BMW M57 DIESEL GLOW PLUG AND GLOW PLUG MODULE REPLACEMENT 335D

  Рет қаралды 49,228

Woody’s Workshop

Woody’s Workshop

Күн бұрын

How to replace the glow plugs and glow plug control module on a BMW with the M57 diesel engine. 335d or xdrive35d. e90/e70.

Пікірлер: 64
@user-xj4jh6ji2f
@user-xj4jh6ji2f 10 ай бұрын
taking the impact to the old glow plugs gave me chills up my spine
@BusterNorway
@BusterNorway Жыл бұрын
Glow plug and impact gun,,that,s brave...
@LeedsHypnotherapist
@LeedsHypnotherapist Жыл бұрын
Very brave!!
@eugencristea1585
@eugencristea1585 10 ай бұрын
Reckless, you mean.
@oveberg3892
@oveberg3892 8 ай бұрын
I have a 535d (M57 engine) that was difficult to start when it was around zero degrees celsius or colder. After i changed glow plugs and glow plug module, my car started easily in minus 10 degrees celsius. When diesel cars have problems starting when it is cold, it is very common that the glow plugs and/or glow plug module are defective. The smartest thing is to change both the glow plugs and the glow plug module at the same time when you first have off the intake manifold.
@jamesogara2219
@jamesogara2219 Жыл бұрын
Just came back to view this again prior to pulling the intake manifold. Great video.
@dangti6
@dangti6 3 жыл бұрын
Great video! I replaced all mine yesterday and the module. I was watching this on the off chance the little bracket got mentioned for the acoustic cover. I couldn’t for the life of me figure out where it went! Thanks for being very detailed!!
@Bagged.e38
@Bagged.e38 Жыл бұрын
How long does it take more less to do it ?
@dangti6
@dangti6 Жыл бұрын
@@Bagged.e38 It’s taking the inlet off that takes up most of the time. Replacing the module connector plugs is very fiddly too. Around 2 hours if all goes smoothly
@DavidRAlc
@DavidRAlc 2 жыл бұрын
Fantastic video mate, thanks for sharing your knowledge, very helpful.
@danielstrom2686
@danielstrom2686 2 жыл бұрын
Great video. Now It´s my time to replace mine. Like the long tools you got there.
@Way2EasyDIY
@Way2EasyDIY 2 жыл бұрын
Only video Ive seen with no dislikes. Nice job
@jekabsruts3023
@jekabsruts3023 Жыл бұрын
Thank you king, keep up the good work.
@joew2377
@joew2377 9 ай бұрын
Thanks for the detailed video! Do you happen to have a “how to” video for the swirl flap delete? I would love to see it if you do.
@wesikes
@wesikes Жыл бұрын
13:58 Excellent video thank you! I removed the coolant hose from the head (3 10mm bolts) and tied it out if the way then unbolted the module, removed the front round plug first, and the last plug was easily accessible with everything else out of the way.
@percypig3358
@percypig3358 Жыл бұрын
was it easy to bleed the cooling system when you put it back together?
@wesikes
@wesikes Жыл бұрын
@@percypig3358 Didn’t have to do anything special. I let the car warm up with the cap off and once it was warm enough for the thermostat to open it purged all the air out. Topped off coolant and didn’t have to touch it again. Unlike some of the Hondas I’ve worked on in the past, there’s no air bleed screw that I’m aware of. Dealership wanted $2200 to do this and I have no idea why, it was a very easy job, just be sure to look up torque specs for the intake. I’d tell you but I don’t recall what they were now.
@hague88
@hague88 8 ай бұрын
How much coolant did you lose?
@wesikes
@wesikes 8 ай бұрын
@@hague88 No more than 0.5L
@moussdt77
@moussdt77 Жыл бұрын
Très bonne video et très bien expliqué 👍👍👍👍merci thank you
@kidda74
@kidda74 Жыл бұрын
Ah I was wondering what was missing there, I left the actuator on the cover and just had the egr mapped out without replacing it with a delete kid. That looks real tidy though!
@jaimeabuan7742
@jaimeabuan7742 2 жыл бұрын
I have a 2017 X5 xdrive 35 d. would the instruction be the same? Thinking of doing it myself instead of paying $1400 to the dealer. Your video is excellent and detailed.
@matttrut5955
@matttrut5955 Жыл бұрын
The oem glow plugs and relay should be Beru not Bosch. The glow plugs need to be functioning properly otherwise the car won’t regenerate and you end up with dpf light coming on. Good vid tho!!👍🏽
@eddy45686
@eddy45686 Жыл бұрын
Don’t need glow plugs to regenerate
@mounseaoutdooryw1993
@mounseaoutdooryw1993 2 жыл бұрын
Great video! I’m just planning to replace mine, subscribed! Did u disconnect the battery before doing the whole job?
@lomparti
@lomparti 2 жыл бұрын
I ended up disconnecting the coolant hose going to the block thats just above the module.
@osamadavid9727
@osamadavid9727 7 ай бұрын
How often are you supposed to this as maintenance ? I bought mines like a year and a half ago but I was thinking if I should change them now since the car is tuned
@Muggrug
@Muggrug 3 жыл бұрын
Good video Wood! Hope everything is well.
@bombakdik
@bombakdik 3 жыл бұрын
Very nice video. Well explained. What electric screwdriver are you using?
@MrTarlamisaj
@MrTarlamisaj 3 жыл бұрын
Nice video! Thanks
@jamesogara2219
@jamesogara2219 3 жыл бұрын
Super cool thanks!
@oldak8647
@oldak8647 2 жыл бұрын
very nice video thx
@christianshi
@christianshi 3 жыл бұрын
Hi @Woody's Workshop , Love your video, I hope there are some torque specs specified. If you happen to have them, could you share them here? Thank you. Also, where did you do your delete? I want to get it done on mine as well.
@meriss1901
@meriss1901 3 жыл бұрын
multiple tuners have gotten rid of their delete tunes. you will need dpf delete downpipe, egr delete and swirl flap delete block offs. Tunemyeuro may still sell these. JR still offers delete tunes. seems complicated but pretty easy if you're mechanically inclined.
@nickprostizenovski6948
@nickprostizenovski6948 2 жыл бұрын
My glow plug module has a wire dangling down on the chazzy the plug gose to the module thought idk if this a Earth on the body or its a power wire?? If u can shear some idea thanks
@ollie-kc6nj
@ollie-kc6nj Жыл бұрын
Does the head need to come off if you snap a glow plug?
@terwarren
@terwarren Жыл бұрын
Who do you send the intake manifold to for sonic cleaning? How would I find a shop in the north Houston area?
@mikewilliams4947
@mikewilliams4947 3 жыл бұрын
I’m in the Caribbean. Looking at buying another 335d. It has misfire codes on 2 and 4. Even after engine is warmed up it still idles like doo doo.
@benjaminplackemeier1705
@benjaminplackemeier1705 3 жыл бұрын
Could be the injectors. With BMW there is no simply replacing plug and play. You have to program them to the car.
@mikewilliams4947
@mikewilliams4947 3 жыл бұрын
@@benjaminplackemeier1705 thank you. I also understand that the glow plugs can do it. If they aren’t torqued down to around 20 NM they can cause issues. I’m on it today. Cylinder 1 was loose. The rest clicked at 20. It’s running better. I’m doing the valve cover today and probably taking the injectors to my local Bosch diesel overhauler guys. They can test and clean for $80. Worth it IMO.
@e60tube90
@e60tube90 2 жыл бұрын
glowplug module is toast
@seb4298
@seb4298 3 жыл бұрын
Done my one not long time ago The worst parts is cleaning intake manifold
@Dave-tz9zx
@Dave-tz9zx 3 жыл бұрын
If one is replacing the 6 glow plugs, is it highly recommended to change the module too? I just have cylinder 5 failing.
@colecole5314
@colecole5314 3 жыл бұрын
Yes, bad glow plugs cause the module to fail
@insideridin1376
@insideridin1376 2 жыл бұрын
@@colecole5314 thats not true.
@daliborjurjevic1979
@daliborjurjevic1979 2 жыл бұрын
@@insideridin1376 yes it is true
@insideridin1376
@insideridin1376 2 жыл бұрын
@@daliborjurjevic1979 how?
@habat4ever
@habat4ever 3 жыл бұрын
Very interesting video, thanks. My BMW Dealer says that I need to replace my glow plug control module and Carly Adapter shows all 6 glow plugs in fail mode due to this. However, when I have asked my dealer to also replace the glow plugs, they responded that they will replace the ones they can remove but leave the others in place if cannot be removed. How strange is that? Does this mean that in few cases, glow plugs cannot be removed? My car is a BMW 335D E92 from 2008 with a 155 000 km mileage and frankly speaking, I had never had any issue with the pre-heating except since I am living in Sweden and temperatures were approaching -15, -20 deg C and the car was very hard to start, Now that temperatures are a bit better between -5 and +5 deg C, the car starts OK but coughs a little bit for 5-10 seconds or so once starting... do you feel that only the glow plug control module can be responsible for this?
@dimitarkamnarovski9653
@dimitarkamnarovski9653 3 жыл бұрын
Yes the glow plug module cn definitely be responsible for this. Also the glow plugs are very prone to snapping and if they snap they get stuck in the head of your engine. Maybe BMW doesn't want to run the risk of breaking them and having to extract them out of your engine because it is a very difficult and annoying procedure that includes drilling and stuff like that. I would replace the glow plug module first, clear the faultcodes, and then see if it's better. If it's not better you will still need to change the plugs. If you want to tackle the plug yourself you need to warm up the engine, shut it off, then take the intake manifold off, soak the plugs in wd40 for at least 2 hours and then veeeerrryyyy slowly cracking them lose whit a spray of wd40 and very slowly crack them cm by cm when turning so very slowly. Hope this answers your question and informs you a bit extra :)
@erico6117
@erico6117 3 жыл бұрын
@@dimitarkamnarovski9653 just curious, my scan told me that #2 cylinder plug is bad. So should I replace the module first and see if it because of the module or just replaced the #2 and the module ? And do I need to replace all glow plugs if only #2 is bad ?
@dimitarkamnarovski9653
@dimitarkamnarovski9653 3 жыл бұрын
@@erico6117 if you are going to replace a glow plug, it is best to replace them all at once. When replacing glow plugs it is never a bad idea to replace the moduoe as well. You could replace the plugs first and erase the codes. I mean if that works, it works. But if the fault comes back you should replace the module as well.
@erico6117
@erico6117 3 жыл бұрын
Dimitar, the dealership confirmed that none of the plugs are actually bad. But the plugs module itself is faulty and now along with the throttle body valve. Both needs to be replaced. They also mentioned that my battery is bad and also needs to be replaced. I wonder if it’s because of the low voltage battery level that it’s throwing out faulty module and the throttle body valve. The car shifts fine, no power loss, no studder, nothing. I’ve drove the car hard with the CEL on for a week before I took it to the dealership. What do you think ? Could it be my low voltage battery throwing out those faults ?
@dimitarkamnarovski9653
@dimitarkamnarovski9653 3 жыл бұрын
@@erico6117 it could be that because of your low battery voltage your glow plug module has failed but it will still need replacement as well as your battery. About the throttle body valve i dont know what to say no experience with that one. I hope after you change your battery and glow plug module, your throttle body will work normal as well.
@TheBrickLot
@TheBrickLot 3 жыл бұрын
How long did it take overall?
@seb4298
@seb4298 3 жыл бұрын
To do it properly around 3 hours working on the car Cleaning manifold takes ages lots of brake cleaner and bottle brushes I'd soaked my one and left overnight
@tafadefi6738
@tafadefi6738 Жыл бұрын
but why also MODULE CHANGE?
@Dave-tz9zx
@Dave-tz9zx 3 жыл бұрын
Where are you located? I would really like to hire you to work on my delete and glow plugs replacement.
@woodysworkshop816
@woodysworkshop816 3 жыл бұрын
I I’m in Kansas City Missouri
@Dave-tz9zx
@Dave-tz9zx 3 жыл бұрын
@@woodysworkshop816 ok. Way to far from me. Thanks for good video.
@erico6117
@erico6117 3 жыл бұрын
@@woodysworkshop816 hey woody. I’ll be interested in doing full delete on mine as well glow plugs replacement. Just curious how much would you charge ? Feel free to reach back to me woody @ coffeeandcurfews@yahoo.com Thanks 🙏
@MrSnookerballs
@MrSnookerballs 8 ай бұрын
why would you have to replace the module.
@ChiefOL78
@ChiefOL78 8 ай бұрын
Module is a very common failure item. It's recommended to change plugs with module at once.
@smokingtires5
@smokingtires5 3 ай бұрын
It baffles me when someone goes to all the trouble of making a video like this and doesn’t even bother with proper torque specs.
@adamofarrell5106
@adamofarrell5106 22 күн бұрын
Clock wise until you hear a crack and then back a quarter turn
BMW M57: Diesel's Best Kept Secret
10:38
Dust Runners Automotive Journal
Рет қаралды 377 М.
ДОКАЗАЛ ЧТО НЕ КАБЛУК #shorts
00:30
Паша Осадчий
Рет қаралды 1,7 МЛН
SCHOOLBOY. Мама флексит 🫣👩🏻
00:41
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 6 МЛН
小丑妹妹插队被妈妈教训!#小丑#路飞#家庭#搞笑
00:12
家庭搞笑日记
Рет қаралды 29 МЛН
Modus males sekolah
00:14
fitrop
Рет қаралды 15 МЛН
335d Glow Plugs + Glow Plug Module Replacement / BMW M57 Heater Plug Fault
22:32
Stupid Bloke Stupid Videos
Рет қаралды 7 М.
BMW m57 glow plug change
6:56
EiAlGarage
Рет қаралды 18 М.
How To Remove Glow Plugs WITHOUT Snapping Them
11:08
George Austers
Рет қаралды 919 М.
BMW 335D M57N2 Glow Plug Module Replacment Guide
6:15
Ben
Рет қаралды 116 М.
How to easily change 335d glow plug controller
6:46
MMD Performance
Рет қаралды 61 М.
Bmw N57 e92 330d glow plug module relay
7:56
Ramzz09
Рет қаралды 16 М.
ДОКАЗАЛ ЧТО НЕ КАБЛУК #shorts
00:30
Паша Осадчий
Рет қаралды 1,7 МЛН