BMW Full Screen | Stretch Display Code | BIMMERCODE

[@Wolly333]

Great Video!! Question about this; I have the 10.25 Android screen installed in my F31 (original 6.5 inch) and can not find the setting for Display size resolution under the 3000HMI. Could it be elswhere in the F31? Thanks.

[@FritzRamos]

Thats a good question, I will look into it and get back to you

[@Wolly333]

@@FritzRamos Thanks. I think I found something for F30 / 31 ; Using Bimmercode in expert mode HU NBT 3005 display_pip_config section Change CID_Display_res Change CID_Display_ size Now go out and enter 3001 EXBox section Display_Variante and change from schmal (German for narrow) to breites (wide) Now go into 3006 Navigation section Find Display_Size_Resolution and change from 800x480 to 1280x480 or to…….? I still have to confirm this but believe it could be the settings for the F30 / 31. Wanted to share this for everybody with the same issue. I hope this helps. Regards, Harold

[@FritzRamos]

@@Wolly333 That is so awesome. Thank you for sharing. I hope you dont mind if I pin your comment.

[@Wolly333]

@@FritzRamos Hi Fritz, I found the problem with my BMW and it is all about the Head Unit version and not the model of the car. I drive a 2013 F31 that has a HU_CICHB Unit and this version can not be set to 8,8 or 10,25 resolution. That is why I miss these options. The only setting available is wide screen (Display_Variante = breites) and then I can choose the 6.5 inch widescreen in factory setup but the resolution is not perfect so I prefer the split screen. Only OEM BMW navigation looks better in wide screen. Not a big problem because the Android screen is just great in HD 10,25 inch exact like in your video’s and the best upgrade for my BMW. The other settings are probably for cars with the HU_NBT (EVO) and I hear that also the EntryNav version can be set to 8,8 or 10,25 (1280x480 or higher) I noticed in your video you have the HU_NBT. (see the header under Headunit in main screen Bimmercode) Hope this helps other BMW owners. Thanks for the great video’s.

[@69contreras]

I have a 2013 328i and can't find the Display Size Resolution under the 3000HMI

[@mrshah1520]

Best video! I've spend £500 on afterMarket andriod system and the display resolution was getting crazy every time I switched the ignition, with your instructions I've managed to sorted this issue thanks

[@adrianperry5693]

Brilliant!! I’ve used your guide as my first try with Bimmercode. The step by step instructions made following the process super easy! Full screen display looks 👌!! Thanks!

[@FritzRamos]

Glad it helped!

[@mdawson101]

Amazing channel! I had an issue after a dealer ‘bricked my andream head unit which did not display as usual (very stretched) after completing your instructions via BimmerCode it’s back to normal. I wouldn’t have been able to complete without it! Thank you so much!

[@mchiappe]

Hi Fritz. Thanks for sharing your knowledge. I’ve got a 430 grand coupe 2020 with the original screen and apple iPhone. Just doing the first part would fix the issue as well? Thanks for your feedback.

[@FritzRamos]

I'm not sure. Do you not have the 2nd option?

[@13adrian]

Just done this on my 2014 f30 335d haven't looked at everything but it all seems OK I didn't mind the split screen but thought I would give it a go A very informative quick video nice and simple

[@dmitriyfalberg2671]

Do you have instructions for 2018 X3 G01 ?

[@Myromano14]

Hello, very good video. Thanks, do you think about a class A, i want to enlarge carplay. can I do the same? if yes or buy this product

[@kishos.k2873]

Hi , great video ..do you still have the system and any issues with it ? One thing I’m worried about is lagg and late responsiveness

[@FritzRamos]

Thank you! I still have it, honestly I like it. Once it boots up completely, there's no lag at all. Sad thing is it takes just under 5 minutes

[@kishos.k2873]

Fritz Ramos 5 minutes to boot up once car is turned on you mean ?

[@FritzRamos]

@@kishos.k2873 Yes. It used to bother me but better than not having nav

[@kishos.k2873]

Fritz Ramos thanks , that’s rather a long time I must say .. do you think the 8 core 64GB version would be faster

[@FritzRamos]

@@kishos.k2873 it might, but if you only plan on running basic apps like mirror screen, carplay, or nav I don't see it making that big of a difference. If you plan on doing more than that it would be more noticeable

[@ruhulshah7035]

Hi Fritz! This video is awesome, your the only real guy that actually shared how to do this. I have a bmw 3 series f30, if I follow these exact steps will it be possible to make my apple car play full screen?

[@FritzRamos]

It should work no problem, you might need a dongle though. kzbin.info/www/bejne/aovJeH6Zrc5krs0

[@ruhulshah7035]

I have an iPhone, is it still the same process?

[@matthewnicholas6365]

I couldn't seem to find the display size settings in bimmercode? I'm not sure i even needed it though I just tinkered with the settings within android and it seemed to fix it. But I already had the largest oem screen size so maybe I didn't need to code it?

[@MrStevodaevo]

Would these steps be the same for the f82 m4?

[@jurgenk.1802]

Hi, it's a nice video - thank you. I want ask you to BMW G31 which has a original Display. Is this way with BimmerCode or anything else (E-Sys) possible too? I tried to look video with Screen Mirroring, but it would be nice to have a bigger picture. What do you think about it?

[@apolaki94]

Does this also work on a BMW f36 and if yes, the same way ?

[@ninamg7]

Fritz, for sure I can help but You're doing an awesome job and it's not the pronunciation, it's your thorough quality videos that we will learn from... so keep on keeping on Brother, I'm staying regardless! :)

[@FritzRamos]

Thank you so much Patrick! I believe that is the kindest thing someone has commented, really made my day. If you're ever in the bay area let's grab coffee or lunch!

[@ninamg7]

For sure I've been taught no matter what opposition I may face, sometimes it's a kind word , expression or just a friendly gesture that outweighs all the negativity, and most of all Fritz, I put God first in my life and family to remain the person I am. 😊

[@FritzRamos]

@@ninamg7 That is a wonderful viewpoint on life and I am happy to meet you. I would also like to say, thank you for your service.

[@ninamg7]

@@FritzRamos Thank you, I was injured my retirement year but I surround myself with very positive energy like you. Therefore I persevere through my trials of life😇

[@FritzRamos]

Thank you for that! I hope you are all recovered now and love to hear that you have great people in your life. You deserve it and will achieve all that you set your mind to.

[@ИванДимитров-х3е]

What are the capabilities of binercode? Can Ista P suggest anything more or can I do any retrofit with bimercode? If I install a HUD module on my e60 will bimercode be able to code and acrify it? Thanks!

[@zohra1770]

Mine android navi doesnt have that factory setup in settings (2:57). Does it come after the coding? Or should it be there normaly?

[@FritzRamos]

Do you have the android screen or a oem BMW screen

[@zohra1770]

Fritz Ramos i have an android screen same as you but from a different seller.

[@FritzRamos]

@@zohra1770 Hold down the menu button . It should switch to the android side

[@zohra1770]

Fritz Ramos yes i know, or tap the screen. But i dont have the setting where i need a code to access. And change it to 10.25

[@FritzRamos]

@@zohra1770 message me on IG @vroomtuber with pictures

[@groborzk5]

Hello, nice Video so far. Mine doesnt really want to work. Do you guys have any Idea why? i cam from a 2017 F21 with the buisness navigation (6.5) and tried to code it like in the video but i have always a 2-3 inch black space on the right sight and i dont know why. Any advise?

[@ginooh2233]

awesome video 🤯🤯can i do it for my mini cooper s F57？

[@FritzRamos]

Thank you. I believe so. Run the demo mode of bimmercode then you'll know if they have the option for your car.

[@mazinhomzn5804]

It doesn’t seem working on F30 2018 equipped with the original 10.5” iDrive display. Did a scroll down the 3000 HMI list and found CARPLAY_FULLSCREEN, then activated. However it just set the Apple CarPlay area to blank. All the App icons remained in the same position, no display stretch, no other changes.

[@cutie-vx4cw]

Did you ever figure it out?

[@mazinhomzn5804]

@@cutie-vx4cw Nope!

[@S.O.W.NorfolkVA]

I have a 2021 x5 can you PLEASE!! walk me through were to go in the bimmercode to get full screen when I Miracast

[@Macings01]

Great Video indeed ! Can this be done on a G20 ?

[@FritzRamos]

Yes. Just make sure to pick the screen for your car

[@Andrew-ii5kp]

great video, very helpful. i noticed that when viewing sport displays, it's slightly off to the right, i'm wondering maybe the 1600 x 600 resolution is causing this, im gonna try the 1280 x 480 to see if it comes out cleaner. i'm ocd lol 2015 base 228i f22 NBT oem back up camera and parking assist

[@Andrew-ii5kp]

UPDATE: tried the 1280 x 480, and even switched back and forth, made no difference...for both the idrive and android sides, therefore, i left it in 1280 x 480 mode, what was your rationale for 1600 x 600?

[@FritzRamos]

I think because it's an android tablet the resolution is a little better so it can handle it. As far as it being a little off, it most likely will be. The code we are adjusting is meant to go with the bmw screen which I believe is a little shorter and longer. The android screen is taller and shorter.

[@TheJaymnj]

Hello. I have a 12.3 android screen. Do i still need to follow your coding instructions to get a sharper image? And do i chose the 1280x720?

[@johnfernandez9624]

Great video, Fritz. Do you know where I can get the same codes on the bimmercode app for my 2018 X5. Thanks

[@pshuttle]

Fab video. Recoded/Changed screen size in my 2014 F10 from an original 6.5" NBT to a widescreen Android display without split screen. Looks much better. Thank you!

[@traderbaako1687]

Is it possible to do this on a larger screen like a 12.3"

[@FritzRamos]

I'm not sure if a company makes on that size, but it would just be taller

[@luiforte]

Hi Fritz came across your video and very helpful indeed. I'm curious about your Android head unit as I'm searching one for myself especially touchscreen such as yours. Can you provide me a link suitable for an F30 I currently have the NBT EVO ID5, does this unit still retain all the BMW factory options in idrive.

[@FritzRamos]

amzn.to/3avyF4C This one should work. kzbin.info/www/bejne/Y6Wxepieq8mrh7c

[@kelvintan8137]

Hi..Just a question, Do i need to purchase the BimmerCode App or can i use the free version to change the display?

[@FritzRamos]

You need the paid version to change your cars code, but if you just want to look if bimmercode has the necessary codes for your cars that can be done on the free version.

[@mohamedkermali1519]

Hello Fritz Can you help with coding a 4 series to a 10.25’ Or is it the same as in this video?

[@bartoloraffaele6795]

What are the differences between the 4 screen types to select? I had the 6.6 inch version and I upgraded to the 8.8 inch android version. In the "Display_Variante" section there are different types, how can I understand the right one to select? Thank you

[@ajabellon]

Awesome Video. Thanks for teaching!

[@FritzRamos]

Thanks for filming! 😂

[@NITO3570]

Will this work in a 2012 BMW 328i (F30)?

[@aleksandarjovanovic454]

@@FritzRamos Greetings. Can you tell us the secret where you found the encoding instruction in expert mode, because what is offered in beginner mode is very small. Thank you.

[@FritzRamos]

@@NITO3570 Not sure. If you download the free version of bimmercode and use the demo mode for your car you can see if it has these features. If it's in demo mode then it will work

[@FritzRamos]

@@aleksandarjovanovic454 Honestly, it was just through forums. I can try to find the post again though. There's also another video on this that helped

[@lowlaywei87]

Does the full screen option available for Mircast screen mirror?

[@castpro3494]

I have a 2019 G01 X3 M40i, Any help to get this done will really be appreciated. I’ve search but i cant fing enought inf to do it, i would also would like to add Screen Mirroring, from my Iphone to the Screen. TIA

[@mojrepertoar]

Fritz, thank you very much for sharing this video. I did it exactly as you described and it works for my F31. Any idea how to deactivate the Android parking assistent? I'd like to use just the default BMW park.assistent.

[@FritzRamos]

So when you put it in reverse the android parking assist comes up not the BMW?

[@mojrepertoar]

@@FritzRamos yes, exactly.

[@FritzRamos]

@@mojrepertoar Go into the android units menu and select OEM when it asks you to select the backup camera

[@mojrepertoar]

@@FritzRamos my car is not equiped with the camera system and I don't have an option to select the OEM camera in the Android menu neither... :/

[@youridol]

Will this work for the g20?

[@ColemanKiid2k11]

Does this only work with car that has navigation? I have a 2013 f30.

[@FritzRamos]

No. If you upgraded to a bigger screen you can does this in. That's what I did

[@kevindawson2565]

Hi Fritz I have a 2017 3 series 22d SE, followed all your instructions saved prior to coding (phew), how do you know what the variant for the 3 series is, any help would be much appreciated. Just read one of your replies re the F31 and 30 i'm wondering if you did verify that your assumptions were correct

[@FritzRamos]

I wasn't able to as I don't have a car to test it. Any lick on forums?

[@kevindawson2565]

@@FritzRamos Hi Fritz thanks for getting back to me, not tried the forums yet will give them a go, and will study the coder some more see if I have missed anything great videos by the way. Kev

[@danmax779]

Thanks it works! 👍🏻👍🏻👍🏻

[@FritzRamos]

You're welcome. Happy to help

[@nickdixon2164]

Hi does this work for the f10

[@FritzRamos]

You can run the free version of the app to double check

[@nickdixon2164]

@@FritzRamos hi thanks already got full version of bimmercode I've got 6.5 oem screen got the 12.3 android screen coming would I be able to code screen to bigger layout

[@griseldafarias7518]

Would this work for the original screen on an M4 apple CarPlay?

[@kolic22]

Hi FR is it possible activate carplay on original HU nbt_evo using bimmercode ? Thanks in advance

[@mohamedkermali1519]

Hello Hoping for your help How can I program a 4 series for the 10.25’

[@romasremla6162]

possible to BATTERY register new one ? possible make airbag from usa to eu ? dual to single ?

[@FritzRamos]

Sorry I don't understand your question

[@romasremla6162]

@@FritzRamos omg. from usa airbag to european aitbag fault ?

[@FritzRamos]

@@romasremla6162 no fault is triggered

[@romasremla6162]

@@FritzRamos how check faults in bimmer?

[@FritzRamos]

@@romasremla6162 there are no faults when doing this. If you're asking about checking codes bimmercode does not do that

[@QasimJP]

Hi, after I done this code, in the vehicle status section i am unable to see the “service requirements” and “check control” Do you know if there is any way around this?

[@bigdaniyal]

I have this monitor but I don't have the options you have

[@konair7]

Works ist at the Original Display ?

[@maxangel7688]

Fritz, i have a 2020 3 series and cant seem to code it to be in fullscreen. It is original from bmw (not after market). I bought the vgate and bimmercode. Any ideas? P.s. I didnt see an option for 1600 resolution like you

[@FritzRamos]

It has a half screen on the bigger display from the dealership?

[@maxangel7688]

@@FritzRamos it is the standard 8.8 in screen that comes with the car. I hate the split screen function.

[@Zombie_Noc]

i have a 6,5 screen and i want to change by oem 8,8 bmw display ... can i use the same codes that you show with BimmerCode for a oem 8,8 screen?

[@FritzRamos]

Should be the same on all the 2 series

[@brianburns2335]

Hi Fritz have the F30 with the android screen purchased BimmerCode and adapter can would this be the same for the F30 none NBT I use to have the 6.5 screen originally

[@FritzRamos]

It should. Check the demo mode for your car and see if you have the codes first. The demo mode shows you everything that the app can do for your car

[@TomTom-zd4mb]

Is IT the same bmw 2er active tourer f45 2016?

[@Termo128]

works with carplay?

[@FritzRamos]

Yes, but it's not perfect kzbin.info/www/bejne/aovJeH6Zrc5krs0

[@melvincaronongan166]

Hello. I have bmw e60 6.5in display without nav and bt M-ASK system idrive. I just got an android HU 10.25in CCC display. Everything works sounds, radio, cd. But when I go to orig car menu, it says no signal on the display. Does it need to be coded? Can bimmercode fix the issue of no signal on idrive? Will it be the same with your procedure. Pls guide me on this. Thanks

[@hss1527]

Hi, were looking into this with a friend, but the "Expert mode" option in bimmercode was not available... any advise on what we did wrong?

[@FritzRamos]

What is the year and model of your car. The expert mode should be available.

[@ninamg7]

Hey Fritz, Great Video, I like your vids my friend, very professional, unlike others that have to ramble for 20 minutes to show how to do a 3 minute code. I appreciate you Brother, keep it coming! :) Oh, I'm a retired veteran and being that our cars are German, "ei" words are pronounced "I" and the reverse for "ie" words pronounced "E" and "en" has the "ern" sound. I know it's a doesn't makes no difference thing when coding but just a habit from being stationed over there for 9 years. Ok, Thanks again for the great video and I'm dropping the too much talk videos for your quality vids, just like Kies Motorsport!

[@FritzRamos]

Thank you for the word of encouragement!🙏. The pronunciation is in reference to the second code, right? I believe I understand what you said, but would you mind sharing how to pronounce both words? Thank you in advance as well as for your insight!

[@amrsaad3446]

does it work with apple carplay on bmw f30 2017 original head unit ??

[@FritzRamos]

Hi. No this won't work on the stock interface

[@jovan817]

Is the screen adjustment the same thing that everyone seems to be charging $40 to $200 to do for CarPlay?

[@FritzRamos]

I'm not sure. Personally my carplay is a bit stretched, but while I'm driving it doesn't really bother me.

[@jovan817]

@@FritzRamos I actually found this video and dude did it another way. I think this might be a better, native way to do it. kzbin.info/www/bejne/q3yUaaJopL2Arrc around the 30:20 mark.

[@jovan817]

@@FritzRamos try it out. Let me know if you have better results. I think the way you did it might just be literally stretching it. See if you get better results brother.

[@FritzRamos]

@@jovan817 Thank you, I'll look into it. It's just the carplay component that's stretched. The idrive and android sides appear to be good.

[@soul_t3620]

I upgraded mine to after market head unit aswell. But when I open up bimmercode app. The headunit is not on the ecu menu. What can I do to code my headunit? Thanks

[@marc-andrecote1314]

Is it the same for 2019 M4 ?? Thanks :)

[@FritzRamos]

If it's the nbt it should be

[@a8rt]

Awesome video! However, my f20 2016 screen starts to tear when i follow your steps. Is there any fix for this?

[@FritzRamos]

What do you mean by tear?

[@a8rt]

@@FritzRamos like static lines across the screen

[@FritzRamos]

Double check that your connections are fully engaged. If so try something like electronics cleaner amzn.to/3g3Bzx9 for the connection points. If the problem still persist request a replacement unit

[@a8rt]

@@FritzRamos I see. However, when it is set to 6.5" full screen it has black bars at the side and it is magnified and stretch. Idk if this is also an connection issue. I really hope i could fix this issue as i have a reverse camera and it is affecting it badly! Thanks!

[@FritzRamos]

Try this kzbin.info/www/bejne/bn_VgYmEqJdgecU

[@rtamanna]

does it work on 2020 x3?

[@FritzRamos]

Try using the demo mode on bimmercode for your car

[@pawesledz6974]

Hi I would like to change to Android where I should look for right one to my car ??? I have bmw x5 f15 2016 I think is nbt evo id 4

[@AntonioFernandez-gq1vg]

hello, is it possible to increase the screen display from 8.8 to 12.2 inches of a bmw g20?

[@FritzRamos]

I have not seen anything in the aftermarket space so far, but I would imagine that you could take an oem one from another car.

[@bmwlovergaming]

Thanck you very much for this vid bro ❤️

[@ntcoke23]

Does this work for F15?

[@sebastiancentamore3076]

Hello Fritz, do you got any tip for me: I got the CIC Version but I can't find the "DISPLAY_SIZE_RESOLUTION" in my 3000 HMI ... there is no way to set it to 8.8 Inch and so I got this shity split screen on the right ... Or is this Setting only for NBT Version available ???

[@ObbyD]

Hello, is there a reason why i can only find the Field "headunit" in demo and not when i try to code my BMW f30?

[@douglasparis7546]

same here with a f20 lci. Did you resolve it?

[@seanf3255]

Do you know how to enable Apple CarPlay with full screen using Bimmercode ?

[@FritzRamos]

Sorry, not on the stock configuration

[@seanf3255]

Fritz Ramos can it be via expert mode.

[@FritzRamos]

@@seanf3255 yes. It should be similar to the video

[@seanf3255]

@@FritzRamos Thanks

[@ceyhuncora]

Hi mate. My factory code wasn’t the same. How can I find my factory code?

[@gerardoverde8005]

Hello I saw your videos are great congratulations but I can not connect mine buy this Android 8.1 Car GPS Radio Navigation Navi Headunit Wifi for BMW X3 E83 2004-2009 but the idrive knob does not work I will have to connect something else my BMW is X3 2006 you can orient me thanks

[@FritzRamos]

No the idrive knob does not work with the android side of things. I was disappointed when I found out, but you get used to it.

[@shadiomar4193]

I’m buying a 12.3 inch screen..should I select 10.25?

[@jnjperformance]

And with OEM reverse camera with PDC?

[@carsinourdna9388]

GOOD VIDEO 👍🏼

[@FritzRamos]

Thank you for the support!

[@rainmen2k]

what if you didn't have a screen and added a 10.5 by cutting the dash to install and I only had the professional HU 2011 e90

[@tritamhuynh1847]

Hi mate, My car is 530i 2017 model and I couldn’t find display res on 3000HMI mode. I active Full Screen Carplay mode but it seems not work. Can you help me how to set up?

[@bryantklasse8976]

Hey man, I need help! My car is a NBT Found your video and it not working for me. My Radio works but screen is black. Trying to code it using bimmer code...but dot. Know where to go The first step isn’t popping up on my end. But the second step does. 2012 328 upgraded to a 335i screen 8.8 (L7) Purchased this on eBay. Apparently it is for 335i models only. I realized their small description on the bottom stated it will only fit 335i N55 models. Any input would be appreciated! I could easily post it up for sale, but also would like to make it work on my car! Things happen. Lol Thanks 🙏

[@FritzRamos]

Same thing happened to be the first time around. Check the fuse box in the trunk of the car under the trunk liner. Reference your fuse sheet to find the blown fuse.

[@bryantklasse8976]

@@FritzRamos Ended up finding a solution apparently the production date for my car is before a certain thing was available so apparently I won’t be able to code it I have to swap everything out which is going to cost me over 2000

[@FritzRamos]

@@bryantklasse8976 Really?! Is that from the manufacturer?

[@bryantklasse8976]

@@FritzRamos he’s it was introduced 7/2014 I believe my car was made 2/2014 so without my ca being made from 7/2014 and up, I won’t be able to code it. Sucks. Super bummed out

[@FritzRamos]

@@bryantklasse8976 If I find something for you I'll send over a link

[@googerly2323]

I try to do that too but my screen turned off and never turn it back on also my backup camera not functioning after that. Need help

[@swiftMyDay]

Does anyone know if this works on a BMW i3 2018?

[@brunofernandez6631]

I tried to do this with my bmw f15 x5 and now my idrive screen has gone blank I can’t see anything I have tried to reset using the power button but still blank how do I get it back to work

[@d7onevision]

Hi @fritz I have a 2011 BMW 740li it has an CIC system and using 6.5 inch screen, I went to eBay to buy a preowned 10.25 inch screen OEM from BMW 7 series. I tried to install it there are issues like it has double lines when i installed it. I have a bimmercode app and I tried looking for the display settings on the 3000 HMI but I couldn't find it. Hope you can helo me :) Thank you - Ben

[@DeutschlandTech]

Hi I have BMW series 2 F46, 220D X DRIVE but Bimmer dose not show the Video option to activate the video in motion..can you please help?

[@rashidahmed6199]

How do i add netflix?

[@FritzRamos]

kzbin.info/www/bejne/amGll5SsoL6lnq8

[@StudioSasha]

Hi Master ! i Have BMW 528i LCI e60 2010 All original Work perfect. After Install Android 12 Carplay All work perfect,but Diagnostic ISTA D All Modul Three green - only CID Red. Its normal or i need coding New Display ? Thanks.Best Regards,Alex

[@rb3rtgr]

Hi Mate, I have done everything however headunit module does not appear in the app.

[@jgomez7725]

Can someone tell me if this is the same method for a 2018 G30? thanks in advance

[@traceykiddy3849]

Hiya could you tell me how to set up touch only mine is not working 😔 I have to use a usb mouse I've a BMW X6 2010 cic running Android 4.4.4

[@MihailoRubezic]

Help i instal a android bit i mu bimercode 3000 HMI no option display resolution

[@FritzRamos]

WHat car do you have?

[@MihailoRubezic]

@@FritzRamos bmw f31 320 2013 year

[@sebastiancentamore3076]

@@MihailoRubezic SAme here for me, I got a F20 2013 ... before I had the 6.5 Inch screen ... everything works, but I also dont have this setting find in BimmerCode to change it to 8.8 Inch ... any Ideas ???

[@mrmoe5223]

I don't have display size resolution as an option

[@krisztiankaszas1902]

2012/10 F31 HU_CIC. Anyone know how to solve it?

[@owen959]

Anyone know why this doesn’t work for me? If I do exactly as he did in the video when on I drive the screen resolution and sizing looks good but cuts off completely black about half way through

[@apolaki94]

What's the difference between 1280x480 and 1600x600?

[@FritzRamos]

Screen resolution. This can vary depending on the aftermarket screen you have

[@apolaki94]

@@FritzRamos everything worked!! Thank you so much :)

[@jdeg4life]

I have a f30 and I can’t find the display size resolution under the 3000hmi or anywhere please help!

[@FritzRamos]

It's not there in expert mode? message me on IG @vroomtuber

[@prabhjeetsran88]

Hello, I did a factory reset on my Android Head Unit. Now my android screen interface doesn't display on full screen, but the factory Menu displays on full screen. And I don't see the resolution setting in Bimmercode. Any suggestions?

[@okpoobi]

Great video Fritz, but I think u need to update this video. BimmerCode is not the best choice to code the screen... I have a 2016 228i and BimmerCode could not code my screen. 1/3 of the screen was black, no matter what I did. Used E-sys and coding was successful on first try, full screen goodness at 1600X600.... don’t wanna call BimmerCode trash, it’s good for some things, but E-sys is the better choice.

[@huawang1893]

I played with bimmercode, and the screen will turn off by accident. How to change the settings in bimmercode to bring back the idrive screen? By the way I tried restore did not work. Thanks

[@FritzRamos]

I haven't had this problem. Try checking if you plug is fully secured to the screen

[@mpt]

Screen showing 2/3 of original menu. Any ideas?

[@fei9100]

"schmales display" = slim display, "breites display" = wide display

[@FritzRamos]

Nice! Thank you!

[@jonboy6750]

Doesn’t work on cic head unit .

[@FritzRamos]

There's not a CIC unit?

[@entar285]

Will it void my warranty? Does it work with an F48 with Android after market Himax screen?

[@FritzRamos]

Most likely, but it's plug and play. Just undo it before you bring it in

[@mr.eldiablo]

Thank You! Worked for my F20 LCi, went from 6.5 to 10.25 .👍🏼

[@DAVIDEMARZANO-in5mj]

i'm trying to do the coding but it doesn't work from 6.5 to 10.25 like you did?

[@mr.eldiablo]

@@DAVIDEMARZANO-in5mj I had to code then switch it in the android head unit to 10.25 .