BMW E36 | What Wheels Fit

[@fitmentindustriesgarage5583]

What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq

[@zenas002]

FINALLY IVE BEEN LOOKING FOR AN E36!! THIS IS PERFECT

[@jerizzome]

I've always loved how 5-spoke wheels looked on the E36, and those OZ Racing wheels hit it right on the mark for me

[@fitmentindustriesgarage5583]

Same here!

[@Kev27RS]

Just a shame that it doesn't have the center caps...

[@3vimages471]

And so much easier to clean.

[@TheSlayer2015]

"Uses a 5x120 bolt pattern" *Shows a center lock conversion*

[@Chattsteezy]

yeah for real wtf lol

[@gabriel-i4o4v]

@@Chattsteezy🤦🏻‍♂️

[@brandoninks264]

This is the perfect video to end my day! The wife and I drove to East Troy, WI today to buy a transmission for my Chevy 305 swapped E36 drift car project

[@fitmentindustriesgarage5583]

LET ME DRIVE IT

[@brandoninks264]

@@fitmentindustriesgarage5583 definately when it's finished!

[@e36boy]

316i sedan with a S52B32 AA supercharger stage 2 kit. Current wheel setup is Fifteen52 Turbomacs rally white 17x8 with 235/45 tires. My other setup is Volk Racing RE30 18x8 with 225/40 tires. Using D2 street coilovers with rolled fenders.

[@Wonderboy_Adam]

I own an e36 sedan. Running E34 Racing dynamic srl. 16x7.5 square with offset 13. Best feeling ever

[@RichardFromageRacing]

I just bought a set of RD GP’s that are 16x7.5 et13 for my E36. Definitely the perfect specs.

[@squardo5548]

My Touring fits no more than 8J ET40 with 225/45/17. ET35 would work if it wasn't for the TÜV, but without rolling the fenders anything else would scrape. Just in the rear tho, front looked like it would work out with the wheels further out.

[@erikwagner5987]

Servus, ich kann dir aus Erfahrung sagen, 8x17 ET20 passt mit nem 205/45R17 Reifen auch für den tüv. Fahr ich so mit orginalen Kotflügelkanten mit nem kw v1

[@lolsau]

How about a lower ET lets say like 15-25 would there be any issues?

[@luxfreak359]

Da schleift doch nix oder hat deiner noch die alten radlaufkanten? Bei meinem touring fahr och als winterreifen styling 160 im 17x8 et34 mit 225/45/17🤔 mein radhaus hat aber schon die umgelegten kanten vom werk aus

[@bradcomis1066]

1997 328is here. No fender rolling. 18x8.5 ET40 245/35R18 front and rear. Continental Extreme Contact DW. A teeny tiny bit of rub on the inner fender in the rear. Front and rear camber is -2*. Dinan lowering springs.

[@yungyasei5595]

i got a pair of work cr kiwami’s in 18x8.5 et38 but i still have to put 20mm adaptors on them so they will be et18… wondr if it’s gonna fit lmao

[@grad0n]

17x9” SSRs et45 with 15mm spacer(so et30) and 255/40 Yoko AO52s.

[@exp9873]

Will 8jx17 et20 with 215/45 tires work on stock suspension without fender rolling

[@mazdarx7698]

i want a set of 326POWER Yabaking for a e36 316i yes the cheapest e36 trim and model you can get doesnt matter but i needed this cus i couldnt figure my offset out

[@kemalyetis4899]

Bro sence ön tarafa ve arka tarafa en fazla hangi olcude takabiliriz bence on 225 45 18 arka 245 40 18 sence nasıl

[@reneboypantaleon9014]

How about 18x9 ET38? Would that fit awesome? Or I need to fender roll and pull?

[@darkotomic9685]

What about r16 et20 7j off widht with 205/55/16 tire on factory suspension?

[@user-il8yw5jb3p]

Stock wheels on e36's have ET35-40 so you would probably have to roll the fenders

[@klausbarbel7046]

1.30 lisa yasmin's e36😍

[@gravity718]

What wheels are those

[@jimmystuck8969]

In the intro, what are those five spokes with like rectangles on the edge. It’s the white wheel that’s two to the right

[@keller7669]

rotiforms

[@wilsonkong2782]

Wanted to confirm that the apex 17x9 with 225/45 won't require fender rolling?

[@jamesrossharry2230]

I've got an 97 328ic hardtop. Been looking for new wheels lately. Thanks for the info. You got a sub outta me for this video alone.

[@camdenwhitman8988]

can i buy your hardtop off of you

[@powdere4donuts]

What size fenders would i need if i buy some 10x10.5 +5 4.5' lip front. 235/40/10 & 10x11.5 +5 5' lip rear. 245/40/18 Would also need 5x114.3 adapters

[@thedandy6765]

can we get this for pandem e36?

[@hsingh630]

Can you fit 8x17 front and 8.5x18 on the rears without any issues? If so what kinda offset do I need to be looking at?

[@imnota]

35 front and probably 40-45 rear, although you could always run more aggressive depending on the tire fitment and if you want to roll the fenders or not

[@mdvp2202]

18” 9j offset 20 and 18” 10j offset 25 with 225/40 and 255/35 with camber kit and coilovers could work on an E46 4doors? I got this crazy deal on Facebook marketplace and I don’t know if I’ll work. Please help 🙃🤣

[@arielkisara3197]

hello i use same velg like that sedan blue e36 with 9,5 rear i want use toyo proxes 255/40 is it safe work

[@fitmentindustriesgarage5583]

245/35 is as large as we would recommend there

[@Kev27RS]

Cool video! The orange E36 at the beginning could have steelies on and it would have the same effect as the ones "shown" in the video... 😂 #StopBlackWheels

[@johnogorman6372]

I've a set 18x8f and 18x9r AXE EX10'S in Orange off my old E90 under my 36 saloon

[@11105angel]

What wide body kit did that blue e36 have at 3:47 ?

[@adrianzieba6052]

In Poland only wider steelies form Opel insignia :D

[@kubawrobel6590]

Not only ;)

[@Kugoi_Studios]

I want to put a rocket buny kit on mine, but I don't know what rims and weels fit with that kit, does anyone here know? If it's 18" better, For everyday use and possibly with air suspension

[@theodoresteffens1238]

nice video, i run BBS RK2's staggered 17's on my 95 m3. even got 255's in the back with some fender rolling

[@lolsau]

How about a lower ET lets say like 15-25 would there be any issues?

[@theodoresteffens1238]

@@lolsau its pretty tight how it is but as long as you shave down the tire i doubt there would be any issues

[@Hatlegratzz]

I been thinking of Watanabe's RS or jr19

[@fitmentindustriesgarage5583]

Both are dope! 🤘

[@thysaab7509]

my dad had 18/10in-the front and 18/11in-the back of the e36-1997

[@novandypramana]

What about 9.5 at the rear offset 30?

[@fitmentindustriesgarage5583]

You can, but you’ll need to roll and pull your fenders

[@novandypramana]

@@fitmentindustriesgarage5583 i already rolled the fenders and camber a bit and i consider to use 235 40 18 for more strech, what do you think, 235 40 18 or 245 35 18 ?

[@MultiTerpen]

Style 21s😍

[@uscp2]

I know this chanel is called fitment industries, but would have been nice too see at least one setup where the tire would even fit the wheel. holy stretch...

[@Lumel187]

So I'm conflicted between keeping the wheels staggered or square them off. I see everyone squares their set ups but don't they come staggered for a reason? Help please ?!?!?

[@Sphyn0x]

They come staggered to reduce oversteer, safety reason. Squared is better.

[@Lumel187]

@@Sphyn0x oh yea I found out lol understeering is deff not it. Full sends with over steer only lol

[@n3utical]

best wheel for e36?- definitely oz hartge 17' 3tlg.

[@r129r16pfl]

For e36 track day bro r17 9j all round

[@downhillfreak9798]

Hi, What do you think about Styling 94 on a E36 Coupe? ;)

[@thedandy6765]

i got a question for you im about to buy a 318 with soft top convertable and ive seen some hard tops for it would you say it looks cool i think it does

[@moshakra02]

@@thedandy6765 yea man they're really cool, I have a 96 318 vert, just make sure you check the seals around the rear window for leaks n what not.

[@MiguelSilva-ym2qc]

Do this for the e30!!!!

[@Vanki4aAssetto]

Work vs ss nardo gray best e36 I've seen

[@Vanki4aAssetto]

kzbin.info/www/bejne/nWfdZIGfgtGdZ6M

[@MarkaVar]

e30 next maybe?

[@jakob2049]

Damn No sedans?

[@rhar1044]

If you put anything other than 17s and stock offset tire sizes on an e36 M3, it will ride like crap. It’s supposed to tip slightly forward for track use so if you lower the rear end it won’t corner nearly as well as designed.

[@versacecondoms1501]

17x8.5 +41 on the rear, 17x7.5 +41 on the front, works?

[@fitmentindustriesgarage5583]

that should fit just fine

[@philipnzau3176]

i need a setup for my bmw e39 and can’t decide on what to do

[@bxgetup183]

Plz do a bmw E39

[@rizkirahmatullah8588]

danggggg finalyyu

[@BUZDRIFT]

7-8" wtf you mean 8-12" :D ET +20 to 0 :DDDDD

[@joshuaporporino1936]

yeah right lmao i fit 10" into mine with negative offset

[@lamuerte7012]

Do bmw e9x

[@arilariffin4086]

Hai Bro. Thinking to put my e36 with Work Emotion D9R 18 inch. Rear is 9.5j offset 38 Front is 8.5j offset 32 What is ur recommended ideal tyre if im not going to rub or roll the fender yea? Thanks.

[@bobross6677]

Thanks ill need this later after i buy the dead m3 near me

[@ybetz02]

Kansei KNP!!!!!!

[@chrisstmt1109]

BBS RC090 with 235/45 are NEVER going to fit in a moderately lowered e36.

[@alexandertraficante5080]

Currently running 18/8.5 ac schnitzers dropped on bc coils with the extreme low kit without rolling fenders very slight stretched 225 Bridgestone potenzas 🤷‍♂️

[@Sami-hl6vy]

Any pics?

[@alexandertraficante5080]

Sami watch @m3nace for full videos

[@restats8533]

Wheres the 16' lol

[@edoud123]

Please do so you want a Honda Accord I'm begging you. Who do I need to email???

[@TheOfficialTLM]

Does it run?

[@deez7492]

e46 please ik y’all see this😭

[@fitmentindustriesgarage5583]

SOON

[@deez7492]

Fitment Industries Garage i love u guys ❤️

[@leavingasap843]

Shirts a bit tight bro

[@NgocPham-mi3ue]

tj hunt

[@justinzuniga3828]

Now E46 PLEASE PLEASE PLEASE thank you :)

[@fitmentindustriesgarage5583]

SOON

[@johnnylam9150]

sargon of akkad

[@sdfE36]

༼ つ ◕_◕ ༽つ👏 Give 👏What 👏 Fits 👏 E30 👏 Edition 👏 ༼ つ ◕_◕ ༽つ

[@Billygoat_27]

🌮

[@umma1388]

Zywoo）））

[@brokenpsu8534]

half of these cars are on reps

[@A-GoldenBar]

The oems wheels are always better