Bmw E30 k24 swapped turbo

This is my k24A turbo project. Motor is off of a ‘06 TSX. Parts that I used to complete my project are listed below. Hopefully I didn’t miss anything.
Car is not a 100% tuned yet, but it will be on a Dyno tune soon and I will update some more videos after.
www.tf-works.com
kpower.industries
-50degree cam gear
-NGK coil packs
-water pump-US housing
-radium fuel rail
-radium fuel regulator
-radium damper
-turbo Intercooler
-oil cooler
-K-Tuned Swivel Neck Thermostat
-new starter
-new alternator
-stock 318i (M42)throttle cable
-E46 clutch OEM
-Acuity TPS
-Hondata map sensor
-K20 oil pump/winage tray
-4 cylinder coding plug from M42
-9000RPM Tachometer
-stock getrag 260 transmission
-Mishimoto catch can
-Greddy boost controller
-kpower industries swap kit
-kpower upper coolant neck
-kpower complete engine harness
-kpower transmission adapter
-Kpower intake manifold
-kpower 74mm throttle body
-kpower aluminum flywheel /release bearing
-kpower Flywheel dust shield
-kpower ECU hondata
-kpower SWAP IDLER PULLEY
-kpower heater port
-TF works clutch fluid reservoir kit
-TF works turbo manifold
-TF works motor mounts
-TF works ID1050x injectors
-TF works oil pan/ pickup tube
-TF works Tail Q blow off valve (Spring yellow )
-TF works Precision Wastegate 46mm (6PSI)
-TF works GREDDY OIL FILTER RELOCATION
-TF works TRACTUFF OIL BLOCK ADAPTER
-Precision turbo 6266
video made by PNW-E30 k24 turbo
#e30 #e30lifestyle #kpower #bmw #bmwlove #bimmer #e30world #classicbmw #bmwclub #bmwlovers #e30lifestyle #bimmerlife #kswap #k24a

[@jairricardogarcia9140]

Very clean build man! I have a very similar vision for my setup but I’m still working on it. You did a great job!

[@ekkalaksengchantha9748]

Thanks bro🙂🙏🏼

[@isaactrueman3822]

I'm currently doing the same engine swap into my e30 but for now I'm keeping it na.

[@ekkalaksengchantha9748]

Nice!

[@MemoryBox_x]

Killer video my man!

[@ekkalaksengchantha9748]

Thank you!

[@simonburns102]

Perfection, lovely garage 👌🏼

[@ekkalaksengchantha9748]

Thank you I appreciate it

[@nasserkhaja4655]

Super clean build man. I’m doing the same swap in my 318is, but will keep it NA likely. What trans and diff are you running?

[@ekkalaksengchantha9748]

Hey! Thanks I appreciate it. For the transmission, I used my stock getrag 260 and stock diff. NA still gives good power. I Dyno tuned at 205hp with 2.5 down pipe exhaust. That’s my downfall. I should’ve gone with 3 instead of the 2.5. I will upload my old NA Dyno tune video later on. Have fun with your build! You will love it.

[@earvinrangel815]

Did you delete the abs ?

[@ekkalaksengchantha9748]

Yes I did

[@BraddJekki]

Perfect swap 👌🏽 have you got more content on IG? Just needs euro bumpers then you’re done

[@ekkalaksengchantha9748]

Thanks! No content yet. I’m still working on it. yes euro bumpers will look sick for sure 🙂

[@adriansadler9459]

VERY NICE !!! what turbo kit did u get and how is the clearance?

[@ekkalaksengchantha9748]

Thank you! I have the Precision 4266 Turbo with the Precision Wastegate 46mm and TF-Works manifold. With this setup, I can say the clearance is not too bad.

[@MRNYCALIVE]

Bro love your setup. Clean. Can i ask what oil filter telockit did you use. I need to do the same thing.

[@ekkalaksengchantha9748]

Thanks bro. I got a tractuff oil block and the Greddy oil relocation from the tfworks. Easy setup, nice and clean. For the oil filter, I used (K&N hp1002 ). Here are the links for those 2 parts, www.tf-works.com/tractuff-remote-oil-block-adapter-with-10an-fittings-k20-k24/ www.tf-works.com/greddy-oil-cooler-m20xp1-5-block-adapter-type-e-use-3-4-16unf-oil-filter/

[@KBfer976]

what oil filter relocation kit is that?

[@803nigel]

What exhaust manifold and radiator r u using?

[@ekkalaksengchantha9748]

Hey, that exhuast manifold was from TF-works and I’m still using my stock radiator with no problem at all.

[@earvinrangel815]

Question bro did you delete your abs ?

[@ekkalaksengchantha9748]

Hey , yes I did and I re-did all the brake lines. It looks cleaner in my opinion. But everyone is different.😁