This is a quick tutorial on how I wired my Depo UHP Led upgrade Bi-Xenon Angel Eyes. I purchased the whole headlight assembly and angel eyes came pre-installed. I also installed 8000k Hid bulbs.
Пікірлер: 8
@nguriwaititu165910 жыл бұрын
hey buddy are you still liking those head lights? I purchased these and want to know what your take is? Also did you wire the remote fade in fade out feature and how did you access the cabin? passenger side or drivers side?
@Selfmade34510 жыл бұрын
I'm still loving these lights bro. no problems so far. No. I didn't set the fade in fade out feature on this set up. Hope you're enjoying yours bro.
@yomadman9010 жыл бұрын
Hi i'm literally getting mad trying to understand how to wire these headlights..I m from europe and i dont need daytime running lights automatically when key is turned on (i just want to light them with the first position of the light switch) can i wire them to the old positions bulbs wires? thank you
@Selfmade34510 жыл бұрын
Hi, Not sure if you figured it out by now, but I think your best bet would be to wire them to your corner lights. Just tap into them and you should be able to turn them on when switching on your parking lights. This is even easier than what I did on the video. Just connect the ground wire anywhere with a good ground and then connect the positive trigger wire to the positive wire that turns on your corner lights. Hope I didn't confuse you. Good Luck!
@noeltolentino16907 жыл бұрын
I did follow your all your wiring but my angel eyes did not work.
@cregner10 жыл бұрын
Do you know which wire I should use for t top if it's negative or positive thanks
@Selfmade34510 жыл бұрын
Not sure what you mean, but I only used the T-Taps to connect the trigger wire to the main accessory wire in the main ECU Box (Thick red wire with a solid white stripe assuming you have the same model bmw) . That will activate your Halos as day time running lights---So they will be on automatically when your key is the on position. As for negative and positive, there should be only one set of red and black wires. Black wire is the one that you ground and the red wire you connect to the positive battery post as shown in the video. I was fortunate to get mine with a pre-wired harness. Hope this helps buddy.
@primemeanster9 жыл бұрын
Why wire the lights when you can code them? bmwcoders.com/forum/bmw-coding-programming-29/change-automatic-headlights-e39-sensor-927/