BMW ENGINE OVERHEATING DIAGNOSE AND REPAIR COST

[@mdang3662]

Can you please help... I have a BMW 2014 X3 F25 the Electric Water Pump Bleeding was working fine twice. Then, it stop after I used the Blue Devil Head Gasket Sealer. The Engine getting hot. So, I changed the Thermostat and clean out the Reservoir Tank. Same issue. Should I change the Water Pump? Is there fuse that I should check? I got 3 Codes: 1) CD9010 LIN, Message: Electric Coolant Pump: Missing. DTC Status: Current 2) 1A2004 Electric Fan, Actuating Wire: Line Disconnection DTC Status: Current 3) 1A2002 Electric Fan, Actuating Wire: Short Circuit to Ground DTC Status: Current Please help :) Thank you & God Bless

[@yardmanmotorworks1759]

so the fan is not running and the pump is not working?

[@mdang3662]

@@yardmanmotorworks1759 Yes. that is correct. Do you know the fuse # that I should check to make sure it is not burned. Thanks.

[@yardmanmotorworks1759]

the fuse for water pump is under the passenger footwell and the #47

[@norhelebermj]

Replace waterpump, thermostat, cooling fan, radiator, sensor, relay, and check all fuses, but fan is not running even when ac is on. I get code 002EFE electric fan, activation??? Cannot activate...help

[@yardmanmotorworks1759]

why did you replace cooling fan

[@allenrv]

What website did you get the parts from.

[@yardmanmotorworks1759]

ECS TUNING

[@allenrv]

Thanks

[@yardmanmotorworks1759]

no prob

[@LoopBooost]

Is the waterpump you showed the best one to buy for the price and reliability?

[@yardmanmotorworks1759]

this water pump is genuine Bmw so it should be the best one.

[@LoopBooost]

@@yardmanmotorworks1759 the stock waterpump bmws is awful, lasting around 80-100k. Mine lasted 40k!!

[@LoopBooost]

@@yardmanmotorworks1759 also does the e9x generation automaticly turn off to prevent damage from overheat. Or does it only display shut it off

[@RoadHeros610]

Hey yard man nice vid i thjnk im having that issue did you replace it and did it work afterwards

[@yardmanmotorworks1759]

yes I did replaces it and it is still working

[@RoadHeros610]

Cool so I replaced my water pump yesterday with a used unit with a 2019 build date on the pump and a new thermostat driven roughly 100 miles car is running good car temp fluctuated initially at 15 to 109c then came down to 86c 90 now it's consistent between 96c to 99c with air conditioning on in 90 to 100 degrees weather in The high desert of California .

[@RoadHeros610]

The used pump installed is the original design with plastic front cover and impeller $120 and it's working good .. they say the pumps don't last long but the one in my car was original to it production date of 2011.. my car has 158k on it and the pump was still working but I believe the bearing was going bad .. but still working intermittent... Thanks to all

[@kingsley3811]

Am having the same issue....please how do i connect with you for work​@yardmanmotorworks1759

[@Lomain272]

How much is the carly

[@yardmanmotorworks1759]

its around $80

[@6lue8oy54]

Bro we’re u work what state

[@yardmanmotorworks1759]

CT

[@bankergeorge]

Where u locate big boss.

[@yardmanmotorworks1759]

CT

[@bankergeorge]

@@yardmanmotorworks1759 where in CT. AM from CT ALSO

[@richardhibbert3831]

🇯🇲excellent video

[@youngraybeats]

@@yardmanmotorworks1759 where in Ct ?

[@kevinsmith3168]

My engine light comes on after a few days driving can u explain this to me.. I ave a bad thermostat 😢

[@Akac3sh]

Okay say I had a coolant leak bc of my radiator my car overheated and I couldn’t even start it after I replace the hoses and the radiator will it be okay?

[@Akac3sh]

I have a 328xi it’s in good condition I keep in check with all maintenance one of my hoses just happened to burst while driving

[@stinkteamhighlights2041]

You have to rest set everything or that the battery out and plug it back in

[@rondellbennett2729]

How do you reset everything

[@indigenouskings]

My 2011 535 n55 is overheating and fan comes on more than normal when driving. I changed the oil filter housing gaskets. Ran the pump to bleed the system. It came on and circulating the water. But fan still comes on and overheats. Took to shop to have coolant flush and they said its the water pump, so they didnt flush coolant. But im like, you sure its not the oil thats mixed in coolant system? Because when the screen says engine overheated, the gauge in dash is not saying overheated. Can anyone help?

[@yardmanmotorworks1759]

you prob get this fix already, but if the water pump stop works it will show over heat even if the temp gauge does not show. the computer can detect the water pump speed and any malfunction

[@elmario6549]

I just had the problem Yesterdya , how did you fixed it

[@RoadHeros610]

You probably have been gotten this fixed but the gauge on the dash is for oil their is no coolant gauge .. u have to go into dash menu to see tempeture

[@indigenouskings]

@@RoadHeros610 Nope. Car has been parked for a while now. I have to get water pump and front axles replaced. I didnt notice it didnt have a coolant gauge. I never paid attention I guess. Never really had problems like that.

[@indigenouskings]

@@elmario6549 They said had to replace water pump.

[@bock5150]

Video too long no solution, too many guesses

[@yardmanmotorworks1759]

sorry you feel that way

[@bock5150]

This video suuuuuuuuucks

[@terribletomvu37]

So what you’re saying is that the Carly thing is useless?

[@yardmanmotorworks1759]

no! the carley is what let me know for sure the pump was not spinning