Real E30 M3 4piston K24 swapped hits dyno

Mint e30 m3 ditched the factory low power m3 motor for honda power

[@jeremysaudan8718]

Honda should have built an inline 6...

[@BraddJekki]

Fuck man imagine that… Ohh well you’ve got a guy that’s mirrored it & is producing a K48 👌🏽

[@lorenzosmith5932]

Awesome that would be. But would that ever work in FWD setups... That's virtually all Honda makes.

[@mythos000000025]

Yes i6 and a v8 and v10

[@chuckcribbs3398]

I seriously want to do this. But I’d keep it NA. 340 HP raving to 9000 RPM would be perfect for me.Four Piston sells a K20 turnkey hand built motor that will get me there.

[@descentmvm]

should also ditch that intake tube go 4" and have it turn down proven to flow alot more. could be bottlenecking the flow

[@idus]

That 3 min mark is some good info. Pretty much sums up tuning in a couple minutes. Awesome!

[@kirbygreen420]

Luv k20/k24 swaps but they need boost - stock e30 making that torque and almost power- easy achieved w bolt ons. Weight is huge but k24 needs boost to make a actual improvement over even m50/s54 swaps..

[@petrolhead8851]

They don’t need boost! A k24/20 set up will make 320whp naturally aspirated with a street set up easily, especially with itb’s and e85

[@B__L]

You're not making k20/24 power from any of the factory E30 engines with just bolt ons. There's people running stroked and cammed M20 engines on ITB's are barely making 250 at the flywheel. K24 is almost 100kg less than an M50/S54 and an S54 engine is stupid money nowadays. Really no comparison. For the money you'd spend S54 swapping you'd make way more power boosting the K series for similar money. Don't even get me started on an S14. And a non-M engine is just going to be slower. S54 is the only one worth it in my opinion because it's still a special engine but then you Americans literally only care about power and racing in straight lines. You're still keeping up with an S54 swap with a K20/24 frank.

[@petrolhead8851]

@@B__L you’re right about everything you said but you’re wrong about one thing, US Americans don’t always care about straight line racing only! There are plenty examples of American cars doing corner racing! We have auto x racing, American iron racing, road racing etc… I am actually building a 96 cobra with a road race suspension set up..and there’s nothing wrong with big power, who doesn’t love big power??? I myself like a well balanced car, but sometimes I do crave big power

[@nighthawk0077]

​@@petrolhead8851What's corner racing? Sounds painful 😅

[@BraddJekki]

@@B__Lbro is it actually nearly 100kgs fully dressed?? I’ve got an aluminium M52 that I’m about to swap into my E30 pending K24 swap after these kits have come out - so hard to decide fml

[@calvinpeterson3203]

I was out in streets of willow with this guy and all the car tune guys unfortunately this car went down had some electrical issues nice looking car nice guy also

[@kylecurry6841]

Beautiful numbers for a Californian 91 daily driven K...

[@sf1of1]

Slap a turbo on that and it’s making some serious jam 🔥

[@pyroboobysmith359]

Had same setup, same problem. Went with Acuity TPS, problem solved.

[@pyroboobysmith359]

Me too, same, same.

[@bamboosho0t]

Great tuner. He tuned my 2.3T Merkur around 6 years ago.

[@scottkinder4888]

An epic, classic car, worth big money…so much so, it has a swapped Honda engine. No shade though! (absolutely no question I’d rather have this than an S14.)

[@clintclunie4702]

How come you run the LH hub on the RH side? I'm only curious and know nothing about Dyno tuning....

[@Truulovemotorsports]

That tiny intake tube get you a 4”

[@incolink]

is this for racing so you meat the class as its still 2.3 4 pot you can beat on it all season and be able to repair or replace/service the engine ? easier to find bits ? its making the same power and costs about the same as the BMW S14 engine if you had built one .. just if you break one it would be horrible to try find one ...

[@howaynedelisser7646]

How is the setup running rwd Ks seem to be blowing up alot

[@oldskool1979]

The rear M3 badge is not placed correctly.

[@noahnajor2408]

Sweet!!

[@Dardantuned]

There is a mustang waiting for you 🤣

[@Happypandabacon]

shots rk tune is crazy

[@petrolhead8851]

This is a nice looking e30 m3! I love the wheel and tire set up! What wheels are those?

[@Dardantuned]

I gotta ask the owner, he has a few sets.

[@Dardantuned]

I thought they were bbs

[@JeremyPatterson-yw5ik]

These are Jongbloed wheels. custom built wheel for my set up.

[@khalidmahesa3146]

K24 plus 2 turbo.. you can fly dude...

[@dlees14]

Messaged you on Facebook. I am needing to get my e30 M3 tuned.

[@descentmvm]

with a 4piston engine... the amount they cost.. i would ditch the hondata and just go standalone.

[@andrewtruman6279]

baller

[@Dardantuned]

Ultra baller

[@aaronmcconnell9369]

WANT!!!!!! So badass

[@knightrida6829]

Why,why,why

[@caribbeangtr8077]

Very disappointing power gain for K24. Normally you can slap on a turbo and get 500HP.

[@martynrollinson]

Exhaust needs sorting desperately! Sounds like a trambone..😮

[@CL9k24a3]

That is stock k24a2 + dc d.i.c. type of power you got there. Why even bother tuning it on 91?

[@Dardantuned]

Per request from owner because he wants it as a regular car

[@mightyfactory2549]

These are good numbers considering once you factor in the rwd drivetrain loss and still on 91 pump

[@Vgk36]

How bad does that vibrate. Sucks they when they remove the balancer it shakes like hell.

[@Dardantuned]

Which balancer you referring to?

[@Vgk36]

@@Dardantuned the one they remove for the upgraded oil pump .

[@Dardantuned]

@@Vgk36 ohh right, no it doesn’t! No issues!

[@Vgk36]

@@Dardantuned that's wild . Maybe other people are running to hard of a durometer on their engine and trans mounts.🤷

[@agilee30]

@@Vgk36 with the kpower mount arms you can use regular e3024v swap mounts so it makes for a bunch of options for mount hardness. Makes it super nice. My car doesnt shake at all. Idles at 600 without issue.

[@Van_frederick]

👌🏽

[@Burdpvt]

except now it sounds way worse

[@idrinkpowersteeringfluid]

As if s14s sound much better

[@RicardoLopez-of2su]

Good shit playyer

[@Dardantuned]

Thanks player!

[@nickdominic9103]

no disrespect but 250 whp out of a $10000 engine is subpar. unopened k20's with e85 will make that.

[@oussama4629]

i don't think this car was about hp/$, otherwise they would've boosted a stock unopened k24 and get 450/500hp reliably

[@nickdominic9103]

@@oussama4629 i guess makes sense

[@chrisbialy5088]

Yeah definitely disappointing, but the 91 octane is killing it. 93 would probably make another 10+ whp, and e85 easily 30+.

[@agilee30]

@@nickdominic9103 plus rwd drivetrain loss is more vs fwd.

[@dannyllerenatv8635]

The bottleneck is the intake manifold as well. In the 300+ whp range, you typically need something different from the usual RBC or RRC style intakes, something more like an ITB setup, ported skunk2 ultrarace, and such.

[@Salvisol]

Kinda ruined I think. THe original engine makes the car worth more.

[@incolink]

makes about the same power also there is also the 2.5 evo engine .. maybe they have the original motor preserved so they can just beat on the car and not worry I would hate to break a real BMW S14 engine