BMW R1100RT ABS MODIFICATION

[@rudiwebel582]

Thanks for your detailed post on this subject. It worked first time for me .

[@spency787]

Thanks very much for posting this, I have just gone through the whole modification process but I tapped into the green/blue wire not at the block connector (which requires the whole front of the bike to be taken off) but via the left hand switchgear wiring instead. Works just the same but simpler for me! 👍

[@andrewstockham7530]

I did this to mine today. Have been thinking for a while there has to be a modification. I was sick of seeing a "low voltage start" even with a new battery and always on trickle charge. Thanks you so much

[@henkcoenen6264]

Als ik de motor op contact zet en heb een spanning onder de 12v zou ik zeker eerst de accu controleren. Accuspanning onder de 12.7v is een aanduiding dat deze slecht begint te worden. Of een druppellader er opzetten als hij lang stil staat of een de accu vernieuwen. Dit is zeker een video die de moeite waard en heb hem dan ook opgeslagen.

[@denisamichal2316]

Many thankx to you guys, I own 1100 GS for 20 years now and blinking ABS was one drawback of this excellent machine. Even with 12.6 V ABS did not pass the test. It is also related to condition of starter motor I guess, but this modification just do the trick. Just finished after two-three hours of work, quite simple job, but not for complete novice. THANKS!!

[@cnkdvyp3602]

Thank you very much for help bro.We fixed problem with your video.Have a good life😊

[@howidoit6012]

Happy to help!!

[@magicoddeffect]

Excellent work. Nice and professional.

[@enolfre29]

Muchas gracias por el video , fue de mucha utilidad !!!

[@zettaker2181]

Thanks a lot. Actual even in 2023.

[@80sPhoenix]

Was just looking for a way to hack the abs voltage sensor. Same problem, battery fully charged and often lights blinking alternate the same. Annoying. Thanks for sharing.

[@alexandredacosta3236]

Danke schön hat sehr gut funktioniert, warum wird das von BMW angeboten.

[@dezabaleta1]

Solo he podido encontrar dos cables del ABS... ¿Cuál es el tercero? Es que no puedo leer bien las instrucciones. ¿Cómo las puedo encontar? Gracias

[@dezabaleta1]

I have only been able to find two ABS cables... What is the third? I just can't read the instructions well. How can I find them? Thank you

[@jordahn42]

Brilliant video, seems quite doable. Do you have a link to the PDF?

[@howidoit6012]

I find it on another youtube channel ,,maaike1998'' but is in another language and not available anymore . I can sent you the pdf in english [e-mail]

[@ritiporch6624]

@@howidoit6012 I would be very grateful if you could send me the PDF. Thank you so much and thanks for the video

[@howidoit6012]

@@ritiporch6624I would happy to ! Send me an test e-mail

[@gfldodge]

Added stainless steel brake lines 2 yr’s and the ABS light has been blinking ever since. I was told you need a BMW computer to fix the problem ???

[@howidoit6012]

I don’t know

[@Mariodeandrade]

Hi, I'm from Brazil, thanks for the tips. Where can I download the pdf or images you used?

[@howidoit6012]

Hi, send me an email and I will send it to you!

[@AngeloArtStudio]

Hi, I'm from Poland, thanks for the tips. Where can I download the pdf or images you used?

[@howidoit6012]

Hi, write me an email at [e-mail] and I send it to you

[@krystian8227]

Cześć, czy dostałeś informacje o modyfikacji ABS II. Mam ten sam problem ale brak materiałów aby podjąć wyzwanie tej modyfikacji.

[@AngeloArtStudio]

​@@krystian8227znalazłem stronkę ii według niej wykonałem modyfikację I działa super

[@damiantuttle1348]

Its still flashing?? I don't get what you've done ?

[@howidoit6012]

Flashing both lights at the same time is alright, when you rich aprox 15kmh speed will flashing no more ( when you have entire brake system ok)

[@damiantuttle1348]

@How I do it !!! no I'm lost?? Doesn't matter ,I'll find out somewhere.