In order to use BFD: you must be driving at a high rate of speed and braking VERY hard. It’s called brake FORCE display, not brake SOFT display. 😉
@nuced25 жыл бұрын
Thic F30 Do you have the expert mode coding for the rear drls? On a G series?
@nuced25 жыл бұрын
...or just the coding? I’ve found that most menus are not available, due to the options being available in idrive. I want to see if I can code it be exert mode. Thanks.
@Domiricansobro4 жыл бұрын
Thic F30 hey I just got my BimmerCode app and it doesn’t show brake force display type any way you can help me get it?
@waynefullard424 жыл бұрын
Tried this with my 650i GC and it has brake force options but not he expert mode options you went thru in the video. Won’t work still, does anyone know how to access the brake force on these?
@SupertecRacing3 жыл бұрын
Does this work on non LCI or cars with the earlier model rear lights?
@twitch77715 жыл бұрын
Yesterday I finally got my adapter in the mail and coded my car. Your video about Bimmercode is what pushed me to go for it so thanks!
@ronniejanuszki5 жыл бұрын
It doesn't just look cool, it's much safer too. It usually just turns on the rear fog light when you hard brake for some reason, which REALLY doesn't catch your attention like rapid flashing does.
@boostedbavarian4 жыл бұрын
Rear fog lights? 🧐
@extraglutenplz37582 жыл бұрын
@@boostedbavarian yes F30 US spec have rear LED's in the taillights but are not active, you can activate them in coding, check his other videos
@komentatorius6912 күн бұрын
It is for safety reasons. The bfd.
@dailydriven9915 жыл бұрын
I was wondering why mine wasn’t flashing after the initial code. Went to the garage 2 min after I saw this and success. Expert mode ftw. Thanks!
@w1nnin5 жыл бұрын
Once again thank you for the video. I did the first part last year n wondered y it didn’t flash. I appreciate you being straight forward n detailed. 🙌🙌🙌Continue to produce content.
@lilerik585 жыл бұрын
I just got bimmercode. Keep these coming! Super helpful
@TheWrenchLab5 жыл бұрын
With all the distracted drivers, this is a must! 👍
@alananderson90723 жыл бұрын
How are flashing brakes lights gonna matter if the other driver isn't paying attention?
@BlitzSixx3 жыл бұрын
@@alananderson9072 Because a light that's flashing is more likely to catch their attention than one that lights up and stays on. Same reason your hazards blink, basically.
@alananderson90723 жыл бұрын
@@BlitzSixx i don't understand what you mean by catch their attention in this context...if the driver behind you isn't paying attention then why would it matter if the light is flashing or solid?
@BlitzSixx3 жыл бұрын
@@alananderson9072 well "not paying attention" doesn't mean they're in a coma, just zoned out a bit or not focusing on the road. Think about it this way, if you're staring off in the distance you can still vaguely notice what happens in your periphery or 'corner of your eye'. Well if something starts flashing, you are more likely to notice and turn to look. Also like when a cop is pulled over with their lights on at night, you see it from wayyy back on the highway, because flashing bright lights stand out a lot from whatever else is around it. Same idea with BFD, if they are just tired unfocused, hopefully the flashing will alert them that something important is happening and they zone back in lol
@alananderson90723 жыл бұрын
@@BlitzSixx first of all by definition a distracted driver is engaging in some activity that takes his attention from the road. We're talking about using a phone or trying to calm down a pet in the car. So if you're checking on your kids in the back seat it doesn't matter if the brake lights are flashing or solid And I hate to break this to you but you see all lights from way back at night, because it's night. All lights stands out in the darkness you just know its the police because they are red and blue So again you moved the goalposts to tired and unfocused when we're talking about distracted drivers.
@johnmcc49283 жыл бұрын
Best demonstration so far, straight to the point 👏.
@801russc5 жыл бұрын
Thanks Thic F30. The code below worked for me. Code For Brake Force Display FEM BODY ESS_AKTIVIERBARER_AUSGANG Change to bremslicht_blinkend Code For Outer Light Flashing REM 3062 MAPPING_BRAKEFORCED_L_OUTPUT change to bl Do the same for BRAKEFORCED_R_OUTPUT. Code for Flashing Rate REM 3064 LceConfiguration, 2B ESS BLINKFREQ 1 ESS BLINKFREQ 2 Change to 05 or other higher number
@rkwan675 жыл бұрын
Cool! Didn't know what brake force display meant before this video
@ross65185 жыл бұрын
Keep up the great work man. I love how you go into detail on on these small mods and coding because, just like the sequential blinkers, I hadn't even heard of this. Doing it soon. And I love how you are pumping out the content. Awesome channel man! I'll be grabbing some of your merch soon
4 жыл бұрын
You need the neon signs, lasers, and phosphorus flares codes because other drivers are playing with their phones, putting on makeup, eating a ham sandwich while on a conf call, and adjusting their Tesla's air conditioning rather than driving. Also, which menu are the anti-collision, defensive RPGs under?
@ThicWhips4 жыл бұрын
Rpgs are in the MAM: main artillery module
@SavageTurk145 жыл бұрын
Just saved me from buying an adapter that makes the brake lights blink 😂
@nofilter20912 жыл бұрын
for the life of me I couldn't figure out how to do that. YOU ARE THE MAN!
@pkedbysnow5 жыл бұрын
2 seconds after the video i went to my garage for this mod ❤
@lisi22164 жыл бұрын
Excellent video ... I own 2018 BMW 740i .... your video instruction is VERY helpful... please keep posting more videos so I can experience other features of my vehicle ... good job!
@kerrviin3 жыл бұрын
I just wanted to say thank you for all your bimmercode videos. I just got my f30 a few days ago and successfully input 95% of the codes you posted on your channel.
@ThicWhips3 жыл бұрын
🤙🏽
@Cat-wz3du5 жыл бұрын
All European Spec BMWs have this as a stock feature but they are only activated when you do a full force brake and they flash faster
@scottm25274 жыл бұрын
You should increase the speed setting in FEM or else the flash doesn’t start until you slow to 5km/hr. You want it to flash at higher speeds also if you brake hard.
@4089saad3 жыл бұрын
So unless the car slows down to 5km/h it won't work? Cus my break force lights don't come on
@jamesh1195 Жыл бұрын
Did you guys figure this out?
@komentatorius6912 күн бұрын
You have to brake hard for this to work.
@ewroldsen5 жыл бұрын
Awesome! Learn something new everyday 👍
@paulthompson80555 жыл бұрын
2016 M4 bimmercoding and everything was working fine except the actual option to turn BFD type on. I only have 2 selections in the BFD category instead of your 3. How do I work around this?
@alexthurgood925 жыл бұрын
Do the hazards still automatically turn on in emergency stops? I want to code this but I'm afraid it'll remove the default safety feature.
@kshitijgoswami78732 жыл бұрын
yes the hazards will still turn on automatically
@up2me2b5 жыл бұрын
I have an F10 and the sports + is not on the safe mode. Do you know the steps under the Expert Mode? I will really appreciate it.
@brunogiuffrida90704 жыл бұрын
As of July 2020, Do you still need to go into Expert Mode to do the Brake Force flashing mod, or has Bimmercode made this simple on just the main page? Thanks for your time.
@willstewart86144 жыл бұрын
Bruno Giuffrida I just coded it into my x3 without expert mode, it was on the main page.
@brunogiuffrida90704 жыл бұрын
@@willstewart8614 Thanks for the response! I also got a response from Stephan at Bimmercode support. He said that it is all in the main menu now, and that there is no need to go into Expert Mode. Gonna try it today.
@tonyliang903 жыл бұрын
do you know if this only flash 3 or 4 times then goes solid, or does it keep flashing until you come to a stop?
@Jonfocus035 жыл бұрын
I love these videos! So much great info in all of these!
@cashman24034 жыл бұрын
How do I get a cheat sheet for a f10? I tried activating break force display. But I don't have a rear com box to do the second step.
@jcarroyo2001814 жыл бұрын
Good coding videos quick question is there a way to code and activate the wheel calling feature cause when i clicked (the head picture in the wheel) nothing happens any suggestions?
@juandavidramirez27913 жыл бұрын
Which year is your car? I'm about to buy a bmw 328i sport line 2012, and i'd like to know if this beammercode works for that one. Amazing videos by the way!!!
@nigelharris1759 ай бұрын
Fantastic!!! Sorting this tonight 😉
@Specter_TF1415 жыл бұрын
Awesome man! Weird tho I didn’t have to go to expert mode to make it flash still thanks for the heads up man!
@ThicWhips5 жыл бұрын
For sure man, I’ve heard that it works for some without export mode and doesn’t for others. But this method will for sure work for everyone 👌🏽
@Specter_TF1415 жыл бұрын
Thic F30 really love your f30 man it’s super clean! It’s how I want mine at the end I show your car to my wife and say “I want mine like that” haha cheers mate!
@ZoeSwagCrew5 жыл бұрын
ThicF30 do you know what I need to do to get this to work on a 535 I get the 1st step but 2nd step is not there as Bimmercode don’t show rear module as a option
@stickman13095 жыл бұрын
Do u know if u can do this to just work for the middle light? Thanks and u just got a new sub👍🏻👍🏻
@TheJamesavatar3 жыл бұрын
Its been a year did you receive an answer?
@chasingthethrottle3 жыл бұрын
Instead of selecting L or R output just select “ MAPPING_BRAKEFORCED_M_OUTPUT” and select it to blink then leave the L an R at default setting . It will only blink for the middle light. Coded this for my F32 and it worked
@huntermoe263 жыл бұрын
So in order for lights to turn on do you need the abs to be engaged? So you'll literally see it pop up on the dash?
@jsJamesbond65 жыл бұрын
Lol I almost went and bought one of those sport light replacements
@qwksti4 жыл бұрын
Good video thanks for all the tips I went in and tried all the same things you did the only differences in bimmercode I didn’t have an option for brake force flashing active or un active I’m not sure if that is a model specific thing but I have a 2018 M4 competition and I don’t I don’t seem to have that option. Any ideas?
@Rondoo295 жыл бұрын
Another dope video!
@se21033 жыл бұрын
Good video, from the “Hipster” 🤣
@ThicWhips3 жыл бұрын
Thanks
@DJRanoia5 жыл бұрын
Good idea still putting it on at the end also. I would say be aware of a cop is behind you and it blinks, they could pull you over for faulty brake lights aka reason to pull you over so be aware of this and brake car slowly if one shows up behind you.
@larinoriani5 жыл бұрын
Lol
@MatthewMaok5 жыл бұрын
nah no they won't. Otherwise they'd be pulling over Hyundais and Kias left and right that seem to do this from factory, could be aftermarket but I doubt those owners would be modifying to an extent like so.
@quinton3x9502 жыл бұрын
You think this would work on my x3 e83
@karlmartyn93165 жыл бұрын
Another great video keep them coming 👍
@Pcola74 Жыл бұрын
i have a 2015 320i followed exactly but fails to flash don't know if you will see this since its 4 years old
@sethadamson57948 ай бұрын
I hope you help me I have an F48 2017 with non LED tail lights and Want to install the LED ones, I tried pluggin a friends LED tail lamp and It wont light up , Ii is possible to make them work with coding?
@itsyanielxo5 жыл бұрын
But doesn’t the F30 come with an adaptive brake force stock? My car has it and it’s a 335i. The inner bulbs light up.
@matthewsprinkle30975 жыл бұрын
Coded everything properly but couldn't seem to get it to work, any thoughts on what the issue could be? Does it only work on the LCI tails?
@blackopsguy975 жыл бұрын
I am having the same issue. All the codings are the same as in the video , with the same method. And it fails to work for me.
@matthewsprinkle30975 жыл бұрын
@@blackopsguy97wish i new the solution :/
@matthewsprinkle30975 жыл бұрын
@illestAl nope. At this point I think it only works on the LCI taillight, not the stock ones.
@ThicWhips5 жыл бұрын
It 100% works on the stock lights.
@dalmo19625 жыл бұрын
I don't have the Brake Force display type option? Is there Any other Options for this to work on my car?
@@levski65 To be clear, this setting you are referring to is under Expert mode within FEM.
@wassimnandoo83422 жыл бұрын
Do you know if these codes work with Pre Lci models? I have a pre LCI F32. Really informative video though! Great job dude!
@tfriendknox15 жыл бұрын
This video got me to hit the subscribe button man. I never sign up but you deserve it seeing as I watch most of your coding videos. Now I just have to find out why I can get the rolls Royce sound and the splash screen animation to work on my 2011 f10.
@ThicWhips5 жыл бұрын
Some of the models don’t work on all cars. There are quite a few things I cannot code on my car etc
@scottbraganza5 жыл бұрын
Sick! Try this tomorrow!
@bmwx7upgrade559 Жыл бұрын
I have a question I have a I have the latest update on the bimmer code and I have a bmw x7 x40i 2020 can I do the same because I don’t see on the new update :-(
@luismontano25322 жыл бұрын
3062 maping works on mi 320i 2018 too? Or i have to use another one (talking about the part when you go to expert mode). Thanks
@Most_Dope3055 жыл бұрын
Will this work for the f10?
@miguelflores-cc2ox5 жыл бұрын
I wondering why my BimmerCode does not have the option of break force display type?
@jon2xmanuel5 жыл бұрын
Me too 😟
@ezv_475 жыл бұрын
What time of 3 series is that, I have a 2015 bmw 328i and was wondering what engine you have in yours
@user-omgbaozi2 жыл бұрын
Wondering how’s this flash looks on Led rain light diffuser
@mrleba185 жыл бұрын
For some reason do not have the option shown to switch between flashing and area enlargement. It is by default set to flashing without the option to switch between the two. I have coded the rear module as instructed, but still no luck. Any thoughts?
@ruffluv3 жыл бұрын
I have the exact model of BMW, bimmercode and adapter. Did the exact same thing that you did but my tail lights are not flashing.
@ruqqo5 жыл бұрын
Does your car have be off while doing all the coding? And then finally when you're done you disconnect everything and turn your car on and whalaa? It's done? Thank you mate and dope video
@12bravo1sttocross74 жыл бұрын
I did this and it only does the left and right brake for me. Should I do brake force middle if that’s even an option? I believe I saw that
@mannyinnyc5 жыл бұрын
3rd break light is bundled with left and right output?
@ThicWhips5 жыл бұрын
It is
@mannyinnyc5 жыл бұрын
@@ThicWhips sweet ty will do this once my adapter gets here Sunday. Bimmercode should give you a creator code kinda like fortnite does lol
@biggredd92574 жыл бұрын
Does this only work on 2015 or newer...ive coded other stuff but not sure if the flashing brake light works
@SilkDoctr5 жыл бұрын
Yo I believe my F30 has the active blind spot option and the lane departure option because I can kinda see it in the little screen next to the speedometer do you think you can do a vid on that ?
@blackopsguy975 жыл бұрын
Tino Z unless you have the sensors , or the controls , all the screens were assembled the same. You’ll be able to tell use a vin decoder online or you’ll have the toggle on and off options on the left side of your car (US)
@SilkDoctr5 жыл бұрын
That’s what I was thinking About the screens but thanks !
@blackopsguy975 жыл бұрын
I’ve been trying to get mine to work , following the video exactly but mine seems to not work. Any suggestions??
@ThicWhips5 жыл бұрын
For bfd you have to be driving fast and braking hard. That is likely why you guys are not seeing results. 🤷🏽♂️
@ThicWhips5 жыл бұрын
Brake harder.
@j-ro29665 жыл бұрын
I tried this on my 2018 F 32 but their was no category for brake force display type . Everything else was as in your video. Any ideas? if none, do you know how to contact the apps designer? Thanks.
@up2me2b5 жыл бұрын
And thanks for the video. I ask you for it las time. Thanks a lot. You are great.
@michealsimpson13025 жыл бұрын
I peeped the DDE sweater Dope AF
@depaolibio2 жыл бұрын
Cool! I found this video while looking for a way to adjust my actual braking power. BMW prioritize comfort and has this 'adaptive breaking' which prevents the brakes to be "too grabby", which really sucks. I spec'd the M440i with the 378mm discs from the factory and the i4.M50 (heavier car!) with standard Msport brakes (348mm) braked better. There must be a way to move such "adaptive" into a more "direct" braking (which is manually available to the driver in the M4). Would you know a way/tune/adjust that is done electronically (no hardware) to minimize electronic intervention of the braking response (i.e., makes braking power delivery more direct to pedal input)???! Thank you!!!
@depaolibio2 жыл бұрын
374mm disc!!
@nocreaselucas88105 жыл бұрын
TF30, What is the Best first mod for the beemer? I am a fellow f30 328 owner :)
@Thakorrupt15 жыл бұрын
Is there anyway to code this feature without going into the REM? My X1 doesn't have that module in Bimmercode.
@radnewiliw13302 жыл бұрын
Hi @Thic Whips, does it work for LED rear lights on f30 2014 ?
@MatthewBlackRed25 жыл бұрын
Does the brake force display only work when the headlights are on too?
@michaelvanna89823 жыл бұрын
Thanks a bunch👍🙂
@francescocolombo814 жыл бұрын
Hi mate, that is very cool 😎 I have a question for you about my car I have not the TPMS sensors and I would like to activate flat monitoring with bimmercode so could you tell me how could I do that please? And keep going to make a video 👍👍
@jerry1999a5 жыл бұрын
Hi Thic, I have a 2017 BMW X5 and I am trying to code Brake force display, I did the first step but I cannot see the second step the Rear electronic module, any help thanks
@fxbrus74335 жыл бұрын
Hi friend, man I'm watching all your videos and doing all the tips. Awesome, incredible, I'm already install bluetooth music, retro mirror, Sport + and everything you have in your videos. Unfortunately the break force display fast function does not appear on my Bimmer. I can not choose the FLASHING option. Any tips? Thanks brother
@Y0UTUBEADMIN5 жыл бұрын
Hey man love the channel...what wheels are these? I didn't see them in the equipment list.
@ThicWhips5 жыл бұрын
MY F30 BMW WHEEL SETUP AVANT GARDE M510 REVIEW kzbin.info/www/bejne/p4C1eHmvr9iJhq8
@Y0UTUBEADMIN5 жыл бұрын
@@ThicWhips Thanks a million! Greetings from Ireland!!!
@Pitarucea4 жыл бұрын
hi, does this tutorial work only for led lights? or those with bulbs in 2014
@rixride20115 жыл бұрын
Will this work with pr-lci tail lights? Your videos are awesome! Love the detailed information! Thanks!
@partyhaad3 жыл бұрын
Just curious, why not use OBDLink CX Bluetooth?
@jg_media95 жыл бұрын
Not gonna lie bro this is my favorite coding video you’ve done. Someone just rear ended me in my e90 so I’m deff trying to figure out if this same process would work with my f22 m235i. Haven’t gone into expert mode at all yet. Any advice?
@ThicWhips5 жыл бұрын
Give it a shot
@jg_media95 жыл бұрын
@@ThicWhips well gave it a shot and for some reason when i'm in the "REM" and make my attempt to code, it goes through and says it coded ok but it doesn't actually reset the ECU. you ever have this happen to you?!
@ThicWhips5 жыл бұрын
I have not
@jg_media95 жыл бұрын
Thic F30 true trueee thanks for the response my friend. I’ll figure it out
@alexanderzalmanov1873 Жыл бұрын
Would you be so kind to instruct how to program convenient excess option, move driver's seat back when shot down the engine
@TJohnson540i4 жыл бұрын
I got a Yellow explanation point after coding is this normal? Will it go away after driving awhile?
@thepunisher4785 жыл бұрын
Love the video but I think on the bimmercode update it doesn't have brake Force display type so I can't get the brake Force lights to flash after doing everything you showed except for that one parameter that is not on bimmercode anymore any ideas?
Can't get the 2017 X3 to work. I can't find it in the menu.
@Jordan31t3 жыл бұрын
Did you try this for the supra? It would be super helpful!
@Owens23073 жыл бұрын
Hey man nice car do you know if this works on a 2011 f10
@raphaelwu19885 жыл бұрын
Thanks for such great video, the menu options in my bimmercode app doesn't have the "brake force display type" option, my car is a F30, anyone knows how to get this work?
@paulfitzpatrick74245 жыл бұрын
Hi there would coding be the same for my BMW f10 or would the codes be different...
@russellwilliams39544 жыл бұрын
Am i assuming this only works with lci tail lights right?🤔
@G80_Cory5 жыл бұрын
Do you still use this code feature on your car ?
@craftwanderer88022 жыл бұрын
can you what angel eyes brightness change?
@Y0UTUBEADMIN5 жыл бұрын
what wax/paint sealant you rockin?
@ThicWhips5 жыл бұрын
Chemical guys, butter wax and clay blocking with clay luber 👌🏽
@SinFerDays5 жыл бұрын
I was just doing this on my F30 and now I have an ANNOYING bzzzzz sound every time I open & close my door. Help lol how do I get rid of this?
@ThicWhips5 жыл бұрын
Kill the bee that flew into your car
@SinFerDays5 жыл бұрын
Thic F30 I wish it was a bee lol but in all honesty I think it’s coming from the FR door speaker, I just received my vgate yesterday so since the morning I’ve been checking out what I can code, and I think something triggered this buzzing thing
@ThicWhips5 жыл бұрын
I would use your backup coding to stock. If the buzzing persists it’s not related to coding.
@anthonyperez73494 жыл бұрын
Hello there do you think this works on 5 series
@elijahfrancis25205 жыл бұрын
Great vid however my bimmercode app has all the options available except "brake force display type" within the fem, so I can't even select flash. Any idea where I can find it?
@bezaka024 жыл бұрын
I have the same issue. Did you worked it out?
@ahmetozcan9784 жыл бұрын
Did you found brake force display type?
@NikkoCruz13 жыл бұрын
Do you need lci taillights?
@CrashOut328i2 жыл бұрын
will this work on a 2011 328i xdrive?
@scottstewart1405 жыл бұрын
I had to code in the Footwell Module and don’t see the expert mode 3062. What now?