BMW g80 m3 ZF8hp76 transmission swap into m340

Contact Blake Roscoe on Instagram at www.instagram....
Or email Blake at [e-mail]
And Mike Ball on Instagram at www.instagram....
These are the 2 guys that know exactly what they’re doing for the 8hp76 swap!
***like, share, and subscribe to our channel**^
Personal Instagram page, give it a follow
www.instagram....

[@Eddy-09]

6:00 everyone catch that? B58 is a better engine than S58 😎 “goes faster and lasts a long time” B58 FTW!! Jazz, can we see a new BMW record with the B58 again soon?

[@michellem7560]

Yes finally no more garret turbo Precision FTW let’s get it to 1500hp eventually and send it or whatever the limits are for the b58 in 3.0 good luck I look forward to the project progressing

[@ProfilineDetail]

Garrett betta tho

[@michellem7560]

@ who told u that

[@BarsDept]

YO MIKEYY YALL ONTO SOMETHING yall gotta get this for the community b58 vs the world

[@loudaccord]

The ability to code like that is impressive

[@MikeyTuned]

@@loudaccord 2025 for you lol

[@santimejiam240]

Excelente contenido Jass, gracias por compartir con la comunidad del B58 todo está información, muy útil!

[@MikeyTuned]

@@santimejiam240 para aquí estamos bro! Para ayudar a la comunidad y enseñar a otros

[@Adonis-qj1nq]

This looks promising but will it be possible with newer cars that have idrive 8.5 and limited coding possibilities?

[@hectorramirez8516]

Crazy numbers good job

[@MikeyTuned]

@@hectorramirez8516 thank you!

[@y00h000]

Can we get an X drive Supra pls lol What’s with all the non stop BMW and S58 content I thought Mikey was a Supra hero 😂

[@MikeyTuned]

@@y00h000 pointless to make a Supra xdrive

[@y00h000]

Just do something cool with the Supra lol

[@MikeyTuned]

@ that car is not for the “cool factor”, it’s for being competitive at events

[@laworder2652]

I have an 8hp76 that i want to install into the mkv supra. I bought the 8hp76 from a rwd g80 m3 with like only 3k km on it. I'm currently pushing around 700whp and i felt my stock 8hp51 slip 3-4 a couple times and 5-6....idk. i want to do this this year. Id like to get into contact with these guys.

[@alexxkolev]

Great video! Are you from IL? Hope to see you at some car meets this spring/summer. I might go your route with my Supra. Hopefully they have this kit ready to go soon. 🙌🏻

[@MikeyTuned]

@@alexxkolev I live in Florida

[@alessioluppino4312]

is more or less a pnp swap? and i suppose you have at least a stage 1 on the 76 correct? because at the moment i have stage 0 (ex stage 1 trans) but for future upgrade this will be a huge improvmente eventually. kind regards and thanks sir :D

[@AGBoost]

Have you and Mikey been able to mess with BM3 Rev 2 at all? Wondering if it’s worth the wait rather than switching to MHD+ or Ecutek for PI/Reflex integration

[@MikeyTuned]

BM3 does not want to give us the rev2 board to test 🤷🏽‍♂️ but EcuTek and MHD+ is the move for sure

[@Melvin-01]

​@MikeyTuned good to know. Are yall tuning on mhd yet though?

[@MikeyTuned]

@ yes sir we are doing all 3 tuning platforms

[@johnstape4488]

Why didn't you just start with g generation XDrive m3 to begin with?

[@MikeyTuned]

@@johnstape4488 cause b58 is better and prefer the looks of the m340 front end

[@johnstape4488]

@MikeyTuned is b58 better because more support for it at the ultra high end or its literally mechanically superior for max hp? + fair enough thought it would have been a ton easier is all

[@MikeyTuned]

@@johnstape4488 no, the bore and stroke combo makes the b58 better than the s58

[@johnstape4488]

@@MikeyTuned I see, thanks for response!

[@spencersinger3209]

This is using the transfer case and rear diff from the G80?

[@MikeyTuned]

@@spencersinger3209 transfer case is the same across all gen2’s. Rear and front diff chance on gen2’s and s58’s. I only did a trans swap

[@spencersinger3209]

@ and the g80 diffs are beefer I’m assuming?

[@MikeyTuned]

@ only the rear differential. Front differential is same as gen2’s, but with a different ratio

[@originyl2505]

wondering if the zf8hp76 RWD version is also a direct swap for RWD g20s

[@MikeyTuned]

@@originyl2505 yes sir it is

[@mukask520]

Hi bro What about those just wanting to have more tq and don’t really have the money to build motor is this an option too?

[@MikeyTuned]

@@mukask520 it’s gonna be just as expensive to do the swap and coding as it is to build your stock transmission

[@noelvaldivie9140]

Hi jazz, did you have to put a g80 driveshaft or the same one you used perviously works?

[@MikeyTuned]

@@noelvaldivie9140 same

[@christianarrieta001]

I wonder if the transfer case from the g80 will fit the g20

[@MikeyTuned]

@@christianarrieta001 yes sir, they’re identical

[@blackhammerftw1960]

@@MikeyTunedidentical as in dimension or internals too?

[@Cal-oh2kc]

Why do you rpefer an ice box over something like an interchiller? wouldnt an interchiller be more consistent and easier to use?

[@Cal-oh2kc]

prefer*

[@FatalNukeZ]

Can this be done to the gen 1 b58 would the cost equal out to a built 8hp50?

[@MikeyTuned]

@@FatalNukeZ building your stock trans is a cheaper option

[@n0t_fast]

for gen1 you can swap to diesel 8hp70 and will be way cheaper.

[@chjks31]

Your supra also on 8hp76 transmission?

[@MikeyTuned]

@@chjks31 no sir, stock trans

[@CBREEZY6787]

What hpfp are you on with that much power?

[@MikeyTuned]

@@CBREEZY6787 we do not touch the factory DI

[@CBREEZY6787]

@MikeyTuned really? So question for you, if I wanted to make about 5-600hp in the a90 I don't have to change the hpfp? I'm guessing just the lpfp? Or the supra is different from your car?

[@MikeyTuned]

@ it’s identical. We never touch the factory DI system

[@CBREEZY6787]

@@MikeyTuned interesting

[@triz1hunna151]

@@MikeyTunedno dorch or pricison lpfp?

[@CBREEZY6787]

Would it work with the a90?

[@MikeyTuned]

@@CBREEZY6787 yes sir, we have done it

[@CBREEZY6787]

@MikeyTuned no videos?

[@MikeyTuned]

@@CBREEZY6787 it’s the same as what I showed in this video LOL I’m not gonna make 2 of the same videos