BMW R nineT Pure/Scrambler Rev Counter Installation | How To

[@matthewferguson2131]

Stop making me want a R Nine T Pure even more than I already do!!!

[@sidestand]

Muahahahaha......

[@TheMaxM]

It looks way better with the dual instrument cluster! Don't know why it doesn't come as stock with this combination.

[@sidestand]

Yeah seriously. Anything to save a buck a the Pure's price point I suppose.

[@MrTiagotero]

Man this makes me sick, a lot of motorcycles don't have a rev counter. It's so simple. You have a 1200cc BMW and you had to install yourself a rev counter. Greetings from Brazil!

[@sidestand]

Yeah it seems to be trending with a lot of manufacturers nowadays smh. Thanks for watching!

[@jarod-v8]

well done bro and many thanx for sharing this tuto 👍✌

[@d4444444n]

Can anyone can confirm if it works for 2020 r nine t pure? Thanks!

[@orkunataoglu5035]

Did you receive any response?

[@ceesklumper]

$700 plus bucks for a tach. Never mind then.

[@sidestand]

Yeah it's a bit on the high side...

[@hikkynakai]

Cees Klumper s

[@sareljvanderwesthuizen7459]

When I requested a quote for the parts from a BMW dealer, I was told that, as part of the installation, I would need to take the bike to a BMW dealership to update the engine management software. However, it seems that you installed the parts & everything works OK without any software updates... correct?

[@sidestand]

Correct, no software updates needed. Note that I do have a 2017 model, not sure if any changes were made on the later models.

[@federicosanta9439]

hi everyone! i'm from argentina! I'm close to buy the new BMW R NINET SCRAMBLER but i'm getting mad as i try to fin an official rev counter ? does it exist? i mean an original one for this model? i couldn't find it at BMW website. Thanks a lot!!

[@sidestand]

I ordered mine from a local BMW dealer's website. I'm not sure if it's available straight from BMW. You can also request the parts from your local dealer as well.

[@art.benitez7218]

I want to ask you a like your brown jacket and gloves please tell me which brand they aré tanks

[@sidestand]

Jacket: amzn.to/37AyNLs Gloves: www.retrobikegear.com/torc-beverly-hills-leather-gloves-red/

[@JoshSmith93]

It’s a shame you don’t get any fuel gauge or “range left” info. Anyone know of any workarounds for that?

[@sidestand]

Yeah agreed. Just reset your trip meter every time you fill up so you know your range.

[@erhardwoodsflooring4662]

Awesome video . I just installed it on my 2022 r nine t . That’s a lot. Keep them coming. We love your videos ..

[@ricardomartinsgomesdacosta3837]

I've just bought a BMW R Nine T 2019 and I would like to do the exact same modification - One Speedometer changed to a Speedometer and a Rev Counter with Gear Indicator. Can any one assist, please, and let me know if the same parts for the 2017 model will fit on the 2019 model and work exactly the same ? BY THE WAY, Sidestand, Thank you for your awesome video and parts list. I really hope that I can find someone that responds and that has made the exact same modification on another 2019 model.

[@edwardyu8902]

good job. I just wanna make sure the gear position indicator on the rev counter works fine because this is all I would care and pay for it. Thanks!

[@sidestand]

Thanks! The gear position indicator works beautifully without a hitch.

[@edwardyu8902]

Thanks a lot bro！I’ ll talk to the vender for it. You r being very helpful.

[@willychumd]

If you just want a gear indicator, this is available. www.wrs.sm/en/gear-indicator/120026-gear-indicator-gipro-x-healtech-bmw-r-ninet-scrambler-2016-2017.html

[@jimc793]

Great video. For those asking about whether or not this can be done on an Urban G/S, the answer is yes. See kzbin.info/www/bejne/emSXpGeDftJsbNE I'm still trying to get answers as to the parts, etc., if they are different for the Urban G/S install as opposed to the Scrambler or Pure. As for the comments about high price, remember that this isn't just a tach. It's also a gear position indicator along with displaying other functions and information. It's BMW, too, so that usually means more money. There are other accessory tachs out there but no redline (which I really like to have) and they are purely a tach -- no other functions. I really want this for an Urban G/S because I believe it completes the bike.

[@erhardwoodsflooring4662]

I’ve paid $820 for all the parts at the bmw shop..

[@Congsterism]

Thanks for this tutorial! However, I can't seem to find the rev counter cable on my 2021 R NineT Scrambler. Do you have any information on the new models?

[@sidestand]

I don’t unfortunately. I’m not sure how the newer models are wired. I wonder if they changed the wiring harness..anyway, good luck sorry I couldn’t help.

[@somara]

The rev counter cable is in the exact same spot. The connector head just isn’t exposed like his. Cut the zip tie and pull that cable out and you’ll see the connector.

[@Ranger4564]

This is what I was looking for. Great to know. Thank you.

[@sidestand]

Glad to help.

[@internalmartialpath]

sidestand I was wondering how come you had this tank color with Rev counter 🤣. I'm planning to get the r90 classic because it comes with spokes wheel and Rev counter. But I prefer the color of the Pure model

[@jonascagape520]

Does this have a gear indicator?

[@sidestand]

Yes it does.

[@federicoluchico8997]

hello sir how would you known based on the r ninety pure rev counter that its near overheating? is your rev counter bar visual or in celsius or farenheit? thanks

[@MrSupmah]

Thanks for great video. I just did the same installation. I do have a problem though. Once done the cables from the handle grips are touching the side of the speedometer and rev counter. So much that I can't fully turn to the right. So the clutch cable on the left is the worst. Did you not have this problem at all? Do you or anyone know how to get more slack in the cables? Oh no what have I done 🙂.

[@stepheneldridge6998]

Great video. ...I'm on the cusp of buying the R ninety Scrambler but don't like the single clock set up. Would I be able to do this on the Scrambler. ...? Steve

[@sidestand]

Yes this will work on the Scrambler as well.

[@uleiosu4582]

I have done it on my R9T/5 with one eye to your vid and the other one on the bike :) thank you A LOT!

[@ConorHildebrandt]

Any clue if these newer gauges will work on the older models? 2014 and 2015.

[@sidestand]

I believe the wiring harness may be different..but not 100% sure. I recommend consulting with your local dealer.

[@ConorHildebrandt]

I asked on Motorrad's Insta, and they said no haha they said the electronics and components are different. Dang it.

[@johnDukemaster]

This is good. Next thing on my list! :-) Btw, I tilted my handlebar forward and added 20mm on the risers. Feels good! Kind of more flattracker-ish. God I love my bike!

[@sidestand]

Nice! I can imagine that being more comfortable.

[@zedrickapollo4290]

After installing the rev counter does a gasoline indicator were also included?

[@sidestand]

Sadly no, it doesn’t come with a gas light.

[@Foggy9520]

Thanks for the great tutorial ... can anyone confirm if this mod is possible on the later model Pure (mine's a 2020 /5) ... switch layout on handlebar is different (only one rocker switch, no 'trip' or info' switches and I cannot see any non-connected wiring harness under the tank... would hate to order all the parts then not be able to do the mod. Thanks all for any info!

[@sidestand]

Have you checked the nineT owners forum?

[@federicosanta9439]

hi! does it work for a scrambler 2017 or 2018? thanks!

[@sidestand]

Yes it does!

[@AZGeek520]

Cool. Nicely done. Thanks for posting. Ordering parts now...

[@sidestand]

No problem. Have fun with the install!

[@Kommelokk]

Bit late, Can confirm the parts also fits European models. The lads at Escondido, hooked me up and shipped to Europe;) cheers

[@AlanTrades]

How much was it and where did you order from?

[@ghazaly75]

That is great working in the dark

[@ugc1220]

where to buy ?

[@youcanfoolmeonce]

I paid $200 on the Tach on my 2016 Triumph America LT. No extra parts were needed and it was a snap. BMW should set a reasonable price on it to make it affordable. But the Pure has a low price already and this is how they get you.

[@sidestand]

Agreed.

[@emptyth0ughts]

Thank you for this video. It helped me sort out the rev counter on my Scrambler :)

[@rjsalameh]

Great video, thanks! Just reading the comments below. Does this mean that the speedo does not have a gear indicator and you need to have the RPM Gauge in order to have a speed indicator?

[@sidestand]

No problem. If the R nineT version is equipped with (1) tachometer, it will have the speedometer but no gear indicator. You will need the 2nd tachometer that will include the RPM range and gear indicator. Hope this helps.

[@wojciechlisicki1064]

Thank You! Good Job

[@2ShoesPhoto]

I removed the 2 bolts below the headlamp and lowered that down on to the fender to make more room to get at the mount for the gauges. Good to see your post on the R9T forums and I also got my parts list from ElJefe to add this to my Scrambler. If I'm ever on the bike down in SoCal I'll look you up. I'm up in the Seattle area. Keep up the great videos!

[@sidestand]

Awesome! I feel the Rev counter is much needed for our bikes. Hit me up when you’re down! Thanks for watching.

[@2ShoesPhoto]

Will do, I travel down to SoCal once in a while for work so we will see.

[@bliff7]

Thanks for good video manual. Quick question: Is the zip-tied connector the only cable zip tied deep inside there or there are any others cables? I mean, when i extract the rev counter cable, should I zip-tie the cable(s) in the same place?

[@sidestand]

No problem. Yes, it is

[@bigwheelsturning]

Nice video, but how about turning on the lights the next time?

[@sidestand]

Thanks! Yeah I definitely need to upgrade my garage lighting, I'm only running a standard bulb and my GoPro doesn't do well in low lighting conditions.

[@bigwheelsturning]

I think I like the "Pure" with the added Tach better than the "regular" 9T. I guess with all the added stuff it does, the cost is not too bad, but still high. You miss the Traction Control?

[@sidestand]

Yeah the prices are a bit inflated, but thats BMW for you. Mine is equipped with traction control :)

[@delstephens7441]

Hi , Where can I get these clocks for my 2015 nine t . Thanks Del

[@sidestand]

Check out my links in the description. Thanks for watching.

[@bikeandski1]

Thank you for information, ordering parts today for my R NINET Pure today. Good luck with your beautiful bike.

[@orkunataoglu5035]

Hello. I have 2020 BMW R Nine T and I want to add tachometer as well. Where can i find it? Do you suggest me any site or link? Thank you

[@andybeer1969]

Hi. I want this on my scrambler . What part numbers do you need for this conversion? Thx

[@sidestand]

Check out the description below the video for all the part numbers 👍

[@gautam9]

Great video - does this have a fuel gauge and or miles to empty ? Or just the low fuel light?

[@sidestand]

It does not unfortunately. It's the same across all nineT trim levels & only includes a low fuel light.

[@myriad-lives]

Hi all, is there a way to show how much fuel is left? for what I know Urban G/S notifies you only once it hits the reserve level. Thanks!

[@niravshah1478]

No there is not

[@raymonddauphinais5806]

Thank you for this helpful video. I took advantage of a record breaking warm February day here in the northeast, and added a tach to my Pure using your instructional video, and then taking the bike for a ride.

[@sidestand]

Awesome! I'm really glad to have helped you out. Thanks for watching.

[@AZGeek520]

Thanks again for the install video and the parts list. I just got finished installing on my Scrambler. Piece of cake. Didn't need the 6638527780 - Screw M5x20/K53 Shield (QTY: 2) because I re-used the screws holding the original bracket. Did you use those for your install? If so, where? Also posted a link to your vid on the FB R9T Scrambler page...

[@sidestand]

I didn't end up using those screws as well, I'll go ahead and update the description. I'm glad this was able to help & thanks so much for sharing the video!

[@jeanmirabal2808]

sidestand where did you get the rev counter kit? Is it bmw original or aftermarket?

[@ClemIsRoaming]

This Thing is expensive AF !!!!! Welcome to the BMW World I guess XD

[@sidestand]

Yeah seriously 😒! But it’s worth it! 😭

[@drissgreen1280]

motogadget all day everyday

[@raymundano9191]

where did you purchased the tachometer? original bmw tachometer?

[@gerdschuster3205]

Why always that gloves for that clean jobs ?? No oil no nothing ...

[@simonferguson-avery6214]

hi just got the price for the parts in the uk from Bmw £420 will be saving up

[@sidestand]

Fantastic! It’ll be worth it.

[@np72np]

Are the part numbers the same? And are parts readily available in UK?

[@sendheron1]

Great video looks much better with the 2 clocks 👍👍

[@Sergio_Math]

Great video! I hope this also works for the Urban G/S, just adding the step of removing/installing the fairing, right?

[@naioti]

The sound design had me legit cracking up, lol nice work. You should get yourself some LED light bars for the garage

[@carlosdeolavarria9597]

Thank you sooo much for this video. I love the Tachometer and able to see what gear I am on while riding.

[@wolvie54321]

Thanks for a great video, I installed mine it’s no issue thanks to your step by step. After finishing, I am noticing hose rub on the pods and the headlight. Any tips?

[@IGovino]

Hi can u install the urban gs head fairing if u install the Second dial

[@sidestand]

It looks like it may be able to fit from pictures. Seems to be a tight squeeze & I haven't seen anyone attempt it. Out of curiosity I'll probably head to my dealer and take some measurements.

[@IGovino]

Same question I had too . Thanks

[@williamdoucette961]

Good job on the video. I did this easy install last week on my 2020 pure. The biggest plus for me was the shift indicator. As the bike does not have the kur/klunk going into first, nice to have the visual.

[@ninet8476]

Great job!! Thanks a lot. Today I did it on my nine T pure and its so easy with your video!

[@espsir]

Can't wait for my R Nine T.. 5 more years to go...

[@sidestand]

Awesome! You will absolutely love it!

[@philo2128]

Only another 2-3 years, hang in there. I’m waiting for another 2 years until my wife gets her unrestricted license before I upgrade to the scrambler.

[@mickeymobiwan4499]

Lol at that intro May I blow your mind for a second Sidestand?

[@sidestand]

Haha shoot away...

[@mickeymobiwan4499]

sidestand what you paid for that rev counter amounts to about 3 to 4 days stay over here. Welcome to SA LOL

[@sidestand]

Whoa!! Looks like I’ll be coming sooner 😉

[@mickeymobiwan4499]

sidestand dude I'm telling you. $ 1k amounts to about R 14k. Most people live on that for a month lol

[@sidestand]

Man you’re not kidding. That’s awesome!

[@blackberrybadness]

brilliant looking!!

[@sidestand]

Thank you!

[@roxasj888]

Hi there! where did you get the extra gauge from? wanted to buy 1 too!

[@sidestand]

From my dealer, I put the parts list in my description section.

[@roxasj888]

@@sidestand thanks!

[@desmo1968]

Hi, i also have put it on my pure 2018, works great. One question...i saw you dont change the clutch cable and yours is also very close and touch the rpm counter, i think about to change it with the oem cable from the classic nine t, that cable comes straith on and are not so close to te instrument... your opinion?

[@chrisgroove]

Same here, both the clutch and break lines are a bit stretched. Might need to take tank off to give them more slack perhaps?

[@jeroenvanhettema9020]

Thanks for your clear video. I just installed my rev-counter on my R Nine T Pure, and it was very easy.I did it in less than an houre. I also missed the shift-indicator for the gearbox while driving. And additional extra's... The price in Europe (NL) was 333,- euro fot the rev-counter and 115,- for the console with additional mountingboults and rubbers etc. And what a bike, the best buy in my life...

[@thebelgianwoodworker1739]

hi do you have a link? I am from Belgium and want to install it to.

[@hudsonquay]

Do you know if this will work on the Urban GS?

[@sidestand]

I still have yet to see this done, would like to know myself. You should give it a try 😉. The only issue I foresee would be clearance from the small windshield. But then again, its appears to be set just enough to squeeze in two dials. It's tough to tell without actually taking dimensions.

[@hudsonquay]

Thanks - I'll investigate and report back :)

[@a42abid]

Am curious about this as well - were you able to fit the tach onto the Urban G/S?

[@jetcarddude]

Great informational video, thanks and I am book marking this one.

[@sidestand]

Glad I’m able to help! Good luck 👍

[@Roger_Ramjet]

Jesus that's a lot of scrilla

[@rayb5394]

December thinking to pick one of these up with the Rev counter, heated grips, and factory alarm, on BMW configurator $12,200 with the $500 destination less any incentives in december

[@sidestand]

Nice! That’s a pretty good deal. You’ll love the bike. Thanks for watching!

[@vishant3030]

Awesome video, thanks for it. Have a S1000r and had a Z900 and was so used to the gear indicator, and just traded the Z900 for the RNineT Pure yesterday. Ordering the extra tach now. Thanks for the cool videos!!

[@sidestand]

Congrats on your purchase! You’ll love it. Good luck with the install & glad you’re enjoying the content!

[@amelsfr]

can you now see what gear you are in with the additional rev counter?

[@vikinglab79]

Did you watch the video?

[@supachip7443]

Thanks for this video, did mine today without any hitches cost £450.00 in the UK. Having the gear indicator was a must have! cheers m8.

[@sidestand]

Awesome! Glad to have helped.

[@jleoni32]

Did you tie the two wires together, or are the Speedo and Tach wires kept separate? Thanks for the video.

[@sidestand]

Speedo & Tach wires are separate

[@awild100]

Perfect - Got'r done, as per your engineering help. THANKS!

[@sidestand]

Glad this helped you out!

[@Wilson-Combat.45.]

HI BRO DOES IT SHOW THE FUEL LEVEL ?

[@Kommelokk]

nope

[@pipelucero]

this rev counter work on urban gs?

[@sidestand]

Yes it works on the gs as well.

[@PhlBrs]

Thanks for the video dude! My BMW dealership told me that some sort of coding would be necessary and that it is not plug and play...Obviously BS and I ordered the parts for my 2017 R NineT Scrambler. Can‘t wait to see those revs and the gear indicator

[@PhlBrs]

Oh and the parts are very expensive in the US. I spent 389€ or $427 for all the parts on your list at an online shop of a BMW dealership here in Germany.

[@sidestand]

No worries! How'd the install go?

[@PhlBrs]

@sidestand it was really easy. As you show in your video everything is just plug and Play :)

[@PhlBrs]

sidestand üuu

[@t4ketsuru]

does the r nine t have a fuel gauge

[@sidestand]

Unfortunately it does not.

[@prettyraul]

@@sidestand so it doesn't mesure the gas?

[@baptiste77777]

Hi there! Thank you so much for making this video! I agree with in terms of installing the rev counter completing the entire look and bringing it all together. I have a quick question about accessing the cable for the rev counter. I spoke to my BMW dealer and he said that it takes them 2 1/2 hours to install it because they have to take the fuel tank out to access the wire... I plan on showing them this video LOL. I am wondering if you had any trouble accessing it or if these guys are just looking to make an extra buck! Thanks in advance for your help!

[@sidestand]

Glad this was able to help you! I have a 2017 which doesn’t require removing the tank since it was zip tied to an accessible area. Not sure if BMW decided to move the harness on later models. Good luck & let me know how it goes.

[@baptiste77777]

@@sidestand Great! thank you for taking the time to reach back out! Best, BB

[@MrPetrovsky1980]

I have 2019 Scrambler it installs exactly the same way

[@mgonz0026]

@@MrPetrovsky1980 how do you control the tachometer? I only have one set of controls. it looks like he has two controls on the handlebar for it

[@MrPetrovsky1980]

if u push the button up you list the menu of speedo, push down - tacho. or vice versa, don't remember exactly

[@alkoenig85]

I installed mine today. It is going to be a great addition to the bike. Your video took away much of the terror I have doing work like this. New seats, tach, and the other half of the ride computer. Thanks!

[@sidestand]

Sweet! I'm glad this was able to help you.

[@konradbieniek5411]

What other parts did you order was there some missing from the list in the description?

[@sidestand]

All the parts I ordered are exactly as I listed in the description. Hope this helps!

[@JohnSandovalesq]

Thanks for making all these videos man. I was trying to decide between a Street Twin or a V7 Stone until I learned that an R NineT Pure existed and can be had for $10k. Good to know that the wiring for the tach is already there and that if I want to spend $700 I can get the dual clock setup. Also saved the link from your bar end mirror install. Definitely two mods I'll do once I get my new bike. And I'm hitting the subscribe button...now.