BMW E92 M3 on APEX Fully Forged EC-7RS Wheels

Ditch those heavy 359M wheels and save over 5lbs per corner with the Fully Forged EC-7RS. These wheels are lightweight without compromise as we've achieved a 50% stiffer wheel vs. our previous EC-7R model, by optimizing our spoke shape and face design utilizing finite element analysis.
Fitment Specs Shown:
APEX EC-7RS in Brushed Clear
19x9.5” ET22 w/ 275/30-19 Michelin PS4S
19x10.5” ET25 w/ 305/30-19 Michelin PS4S
Hit the link below to learn more about the new APEX Sprint Line:
www.apexraceparts.com/sprint-...
Active Group Buy Deals:
Gangup.com
Chassis Specific Fitment Guides:
support.apexraceparts.com/hc/...
#apexwheels #apexraceparts #forgedwheels #lightweightwheels #motorsports #sprintline #apex #vs5rs #trackcar #racecar #wheels #forged #e92m3 #bmw #m3 #bmwm3 #bimmperpost #m #bmwm #bimmerchallenge #drivenasa #bmwmotorsport #e90m3 #e90 #drivenasa #scca

[@JimmyCheng]

Wheels look amazing, mind if I ask what will be the ideal offset for 18/9.5 front and 18/10.5 rear for my E92 M3? Planning to get them in the near future.

[@apexwheels]

Apologies for the slow reply. For the E9X M3, we recommend the 18x9.5" ET22 up front and an 18x10.5" ET22 or ET25 (depending on model). For tires, our go to is a 265/35-18 and 285/35-18 though you can go up a size in width front/rear as well. Feel free to get in touch via email anytime to discuss further ([e-mail])

[@StonebrookRecords]

Did you guys use a spacer for this set up and would 295/35/18 rub?

[@dimiladinov]

Is that alpine white or mineral white? It looks more like mineral white.

[@JimmyCheng]

Oh and also, will there be racing silver versions of these?

[@apexwheels]

For now just Brushed Clear, but we may consider adding additional finishes at some point in the future on the more popular sizes.

[@redduke6000]

I just change my tire on my e92M comp pack to be PS4S 255/35/19f,275/35/19r , can I reuse them on EC 7RS 9.5*19 ET28 f and 10.5*19 ET25 r?( no plan to upsize the wider tires in the future just want to keep a bit wider stance

[@apexwheels]

You can reuse those tires on these wheels, but they are slightly taller and narrower than what we usually recommend. I don't think you will have any rubbing issues under compression, but you may get some light scrubbing up front when at full lock making 3 point turns et c. The wheels shown above are ET22 to better fill out the wheelwell just as a heads up. -Tom

[@depsidynamic]

What are the camber settings on this setup? 305 in the rear!!

[@apexwheels]

I believe that car is current sitting at -2° in the rear, but I would recommend our less aggressive 19x10.5 ET25 with 295/30-19s for most E9X M3s. -Tom