BMW MOTOSCAN APP ⚠️ UNLOCK A HIDDEN MENU..!! ⚠️ The Old Mechanic shows how to do that.✨

[@NunoMPS46]

Thank you! Didn't know this was possible.

[@TheOldMechanic]

Glad I could help!

[@williamgrazioli5754]

Complimenti dall'Italia , bravo .

[@cesarmeloni7672]

I'm going to put it into practice with my GS right now. thanks again

[@jmileshc]

Is it possible to retrofit an RDU - TPMS to a bike without? Say an F800. So fit a used RDU, wheel sensors then re-code to Active via motoscan?

[@kprice399]

Thx. Great find . Didn’t know it was there

[@newroads9787]

I wonder is it possible to have you current speed displayed in the information screen.would be good if you could as the Speedo can be difficult to see.

[@petrsyka]

Good video. Thank you. Is any temp. sensor needed to send signal to dashboard? Or how is the temp read from the tires? Please advice. Thx. Petr

[@TheOldMechanic]

Hi Peter, that temp sensor is already in these tps sensors, you just have to unlock that with the motoscan app 😉

[@lookandhear]

Hi there The Old Mechanic! That is interesting, I did not know that tyre temperature was a built in but disabled feature! is the GS911 also capable of doing that? J

[@TheOldMechanic]

I don't think so..

[@gordonhenderson1708]

Hello again! I finished watching "The Ultimate Showdown" video and my question below is answered, I think. I'm happy to have ordered the UniCar Scan interface. It's on it's way. Thanks for your videos! They are full of valuable information for us do it ourselfers. Cheers from British Columbia, Canada.

[@TheOldMechanic]

Thanks Gordon, and spread the word, my channel..😉👍🏍

[@frienkywijaya1114]

phone number???

[@androidemulator6952]

Another super-useful video !!- Thanks T.O.M. ;)

[@TheOldMechanic]

Glad you enjoyed it! 👊🏻👍🏻😉

[@535832]

Hi I just received the obd2 Bluetooth reader and connector for my birthday and downloaded the app and have been following your tutorials .can you tell me if it is possible to regulate the fuel gauge on a 2011 gsa there seems to be a function for it but does the fuel gauge need to be taken out of the tank . Thanks again for your video program

[@threehanded8853]

Hello OM, I am confused, will my obd2 MX+ not work fully with Moto scan? Or is that one ok too for long code instructions. - from Texas!

[@Tony-hr5ib]

Excellent stuff thank you for all your videos.

[@TheOldMechanic]

Your welcome Tony 👍🏍

[@williampadilla7976]

I had a question for you the data plug that you recommend here on your list it is from China I just received it and I have had some issues with the unit staying connected to the 2100th is that because of this cable

[@TheOldMechanic]

Hi the link I placed in the description is by Amazon, the UnicarScan UCSI-2100.. thats not a Chinese copy

[@HorizonsUnlimited]

Interesting, but how does it take a temperature reading? Does it use a sensor and since air is a very slow way of transmitting anything, temperature indications will lag. Also if it was 12.5°C in the garage, why were the tire temperatures reading only 9°C?

[@535832]

Hi do you have a link for the tpms wake up device from China Thanks ,enjoying you channel

[@newroads9787]

Great video,Have a 2012 R1200Rt I wonder is there and more information functions that can be enabled?

[@informyourself4074]

Great Video, thanks for sharing 👍

[@GHART47]

Hey boss man, 2012 R1200 GSA, the shop man says mine doesn't have the wheel sensors, or might not have the software for this feature. Is that what the moto scan do? Program the bikes software? Parts guy says there a 4 options for my bike, but if the bike isn't programed it won't work. Your thoughts?

[@darraghnolan667]

Hi I have a gs1200 2004 year but lately the digital display in fadeing but when I turn on the bike everything is ok until I rev up the bike . I would be delighted with some help

[@chandu_mangalasseril]

I have a bike with MPH as default, can I change it to Kilometers? Can you do a video please 🙏

[@leewhittle4340]

Any chance of a video fitting genuine tpms to a f800gsa with no alarm or tps fitted please old mechanic 😊🍻

[@gordonhenderson1708]

Hello Old Mechanic. I'm enjoying learning the Motoscan App thanks to your videos. I have a question, you use the UniCar Scan module, which I have ordered. I've noticed other folks are using the OBD Link LX. Do you know if one is any better than the other?

[@MrBestvirginia]

unicar scan is perfectly fine. Mostly Link LX is quite a lot more expensive. Furthermore, I think it's the same guy (obviously he doesn't build the module itself) for the App and the module so they're always 100% compatible ;)

[@b.j.photoart3424]

Hallo, Heb een 1200rt en sinds kort een 1300gt...telkens ik iets aanpas met coderen werkt mijn windscherm niet meer...reageert niet meer

[@albertodirosa8755]

Ma i sensori di pressione originali sono anche sensori di temperatura?

[@marcinek7714]

Hello, how to activate alarm two motoscan on the dashboard of a BMW 1200 gs lc 2014?

[@estebanalgar3218]

Thanks for the video. Could you share the link to buy these devices. Thanks again from Spain.

[@hristohristov7303]

Hi! Great Video! Can its works for K1600GT 2012 ?

[@johnharvey5338]

Interesting, can the Motoscan app balance the throttle bodies on the S1000XR, interested in getting and would love to see you do all the different tests on an XR as not this type of equipment before and want to purchase it after seeing you use it and saying how good it is, thanks.

[@Pawel5837]

Would you give a link for ECU cable, please?

[@mojah1]

Thanks for sharing

[@smotortips4875]

Weer een mooie video heb alleen een vraag moet je eerst de banden spanning activeren met dat Chinese apparaatje of kan je hem gewoon activeren en coderen zodat je de temperatuur kan zien Gr.

[@TheOldMechanic]

Nee hoor je kunt hem gewoon coderen. Ik heb ze geactiveerd zodat je het kunt zien op de video 😉

[@smotortips4875]

@@TheOldMechanic Dankjewel voor je snelle reactie.

[@rafael45357]

Does the gsa 2018 have this option ?

[@edsyphan3425]

I'm a bit confused. Did it already have tire pressre monitor installed? Just not the temperature? I just bought a 2013 gs and I'm just getting familiar with all of the gizmos.

[@TheOldMechanic]

Hi Ed, My bike had already the tire pressure monitor. But I could only see the pressure in the tires, and with the Motoscan app its possible to unlock an extra 'menu' (just 1 click more on the info button) and then you can also see the temperature in the tires too. I hope this explanation helps you a bit mate. Greets from The Old Mechanic

[@edsyphan3425]

Yes,that's what I was thinking. I don't have the scan tool, but a friend has GS911, maybe can do the same? But by all means, have a great Christmas and New Year. My shop time will be overtaken by 2 granddaughters.

[@TheOldMechanic]

Hi Ed, the GS911 can't do this..

[@peterzijsling1900]

It is also possible to see the sign for headed handgrips on your dashboard with the motoscan: both low and high head signs

[@bjejoh]

I can't find this setting on my 2011 R1200R. It should be possible since I have tire pressure info.

[@fredlgs1601]

Ein Super Gerät, funktioniert Super. Und das für 6,50 Euro bei Ebay// Danke Dir und natürlich China!

[@Life_a_bike]

Moet ik eens checken op mijn 2016 🤔

[@mrdin5332]

Interestingly the tyres are colder than the bike's indicated temperature by a "massive" 3.5 degrees C. At least I was paying attention.

[@Life_a_bike]

Hot air rises…

[@spec12able]

Jutro to włączę u siebie. BMW ma algorytm ktory wylicza ciśnienie w kołach - zmienną jest właśnie ta temperatura

[@beernaertkoenraad]

Er is nog een verborgen functie dat je kan coderen naast de banden temperatuur. Je kan ook nog de standen van de handvatverwarming op het display laten verschijnen. Is wel niet met elke k25 mogelijk. Uit mijn hoofd vanaf bouwjaar 2010

[@chaikongthye]

Can its works for f800gs

[@TheOldMechanic]

maybe..

[@sdevane75]

What year is the bike

[@TheOldMechanic]

Hi Stephen, its from 2010 😉

[@sdevane75]

@@TheOldMechanic thanks

[@TheOldMechanic]

@@sdevane75 your welcome

[@thinusthinus5462]

My speedo not working

[@khairulridzuan2017]

Boss, I need help. My R1200Gs (2011model) speedometer shows a warning sign(Red) same as yours. What is the meaning of the warning sign in red?? I'm new to this bike.

[@marcinhanderek4247]

Hi ,i Hawe problem ,my motoscan exchange place tahometr and speedometer ,how i come back ?

[@dougpolanski1685]

what was the chinese device and why was it used?

[@TheOldMechanic]

No the chinees obd2 doesn't work

[@jmileshc]

To activate the tpms wheel sensors, as they usually only turn on when moving. There's an Aussie with & GS who had 100% success with the Chinese tool, showing a DIY lithium battery change.

[@TheOldMechanic]

Thanks for the info. Do you got a link to that ?

[@jmileshc]

@@TheOldMechanic kzbin.info/www/bejne/b2TdnqKtdt2IpLM He waffles on a lot but uses the same tool you had it appears.

[@manuelrivera6873]

I have this and it works well on my 2016 R1200GSA. I point the device towards the air pressure valve and pressing it against the tire. Both front and rear will display.

[@rluigi1965]

I missed something. You already had a right Reading on your BMW . Why did u use motoscan ?