BMW E90 325i Xenon Retrofit (Aka Halos)

[@Openseason2011]

Can you do a detailed tutorial on the wiring only I would really appreciate it brother

[@harishkanthi764]

I just finished up the project. Overall, great guide but this guy actually missed a minor step that allows the Xenon's to turn high when you "flash-to-pass" or enable high beams. If you only connect the ground wire, then you won't have the xenons increase during either of those.

[@ItzEmmaunelworld_3]

Another lit content form my homie Edirty9!!!!💯💯💯

[@hudaifaelmezughi1711]

Yessir

[@junkking1776]

Hi, Edirty. Great video! I want to upgrade the OEM Xenon too. Now I know how to modify the wiring, and im looking forward to you coding tutorial anxiously.

[@junkking1776]

Edirty, i have tried this on my car. i found that you also need to connect the high beam + to the Xenon high/low beam switch + in order to switch high/low beam for the xenon. it really works. In addition, i found the warning only appears when the first time plug in the headlight. it seems for the second time its gone. Just share my experience with you.

[@sebes2278]

Hi! It means that I need to do more wiring, to let the high beam work?

[@sr20dett1000]

Doing this same upgrade. Unlike you my Halos do not turn on. My turn signal work and my high beam. But my Halos do not. I need to find someone with Xenon from the factory to see if it's the headlights.

[@johnnywalker5635]

Considering the lights you bought are $1405.00 EACH. I'd say you did great. My halogens on my 2011 e90 suck ass

[@edirty9]

Do you want a set of 2010 Xenon’s?

[@jordynharris445]

@@edirty9I DO 🙋‍♂️🙋‍♂️🙋‍♂️🙋‍♂️🙋‍♂️

[@Benjamin-pj2id]

Love the daily vids man keep it up 👍🏽

[@imthatguypal_]

I don’t even need adaptive angel eyes, I just need those halos on lol. So its that easy huh, just splicing ground wire to the one already in the connector? Got an 06 non halo headlights, hopefully this works

[@harishkanthi764]

Hey man, how did it go? I plan to do this retrofit this weekend, but Im a bit confused by the wiring. Did you get it all working?

[@sr20dett1000]

Wiring is easy. I'm having issues. My low beams turn off when I turn the engine on. I might need coding. If you look on forums some have this issue.

[@harishkanthi764]

@@sr20dett1000 That's annoying man, I didn't have that issue when I did my install. Hope you find your answer, the forums are king lol.

[@sr20dett1000]

@@harishkanthi764 you just did the wiring for #2 and #4?

[@ItzEmmaunelworld_3]

Whats the next mods on your BMW or friends BMW!!!!

[@joeyDrivez]

Hey man could you go more in depth with the wiring? like the splicing and all that. I just ordered some lights

[@edirty9]

It really was as simple as just wiring in the second ground. Then your ballasts work. As far as actually wiring in the adaptive part, we haven’t gotten that far

[@joeyDrivez]

@@edirty9 thanks man

[@rightcoastimports]

any help is appreciated. I did this conversion on my LCI car, but I have no highbeams or halos now.

[@CinthiaGaona]

Everyone when you said $40 👁👄👁 What a bmw genius 😪

[@vernestbyrd1734]

I did my bmw 325i e90 2006 and lights work but the adaptive HID will not work

[@edirty9]

Yes adaptive will need to be coded

[@vernestbyrd1734]

OK I will use bimmer coding

[@stefanmarkovic8180]

Does High beam work?

[@MHTPRO]

I have some experiences in the 2007 BMW 328i sedan I found used adaptive xenon headlight from the 2007 BMW 335i sedan. I try plugged in but only the halo and turn signal working low beam doesn’t work and my High beam stays On With the knob in the “0” position with the car ON. FRM module needs to be coded or programmed no idea I trying the INPA tool, FRM module is okay But it shows yyyyyyy but another module has VIN in it.

[@edirty9]

Did you wire in the second negative cable in like I did? That’s all I did. No coding

[@MHTPRO]

My car at the shop right now for tonight. If they give up then I follow your steps.

[@MHTPRO]

My local shop charges me $746 for nothing. I showed him you guys video and he did exactly what you guy did but low beam comes On And it’s flicker then goes off again. The shop guy said somehow my headlight not getting 12v and also suggest me to code frm module. I was gonna punch the guy for charging just for wiring and I help him with your video. Idk what to do now. I can’t take it to the dealership because they don’t do halogen to xenon conversation. I guess I need to find someone who can code my car remotely.

[@edirty9]

Dang man! Sucks they charged you! Also check your hid ballasts. My right one would turn on then off almost immediately. It was a bad ballast. Do both headlights do this?

[@MHTPRO]

@@edirty9Yes both side and ballast are brand new

[@hudaifaelmezughi1711]

Yessir bruh another VIdeoooooooo

[@jackturner990]

Hey! Because the xenons were adaptive, did you ever have issues with the light flopping around in there? Did you ever get it coded?

[@edirty9]

Never coded them. They just sit in a failsafe position but you can still adjust them

[@jackturner990]

@@edirty9 oh I see, did you have the adaptive modules plugged into the light? I bought two LCI lights for my halogen car... don’t have the modules though so unsure whether they’ll go into fail safe or not

[@viking5256]

Hey! Nice tutorial! I am a bit confused with the wiring. Inside the connector I have a metalplate of a sort. Is it the same at your connector? Because I tried wiring just as you did and just put the second brown cable into the second hole onto the "metalplate", but nothing happened. Still just the halos and blinkers. What do you think?

[@edirty9]

I used a oem pin for the second connector. Did you do the same or simply run a wire?

[@viking5256]

@@edirty9 I simply just ran a wire into the hole xd I can try with an oem pin. ANy idea where to find a good one?

[@denzeltj9135]

Thanks so much

[@ChrisP99]

Have the same old headlights as you did and I just bought the halos that you put on as well. Would that mean i have to rewire everything like you did too ?

[@jackturner990]

After installing the xenons did it still do the down/up movement upon startup

[@AK-zm8jn]

hello, is it enough to replace only the connectors?

[@ricardovega1517]

bro your'e a genius !

[@amandeeppannu9573]

I did it same but mine ding flashes and high beam didn't work Sorry for English

[@amandeeppannu9573]

Doing*

[@joeyDrivez]

40 bucks?! man you need to get me some 😂💀 I’ll cash app you 40 bucks

[@ItzEmmaunelworld_3]

Ayyyy!!!!!🤙🤙🤙

[@edirty9]

Dang bro you’re fast 😂

[@ItzEmmaunelworld_3]

@@edirty9 yh

[@amandeeppannu9573]

You got also light error after installing??

[@amandeeppannu9573]

Please let me know also I want to do same modification

[@edirty9]

No light error

[@amandeeppannu9573]

@@edirty9 thanks for reply

[@DBaddis]

Good info 🔥🔥

[@sebes2278]

Hi! the high beam works with this wiring?

[@edirty9]

Yes

[@sebes2278]

@@edirty9 thaaanks a lot! And how is the setup so far? It works without fails/malfunctions?

[@anthonyjames5067]

Do you think it will be the same for a 1 series bmw? I'm trying to go from halogen to xenon on a 128i

[@edirty9]

More than likely

[@edirty9]

And unless coded the adaptive won’t work so you’ll just have to adjust the ballast with the two provided adjustment holes

[@anthonyjames5067]

Thanks for the reply man 💪🏾💪🏾

[@ivanlagunes5318]

Piggybacking of this question I recently upgraded to xenon on my bmw 128i and I added the extra ground but when I hooked up both headlight they started blinking nonstop both of them. How can I resolve this ?

[@DjordjeSrpski]

hows the city fuel consumption of this car?

[@edirty9]

Not too bad around 20mpg city and 27 highway

[@Lup3r]

Lmk when you guys figure out why the halogens didn't work on his car

[@edirty9]

The actual headlight? We got it working after running the second negative wire

[@samuelreyes6314]

I buy your old headlights

[@edirty9]

$40 bucks. They’re yours

[@samuelreyes6314]

Can you shipping to me yea

[@samuelreyes6314]

I pay the shipping

[@samuelreyes6314]

Puede

[@edirty9]

Si. Manda me menjase en instagram

[@amandeeppannu9573]

We need also conding or not??

[@amandeeppannu9573]

Coding

[@edirty9]

No coding needed

[@gwapo3927]

Aye bro i did this but the xenon stay on for like 10 secs and then turn off any idea ?

[@damjanovicr1195]

Mine too, they flicker and shut off

[@2esps]

@@damjanovicr1195did u figure it out?

[@2esps]

@@damjanovicr1195i have this problem when i first start my car the other one starts flicker after maybe 1 minute but when i start driving and turn them of and back on they work properly even when idling

[@2esps]

@@damjanovicr1195then if i start driving right after starting the car they work great. Just seems to have this problem when idling.

[@damjanovicr1195]

Interesting, one of mine only worked when i kept driving. Turned out both of the bulba were bad, i replaced them and they worked good

[@ItzEmmaunelworld_3]

First!!!!🤞🤞