BMW F10 535i N55 MST Intake Installed Sound

[@SRTRELL]

How’d you get the turbo flutter

[@sickaspec9158]

I just ordered mine today it was on sale

[@frazmeup]

how much was it

[@turtwigw2790]

Thanks for sharing!!

[@jacecock]

What other modification do you have done to it

[@michaelcoyle1062]

turbosmart plumbback bov

[@cpgoimy]

Wait am I crazy, but that doesn’t look like a F10 N55 engine bay?🤔 sure doesn’t look like mine

[@michaelcoyle1062]

2015 BMW 535i F10 my friend

[@cpgoimy]

@@michaelcoyle1062 ah, must be an LCI. Looked so much more modern than my 2012. Thought I was looking at a G30 5 series haha.

[@Dremusic718]

Do you have a b.o.v on aswell?

[@michaelcoyle1062]

@@Dremusic718 turbosmart plumb back

[@akakiki4111]

@@cpgoimy It’s the same exact engine bay. This intake deletes the air box and intake piping.

[@r6fatty]

Where do I find all the parts need this for my f10 ASAP🙏🏻🙏🏻🙏🏻

[@kmz108]

Is this direcr to turbo or does it use stock turbo inlet?

[@thejoshball]

not sure if you’re still on here but how do you have the turbo flutter? is it a blow off valve? if so what brand and what did you do to get it like that? i just got this intake and wondering how to get it to that 💯

[@michaelcoyle1062]

Turbosmart blow off valve

[@clarencemeredith3810]

I need this bad, my BMS filter rubbing on my PR coils

[@sidneybaxter197]

Just installed pr coils the same thing is happening to me 😂

[@velocityblueranger3799]

How are the iat? Is it still able to get cool air like the factory intake?

[@Crossaw]

Alabilir herhangi bir sorun çıkarmaz

[@DLau95]

So MST intake and Turbosmart BOV (Plumback) NOT dual port. Will do this?

[@michaelcoyle1062]

Start with just the intake. The car is bm3 stage 2 so more boost. If I were to get another bov, I’d get one that dumps into the atmosphere. I’m pretty sure you’ll get a ton of sound from the intake 1st. The turbo is only a few inches from the filter. Hope this helps. Thanks for watching

[@iamtheo1173]

Is it plumb back and that stututu sound good for the turbo ?

[@michaelcoyle1062]

@@iamtheo1173 yes. Plumb back. Couldn’t tell you what’s good for the turbo tho

[@michaelcoyle1062]

@@iamtheo1173 yes. Plumb back

[@teknodogg]

so if you have this install where would you put the oil catch can =\ ?

[@JusticeNass]

N55s don’t need any type of catch can

[@christopherrichards-yk5hw]

How do I get the flutter I have the intake and mhd stage 2+

[@michaelcoyle1062]

@@christopherrichards-yk5hw turbosmart bov

[@christopherrichards-yk5hw]

@@michaelcoyle1062 that’s all and it would flutter ??

[@michaelcoyle1062]

@@christopherrichards-yk5hw yes. That’s it. Mine was the “plumb back” bov. You can buy one that totally vents to atmosphere too. More of the swoosh sound I guess

[@gavin5397]

What year is the car?

[@michaelcoyle1062]

2015

[@hadibasma3432]

What kind of blow off valve do you have ?

[@michaelcoyle1062]

Turbosmart Plumb Back

[@catalin.c]

Hey, how is this so far? Better than stock intake? Any codes/problems with maf?

[@michaelcoyle1062]

No problems at all. No dyno detail though. Butt dyno says it’s a wash. If you want sound, go for it; if you want performance, spend that money on a different mod imho. Thanks!

[@catalin.c]

@@michaelcoyle1062 ive just got mine but when logging ltft seems kinda high 12%. Ever got into this? Are you on the N55 group on facebook?

[@michaelcoyle1062]

@@catalin.c yes the one by fcp euro

[@oaktown7509]

Is that stock bov too

[@bryantrejo4923]

So performance wise it doesn’t help?

[@tanpenghuang2921]

I cant found this intake just found alot for n20,do mind where you buy it??

[@michaelcoyle1062]

mst-performanceusa.com/products/bmw-f10-n55-535i-cold-air-intake-system-bw-53501

[@tanpenghuang2921]

Bro as i know this intake is already done with turbo inlet pipe is it?means straight plug in to turbo🤔🤔

[@michaelcoyle1062]

Yes. Couldn’t be any shorter

[@tanpenghuang2921]

@@michaelcoyle1062 mind to share your engine bay some pic for me?by email?

[@michaelcoyle1062]

@@tanpenghuang2921 sure no problem

[@dailyfiredup8284]

is the turbo stock and which stage u run ?

[@michaelcoyle1062]

Stock turbo. Bootmod3 stage 2+

[@dailyfiredup8284]

@@michaelcoyle1062 ty man )

[@m3g670]

do you guys know if this filter will be capable of flow arround 550hp?

[@michaelcoyle1062]

@@m3g670 I haven’t looked it up, but I can’t imagine there is an intake with higher flow. It’s literally inches from the turbo inlet

[@anthonyhaywood961]

Is that the 50/50 dual port? Or the Plumb back

[@michaelcoyle1062]

Plumb back

[@anthonyhaywood961]

@@michaelcoyle1062 really i have the whole set up same car everything. No flutter. So one more question sir. They say to get that sound you gotta have the dual port with the cutout section. Did you have to do anything to get that sound?

[@michaelcoyle1062]

@@anthonyhaywood961 I got the sound thanks to the mst intake. The turbosmart valve didn’t make a difference with stock air box if I recall correctly

[@anthonyhaywood961]

@@michaelcoyle1062 yea mst intake is awesome. I got noticeable power added. Well hopefully it kicks in lol idk what esle to do except buy the dual port version. Thanks

[@shmoonasghar802]

Without the bov will I get the flutter sound?

[@michaelcoyle1062]

No, but even a Diverter valve spacer will

[@shaa.sclizzy1631]

Installation video ?

[@michaelcoyle1062]

It is the simplest. Also comes with step by step instructions with pictures

[@Mojojojojoe]

What do I order it from please share the link

[@michaelcoyle1062]

mst-performanceusa.com/products/bmw-f10-n55-535i-cold-air-intake-system-bw-53501

[@rnozx6]

does this intake require longer vacuum lines?

[@michaelcoyle1062]

Comes with everything you need. Install is super simple

[@rnozx6]

@@michaelcoyle1062 thank you👍

[@Nofundsleft]

So what do you do with the stock one?

[@michaelcoyle1062]

That’s a great question. I left most of it in place

[@davidburton7403]

You can either leave it or take it all out

[@Jassiel7alann]

Do you know if this is the better option of better sound? Or the traditional k&n

[@michaelcoyle1062]

I ran the k&n first. As far as sound, the mst produces the loudest

[@tjwohlrab5715]

Did this make an annoying howling/whistle sound around 2k rpm when driving? i installed mine and have been dealing with it for like 3 months now and its driving me insane, About to go back to stock

[@michaelcoyle1062]

mst-performanceusa.com/products/bmw-f10-n55-535i-cold-air-intake-system-bw-53501

[@busterscrugs]

hot air intake 💀

[@kellyvgibbons]

What other mods do you have?

[@michaelcoyle1062]

Stage 2 bootmod3 vrsf intercooler and charge pipe boost pipe & downpipe as well

[@wet_e92]

do you have a blow off valve?

[@michaelcoyle1062]

Yes, turbosmart plumb back

[@renaldowilks1492]

How did u get the turbo flutter?

[@kobysouravong5959]

Probably unplugged the diverter valve

[@lovepreetsingh7641]

Do u have bigger single turbo ?because mine one doesn’t sound like sututu

[@michaelcoyle1062]

No. Stock turbo. But it is tuned on bm3 and has downpipe

[@lovepreetsingh7641]

@ you reckon it will sound same on mhd ? Bcz i have got catless downpipes and mhd tune and i want the same noise

[@michaelcoyle1062]

@ turbosmart plumback bov too