to Sinatra and watching this, it's relaxing at it's finest

[@RestoreIt]

Yes Mustafa! How it's done.

[@nic_s5215]

Looking good. I see in one of your comments you are getting new seals for the gearbox... they cheap and removing the gearbox is a pain so better to do them now. As for replacing anything inside the gearbox... if shifting is still smooth... doubt you need to do anything on the inside, but you can change the oil anyway. Never know what might have happened while in the previous owner's care and you can look for any big metal particles/bits which might indicate a problem. You can do the same check with the diff. Although I'm quite jealous of you being able to do this, I really want to see it done. Great work.

[@charliescott2144]

The bit you didn’t no how to take off on the engine wiring look, it’s the big black nut that keeps it locked down on the bracket. Can’t wait to see the end result🤘

[@RestoreIt]

Thanks Charlie! I'll give it another go.

[@charliescott2144]

If you get stuck with anymore and have Facebook join e30 zone, it’s a world wide e30 facebook page and you can ask people any questions. Good luck🤘

[@jclaudii]

I think your training to become a jedi! much patience you have.

[@meinkopf3855]

Glad that you are doing this great work in Spain. ¡Saludos!

[@RestoreIt]

Thank you! a bit hot... but it will pass.

[@jase6709]

It's going to look so nice when it's finished 👍

[@RestoreIt]

Cheers Jay Jay I can't wait.

[@Generalusuer]

Best sponsor you’ve ever had 1:28

[@RestoreIt]

Haha Thanks BigBrap!

[@ivanalbanez1257]

Greetings from El Salvador, these videos are very addictive

[@RestoreIt]

Hi Ivan, thanks for watching, I'm glad I have you addicted :D

[@moedalgarny]

The edit make this looks so easy..respect for the hard work man 👌

[@RestoreIt]

Thanks dude! It is definetly a lot of work.

[@ArslanAhmad1]

Awesome....cant wait to complete this project 😍!!

[@RestoreIt]

Me either! Cheers Arsain!

[@snail415]

Absolutely jealous (the good kind of jealous). You’re living the restoration dream. Great, great work. Wish I had the time and the body to tackle this level of work…because I sure as hell wouldn’t want any help. 😂

[@harrisondose4818]

I wait everyday for a new video to come out. You do amazing work thank you for sharing your project!

[@kunlegrant369]

EXCELLENT WORK AS ALWAYS MR RESTORE .....

[@RestoreIt]

Thank you as always Kunie!

[@homeyshlitz]

Nice going so far Restore It. Remember, drinking plenty of water is key when living in a free oven.

[@briandpascal8081]

Nice video dude, im your fans from indonesia🇮🇩

[@RestoreIt]

Thanks Bil Boy! Glad you're enjoying the series :)

[@Accolade.]

You absolutely right its not perfect . IT'S SUPER PERFECT.

[@grzegorzbrzeczyszczykiewic437]

Greetings from Poland. I am renovating Fiat 126p :)

[@RestoreIt]

Hey, nice :) Good luck!

[@janpawulon2]

Wziąłbys się za normalny wóz

[@sonyhk3824]

Wonderful have a good luck

[@ukpolska5335]

Hey Gregorz, I am restoring an old 1960 Warszawa M20 Garbuska here in Warsaw and if you want to meet up and compare notes then send me a message.

[@atvo8771]

Man, i just love this channel...

[@RestoreIt]

Thank you Atvo, I'm glad to hear it :)

[@heatertony]

When I see your videos, I don't need that kind of medicine :D

[@luisbenitez3428]

I have watched several videos from this guy and he's amazing work, I cannot freaking understand why people would post negative likes on his procedure and work ,you got to be a freaking moron to dislike this guy's work, you bunch of idiots out there ,this guy's giving you a schooling on how to restore parts and car, thank you for the videos, excellent work keep it up,

[@steevemclean8275]

I can't wait for part 127 to see the reveal!

[@RestoreIt]

I'm afraid you're going to have to Steeve! Glad you're excited!

[@fordfan3179]

Ida scraped that skid plate into a garbage can and save my solvent for more appropriate cleaning. When you put it back together get a new pressure plate, clutch, pilot bearing, throw out bearing and slave. You'll be glad you did if any of it's bad. Also, replace the rear main seal on the motor and have the flywheel professionally cut. I did transmission work and clutch work for 20 years.

[@sr20xrarity]

Damn you came so long i cant believe this thing is almost done. These videos are amazing

[@RestoreIt]

It's all I've done for the last month or so! haha I can't wait to get it all back together. Thanks Dude.

[@sr20xrarity]

@@RestoreIt totally i cant wait either that car is gonna look and be amazing

[@mikedaacmech383]

Great job so far. Looking forward to the rebuild!

[@RestoreIt]

Cheera Mike! Me too.

[@Eric06410]

Just found this. I am definitely going to bing watch all past e30 episodes

[@monomixer]

Such a good balance with speeds. Good edit bro! (I’d enjoy it closer to real time as well)

[@RestoreIt]

Cheers Serkan. I have a third channel called East Coast Restoratons you are going to love. A lot of real time footage on those videos. Coming soon!

[@frankbiz]

Wow, you are doing an amazing job. It is so satisfying to watch, I'm sure it is much more satisfying to you to see this all come together. Keep it up, it is a lot of time and work but it will be well worth it when it is done.

[@jonjay8635]

Howdy from the United states of America, love the channel 🇺🇸🤙

[@pvertes23]

I dream of that day... when il be old in a chair. And he will upload video. "Its finaly done, masterpice!" :D gr8 Video

[@RestoreIt]

Hopefully you'll still be alive as will I by that time. We'll get there!

[@Tiagotaf]

@@RestoreIt It's gonna look perfect by the millimetre!

[@rubenolaussen6227]

@Restore It He will definately fininsh it in time with the current amount of effort. Great work!

[@wesleygrenfell7975]

Can't wait to see the assembly. Good job!

[@jeffreycarigon642]

Hell of a clean up. good job

[@RestoreIt]

Cheers Jeffrey!

[@rasmusboxberg]

Absolutely amazing work!

[@RestoreIt]

Thanks Raze!

[@korniksoft4406]

can"t wait to see the reassembling

[@RestoreIt]

Me either! THanks Korniksoft!

[@ryzencorp8182]

this ad makes sense, mostly men watch these videos. Nice choice of sponsors m8!

[@RestoreIt]

Cheers Danny. I have a 99% male audience haha.

[@Riyazatron]

What a lovely job

[@RestoreIt]

Thanks Riyazatron!

[@jodirinaldi3796]

Thanks for share to us, i enjoy every detail

[@RestoreIt]

Good to hear Jodi!

[@georgehuser4711]

I'm wondering how are you going to restore interior panels with this attention to detail!

[@RestoreIt]

Great question. if i'm honest, I think I will need to seak professional help.

[@nicoxis]

you mean a psychiatrist right? hehe, keep the good work!

[@StephenJohnson-jb7xe]

Great video series mate, I am really enjoying watching them. I was thinking during the previous videos about how nice it would be if you plated some of the hardware that could not be painted so it is good to see you are getting a plating kit.

[@RestoreIt]

Thanks Stephen! I have a kit already, I have just abused it learning how to plate with it. Can't wait for the fresh one!

[@nicoxis]

all this unnecessary work... I love it!

[@RestoreIt]

Haha, I can't help myself... Cheers dude.

[@fishstickparty]

There are somethings in life that are absolute, death, taxes, vodka?, and me SMASHING the watch button on my notifications for a Restore It video.

[@RestoreIt]

Haha cheers OJ!

[@timsmith1589]

Dude it looks great, it's too hot in Spain for me bro but I'm glad you dig it.

[@francisconicolaszanotti8043]

So you are telling me you did not change the transmission seals, bearings, and shifter parts? :(

[@TheFilmMixer101]

That is very much needed, he betterrrr

[@ferdi93ferdi]

Thought the same.. also an oil change would take 5-10 Minutes. Aaaand the Clutch fork and release bearing should be lubed..

[@MrHBSoftware]

@@ferdi93ferdi thats not an auto trans..oil can be changed but doesnt need to be changed as long as there is oil inside it will be fine..you can even use cooking oil or piss as long as its wet it will work.

[@MrHBSoftware]

what are "shifter parts"? why would someone rebuild a manual gearbox that is in perfect shape? that particular model of gearbox is know to outlast the car so.....

[@RestoreIt]

I have all of the parts on order! don't worry :)

[@judewebster1113]

removing that oil from the skid plate was noice

[@RestoreIt]

That was so saticfying to do.

[@gutsy.trails.adventure]

Awesome work as always mate! 10/10

[@md4luckycharms]

Roman: HEY LOOK GUYS CARS OLD GUYS LOVE CARS WE SHOULD ADVERTISE TO THE OLD GUYS. The majority of the audience: Oh wow nice, I'm 26

[@jensharbers6702]

I might be late to the party but: Replace the small pin where the clutch fork rests on. They are made out of plastik. I've replaced it with a stainless steel one, lasts longer than the clutch fork. Then the fork itself might have substantial wear, replace it when it isn't in prestine condition. Also replace every bearing, bushing or stuff, because some are then hidden. Replace also diff bushings, gearbox bushings and also engine bushings. Sensorwise use only OEM BMW or Hella/ Siemens VDO, the other ones might not work as expected. Speaking of expierince here, the E39 with it's M52 is very annoying when the sensors aren't from a very good manufacturer...:D

[@realtlt]

I guess even passengers of this car would need to be washed, rust removed, sanded, prime, base and clear coated! ...btw AWESOME work! :)

[@ViktorLab]

Красавец! Отличная работа! Приятно смотреть!

[@nabukhas]

Can't wait to see it in the car

[@RestoreIt]

Long way to go before we see this engine in the coupe. But soon there will be a video of an engine, going to the touring. It's kind of restored, just not to this level.

[@nabukhas]

@@RestoreIt I'm all patent until the moment 😁

[@КошмарКошмар-й2б]

Hi bro 👋👋👋very very good restoration 👍👍👍👍

[@RestoreIt]

Thanks Dude!

[@opp_slayer77]

Plz make more it well be cool and I'm a huge fan of BMW just like you

[@RestoreIt]

Loads more to come :)

[@opp_slayer77]

Thanks for talking me

[@sonyhk3824]

Good job man we looking forward buddy

[@virendrawate2128]

Great, you are perfect restorer. 😊

[@marvinnolte9707]

16:06 , just turn the Cap. Take it of (with that Platstic Ring) Then there is that Big Platic Nut that needs to come of. Just Turn it. (I know thats kinda hard by Hand) But there are two gaps in it so you can use some kinda tool. And than it comes out to the bottom. Pretty easy.

[@joaomateus580]

some people forget that new parts are sometimes damaged faster than the old ones.

[@henriquelsilveira]

More videos, please! I am curious for the next one!

[@punkbloater]

We are getting there, not far of from assembly now. 👍🏻

[@arnhemseptember2009]

Looking good!

[@RestoreIt]

Cheers dude.

[@flashgordon5741]

very good job men !!

[@RestoreIt]

Thank you Flash!

[@danielh.s.k.3544]

I am looking forward to seeing this car !!!!!!!!!!!!!!!!!!

[@tylercross7942]

If you ever get stuck on a boat apply a little of heat with a blowtorch but you have to wait until it’s fully cool or else you’ll snap the head of the bolt off just a little tip just in case one of the bolts get C’s