What an absolute monster no one would ever expect a wagon to destroy everything on the road
@humbledcustoms93212 жыл бұрын
I would love to see a video of the engine set-up
@boss_driver325i92 жыл бұрын
Maybe someday… 😅🤔
@Wilus19512 жыл бұрын
wow bro what a nice project, I wish I had a beemer like this one
@CrazyE322 жыл бұрын
Then you need to appreciate it more and don’t call it a beemer…..
@Wilus19512 жыл бұрын
@@CrazyE32 I just call every bmw car a beemer is something wrong with this? Don’t worry i do know how much work was done to make this car 450HP ;)
@sergiovasquez18932 жыл бұрын
@@CrazyE32 weirdo. What’s wrong w calling a bmw beamer. That’s what I call mine
@BJT752 жыл бұрын
@@sergiovasquez1893 wonder what he calls his beemer. Babe? 😆
@noahriske96205 ай бұрын
@@CrazyE32 you good?
@akeelshah79042 жыл бұрын
Sounds nice what parts did u use
@boss_driver325i92 жыл бұрын
Some Turboworks parts
@Tiggerlooker2 жыл бұрын
Yeah I would love to see the engine build on this. can you atleast list what you did? plus the rear diffuser, where did you get it from? I have a 325xi would like to do something similar. has it been reliable? and have you dyno the car? just curious about HP. :)
@matthewjoubert19035 күн бұрын
M54b25💪
@rexsrivanit48072 жыл бұрын
sick asf
@hugomacedo2160 Жыл бұрын
hey bud where did you get the exhaust from?
@uber_na_d3r2 жыл бұрын
... and it's a Touring!
@nicob33636 ай бұрын
Which turbo manifold did you use? wonderful snoring
@4WDM5 ай бұрын
nice, what kind of exhaust setup?
@Hutchman052 жыл бұрын
So I’m considering doing this to my project 325i. Did you do a tune, and if so, where?
@ltx_luke2 жыл бұрын
Are you on stock internals
@Mike-qv5ry2 жыл бұрын
Nice do you run stock engine?
@boss_driver325i92 жыл бұрын
The engine is only depressurized
@iplaycs32 жыл бұрын
@@boss_driver325i9 do you mean decompression head gasket? such as athena or cometic?
@harrypioter1121 Жыл бұрын
Yes, you can get one very cheap.
@sethor_im33362 жыл бұрын
Hi buddy have you got video exhaust setup underneath
@Teogigi1512 жыл бұрын
Stock engine?
@mateos36072 жыл бұрын
How much is the timing advance..
@Mk3Salty2 жыл бұрын
is it an xi?
@boss_driver325i92 жыл бұрын
Only RWD
@beeamwee2512 жыл бұрын
did you do any reinforcements to the engine
@MPP442 жыл бұрын
What’s your exhaust setup?
@niko70902 жыл бұрын
Siemens ecu?
@Khaledghaffari2 жыл бұрын
300hp ?
@boss_driver325i92 жыл бұрын
450 ;)
@Khaledghaffari2 жыл бұрын
@@boss_driver325i9 perfect number 2.5 liters 👍👍
@barryscott48292 жыл бұрын
Id change gear cus downrevs sounds shit
@user-ut3jb7gf1u2 жыл бұрын
How much go can the m54b25 handle on stock engine?
@Breckjay082 жыл бұрын
Around 300hp safely, around 410 max if you rebuild with forged parts
@lars-berit12772 жыл бұрын
@@Breckjay08 it can take 500 with stock lowerend. u need arp headstud for boost over 1.2bar
@Breckjay082 жыл бұрын
500 maybe for B30
@lars-berit12772 жыл бұрын
@@Breckjay08 it Will take 500 but for how long? Try it and than you can say it Will not take 500 :)
@Breckjay082 жыл бұрын
@@lars-berit1277 1.5 rule
@thomasmueller23192 жыл бұрын
why not turbo a m54b30 instead?
@lars-berit12772 жыл бұрын
maybe he dont want to spend extra dollars for the same power he get with 2.5l :)
@niko70902 жыл бұрын
it’s not reliable budget build anymore when swapping b30 with turbo setup and destroy it in first couple months. Bottom end with 89mm stroke isn’t as strong motor with stock internals. But whe you go ”all in” and building forged bottom end, big cams etc, then go b30 😉
@benstephenson8149 Жыл бұрын
@@niko7090 b30 has forged rods and crank, b25 is only cast rods forged crank. worse harmonic issues in b30 but its definitely stronger
@niko7090 Жыл бұрын
No there wasn’t forged internals in m52 or m54 exept b28 and b30 crankshaft, I have b25 and it’s with cast cranckshaft but it’s not a problem with just over 500whp, pistons die first and bent connecting rod are just a result from bad tuning or too big torque in low revs
@benstephenson8149 Жыл бұрын
@@niko7090 oh nice I’m aiming for about 350 at the wheels . The b30 definitely has forged rods though I have just rebuilt one.