Thank you. Your video gave me the little confidence I needed to this job myself and save not only money but time. My LED replacement was also from e-bay but did not come with the protective plate or all the rubber grommets needed for installation. Had to remove the old ones, tore one but it remained serviceable. A process but well worth it and your video was instrumental in my decision to do it myself in about a half hour of work. Thanks! BTW, my bike is a 2009 R1200GSA.
@dirksmith2540 Жыл бұрын
Hi once I fitted mine I need to adjust i as the beem is too low, how do I do this or are they fixed.
@1KemosabeLarry3 жыл бұрын
I returned from the BMWRA Rally 4 am, until Dawn, on interstate 40. That LED WORKED GREAT! I’ve always been anxious about Road debris, but all the light remedied that!!
@GFI3 жыл бұрын
I also like it very much.
@ardeiutzu2 жыл бұрын
Hello, i guess I owed you an explination regarding turnsignals error, fast blinking. Prior to owning the R1200GS I've owned an 2008 F800GS and bought for that bike led turnsignals but dind't installed them. So I swapped the old ones with the fast blinking from the R, put the F800 ones in and problem solved :). No dash error and no fast blinking.
@GFI2 жыл бұрын
So in your case you just used a different model? They were original?
@ardeiutzu2 жыл бұрын
@@GFI just user the F800GS ones which also i've bought from china. Strait plug&play wihout any errors.
@ardeiutzu2 жыл бұрын
If you want I can share with you a video ans a link with the one that I bought (on whatsapp)
@GFI2 жыл бұрын
It would be great. I will send you an email.
@GFI2 жыл бұрын
Andrei, can you send me your email to send you my phone number goforit.channel@gmail.com
@Porsche996driver3 жыл бұрын
Well all need these LEDs for safety and a modern look. Great work and video.
@GFI3 жыл бұрын
Thanks
@1KemosabeLarry4 жыл бұрын
Thank you so much for the patient instruction on completing this task, for I bought the same headlight for my 2006 GSA! I haven't completed it, just studying. I see that my wires are black white and yellow and the parking light * I suppose* is red. Don't see where it attaches. But, removal of the instrument cluster, etc., are what I needed to see!! Thanks so much.
@GFI4 жыл бұрын
Thanks for your comment. Good that you were able to feel more confident to go for it
@1KemosabeLarry4 жыл бұрын
@@GFI Wow, I have a new LED headlight, thanks to your efforts to educate me! Mine fit like a glove. Only thing I did differently, is I took a small piece of bicycle inner tube, cut a round hole for the "peg" on which the headlight sits, making a shim. The light is rock solid. Seems to be ok on the adjustment. Keeping my fingers crossed! Only problem I had, was unplugging the main light cord, but I didn't know how with that little silver looking clip. Once again, I thank you for educating me on the installation!!
@dmejiaa4 жыл бұрын
@@1KemosabeLarry Hi! Is your LED headlight unit the one with the extra ' hole ' below? Or is it the one with only 2 supports at the side? Mine does not have the support at the bottom and it moves up as it vibrates in the road
@1KemosabeLarry4 жыл бұрын
@@dmejiaa Mine has two knobs, one on each side of the light, just like the video/ And, a hole on the bottom in which to mount the knob/spike on the bike. Just like the video. In order to prevent shaking, I cut a little innertube from a bicycle, and cut a small hole, shoved it down on that protruding spike on the bike, which slips into the bottom of the light. So far, my install has been perfect. BUT, I do have a 'lamf' on the dash permanently. I am accustomed to that now. Here's wishing you good luck! Follow the videos, as he did a great job!
@dmejiaa4 жыл бұрын
@@1KemosabeLarry Thank you for the tip about the rubber tube. My headlight does not have the hole in the button but you gave me a good idea with the rubber piece! - About your LAMPF error, you should not get it. In case you want to try, I read that sometimes the little connector (the one that should go to the cable where the small bulb used to be) gives problems.. unplug it and turn the connector around.. so that the small wire makes connection to the other side - might be worth to try - Saludos!
@sacs200010 ай бұрын
Your video inspired me to make the change I had now added the LED Blinkers and the main light and I love it, it looks great and I will enjoy it on my rides
@GFI10 ай бұрын
Great to get your message. That is my main goal, to inspire people to Go For It. Thanks for your message. Enjoy and ride safe.
@ChristianWintersteiger4 жыл бұрын
Sérgio, many thanks for your support & the file for 3D print of the spacer - works perfect for me!👍🏻👍🏻👍🏻
@Lef_0073 жыл бұрын
How can i get this file?
@Bimmer_e904 жыл бұрын
A top man and a great help with fitting my headlight that was too high...made the installation very easy with this great video thank you and keep up the great work 👌
@GFI4 жыл бұрын
Thanks mate.
@stephanedekeyzer77504 жыл бұрын
Thank you for this video: i just finished the upgrade of my R1200GS from 2009 white watching it. I just need to watch how to do the light level adjustment, and it’s fully done. 🏍🤙🏼
@GFI4 жыл бұрын
Good job.
@juhanajatila4 жыл бұрын
And there is no fault message (Lampf) regarding the upgrade?
@stephanedekeyzer77504 жыл бұрын
Juhana Jatila not any: the bike didn’t mentioned the change.
@garymennell56012 жыл бұрын
Top guy - a great instructional video. You have gone the extra mile by sending me your unique spacer.. Thank You😀😀
@GFI2 жыл бұрын
You welcome. Ride safe
@fredoswego3 жыл бұрын
I'm really surprised that a $150 lighting kit off Aliexpress doesn't make the BMW computer throw up error codes. Since it doesn't, this seems like a fun upgrade. BTW, I find installing and removing big rubber grommets easier if you squirt them with some silicone lubricant first. If you don't have access to a 3d printer you could probably fill the space with JBWeld.
@GFI3 жыл бұрын
With the 3D printed part you have a little of adjustability with 2 fixed positions. It's true that no codes came from this unit. It's really nice.
@eboldreelh3 жыл бұрын
Thank you very much for your brilliant video and for sharing your experiences with the LED conversion. I recently bought a similar headlight, and I have the same issue with the instability due to the bottom fixing point. I am very impressed with your engineering skills and ability to "just" create the part, you needed. I tried designing something similar with a Stanley knife and some rubber - not as successful as yours ;-) Therefore I have send you an email kindly requesting the 3D print file. I hope you're still able to share it. Thanks again! B/R Esben
@tourer703 жыл бұрын
Really Amazing !! This headlight transform this bike!!
@GFI3 жыл бұрын
Sure it does.
@mooiweer4 жыл бұрын
Nice vid. Thinking about this upgrade also. Like the big hammer on your workbench for the minimum required toolset...
@GFI4 жыл бұрын
We use to call it "The Portuguese Wrench" 😂😂😂
@arjanbruining71562 жыл бұрын
Thank you Sergio for this great vid and sending me your spacer for the headlight! Awesome
@GFI2 жыл бұрын
Enjoy
Жыл бұрын
Thx for the detailed instructions. Maybe you could upload the stl-file of the spacer?
@GFI Жыл бұрын
Hi. Send me an email goforit.channel@gmail.com
@paulreed47244 жыл бұрын
Very good and informative video definitely be converting my front lights to led
@GFI4 жыл бұрын
Thanks for your message. Do it, it's a really good mod in terms of cost benefit.
@paulreed47244 жыл бұрын
Thank you for a quick reply it’s nice to know that you take time to acknowledge the comments that you receive keep up the good work . Regards Paul.
@DiscoveryDiversTokyo4 жыл бұрын
Awesome...looking forward to any developments you have with a vertical adjuster...
@DiscoveryDiversTokyo4 жыл бұрын
Has anyone come up with a solution for vertical adjustment?
@GFI4 жыл бұрын
Hi. Not yet. Didn't had time to work more on that.
@DiscoveryDiversTokyo4 жыл бұрын
GoForIt I see. Keep us posted!
@miroslawkaliciecki38464 жыл бұрын
Super movie. A few days ago I received a led lamp for BMW 1200gs 2009. But unfortunately it arrived with a damaged meter base mount and I need to fix it
@GFI4 жыл бұрын
Do you need some help?
@mtecnologia24 ай бұрын
Hello Sergio, First time here I bought 2007 the same color for my 40 birthday, so how can I request for you the spacer please?
@GFI4 ай бұрын
Send me and email
@astraman19705 ай бұрын
Just bought a led unit for my 2006 GS, how could I get hold of one of those spacers as don’t have a 3d printer?
@GFI5 ай бұрын
Hi. Please send me an email.
@luferco82 жыл бұрын
A ideia do espaçador está incrível... as voltas que dei à cabeça para perceber como poderia fazer para resolver a questão da folga da borracha do Farol... E mais uma vez, obrigado pela disponibilidade para fornecer o ficheiro e o espaçador. Cumprimentos do norte e sucesso para o canal. Luis Coelho
@GFI2 жыл бұрын
Obrigado Luís. Cumprimentos.
@morstyrannis19515 жыл бұрын
Seems like a major design flaw that the LED headlight housing doesn't have any provision to aim the beam. There's no point in having a brighter light if it's not shining in the right place.
@GFI5 жыл бұрын
It's true that you do not have an easy way to fine tune it. You can get at least in two positions with the spacer I've 3D printed for the bottom mounting point. Anyhow if you pay attention to the light signature at the door, the LED is at the exact same place than the original, so in my case it should be fine. I will make a video at night to get some more info.
@depinder114 жыл бұрын
Who makes this? What company?
@GFI4 жыл бұрын
@@depinder11 This unit was bought at Aliexpress so it is from some Chinese brand.
@jimgoddard39574 жыл бұрын
Yes, it's a shame that this ability is lost with the new unit. Our bike/car inspection in Japan tests beam alignment in x and y axis, so this is important. Also a shame we lose the quick-adjuster switch to offset weight in the back. Nice job on the install and video, GoForIt
@GFI4 жыл бұрын
@@jimgoddard3957 I am planning to design and 3D print an adjustment adapter, at least for the vertical axle. As soon as I have time I will post an update.
@jezjeyasingham50256 ай бұрын
Thank you, very informative Excellent mod
@GFI6 ай бұрын
Thanks for you message. Do not forget to subscribe :)
@PetrLexa-n7y Жыл бұрын
Hi, after a long search i finally came across your video with a solution for the vibration, perfect. Can you please send me the SDL file?
@GFI Жыл бұрын
Hi. Check your email.
@sergioa41913 жыл бұрын
Hey there! as far as I know you can program the bmw unit so it will work with led blinkers, no need to add resistors 😉
@GFI3 жыл бұрын
I can only connect to the bike ECU by the app Motoscan and I cannot find that option
@CamiloD88 Жыл бұрын
Hello friend, I think your video on installing the LED lamp for the BMW K25 is great. I've bought the lamp and I'm having an issue with vibration, could you please help me with the file for 3D printing? Greetings from Colombia.
@GFI Жыл бұрын
Hi. Thanks for your message. Please check your email.
@vanthanhtsan93033 жыл бұрын
I am looking to make the up grade with this new led head light but at the same time I was kind of scare to end up with a mess. Your video instade show clearly the work to be done and how to be done. The difference is that you are a pro and I an amatorial 😅😅! One thing I need from you if it is possible, to buy the 3D spacer from you. I have a 1200 adv 2006, I think that would be same to moto. Look for your kind reply and really great job 👏👏
@GFI3 жыл бұрын
I am also an amateur. Do not worry it’s a simple procedure. Send me an email about the spacer.
@vanthanhtsan93033 жыл бұрын
@@GFI thanks for your fast reply and send you my request by e-mail! Great job
@dirksmith2540 Жыл бұрын
Hi once I fitted mine I needed to adjust i as the beem is too low, how do I do this or are they fixed.? Thanks
@GFI Жыл бұрын
They are fixed. You can only adjust a bit in the bottom fix point. The piece I’be designed allow you to mount it in two positions.
@tommieluigi3 жыл бұрын
Great video! Thanks 😁👍🏻 looks so much better!
@GFI2 жыл бұрын
Thanks.
@henri76597 ай бұрын
Hello, thank you for your superb video! Would it be possible to have the small 3D printed part to make the adjustment? Thanks in advance!
@GFI7 ай бұрын
Hi Henri. Send me an email please.
@ardeiutzu2 жыл бұрын
Hello, So I did this job on my 2008 R1200GS and now I have the same issue with the turn signals. Can you please let my know what resistors did you use to remove the error from dash and stop the fast blinking? Many thanks for you time
@GFI2 жыл бұрын
Hi Andrei. They are not installed yet 😅 so I cannot be sure if they work fine or not. I just searched eBay for resistors suitable for Gs LED turn signals. I will address that soon and release video. If you want to wait a bit, I will share my experience with that.
@ardeiutzu2 жыл бұрын
@@GFI should not be that hard to do the job, but i was just asking for some support :). I'll do the job later this week end and let you know. Just as info, the GS uses 10W signal bulbs so you need a minium 10W rezistor (20w and 15ohm to be on the safe side)
@GFI2 жыл бұрын
@@ardeiutzu it would be nice to get the feedback with your experience on that.
@AlparsMotoAdventure Жыл бұрын
Hi, you made a really useful video. Congratulation. It helps a lot for the headlight conversion. Do you have the stl. or some other file extension to print that spacer? It will be really helpful I think if you can share with us. Thanks
@GFI Жыл бұрын
Hi. Thanks for your message. Please send me an email.
@johnnycahill4 жыл бұрын
Hi , love the videos .. just wondering have you fitted the resistors for the indicators yet ?
@GFI4 жыл бұрын
Hi Johnny, not yet. But they will be on soon. I am rebuilding a garage I bought for the mechanical work and couldn't go on with that.
@ruifilipefreitas80123 жыл бұрын
Olá efectuei a mesma alteração que VC fez mas o farol treme muito será que há a possibilidade de me fazer uma anilha igual á sua e eu pago todos os custos
@GFI3 жыл бұрын
Olá Rui. Agradeço o envio de email goforit.channel@gmail.com
@ArjanGovers3 жыл бұрын
Thank you for your nice video. With the help of your video I was also able to exchange my headlight (r1200GS 2012) for a LED one. I do have the problem that it keeps moving, so if you could help me with the file for the 3D print.
@GFI3 жыл бұрын
Hi Arjan. Sure, send me an email. goforit.channel@gmail.com
@ToniToni-sz9qx2 жыл бұрын
Hi, friend. I bought a headlight from China like yours. Very low light. Can you file please.
@GFI2 жыл бұрын
Hi. Send me an email please goforit.channel@gmail.com
@DawidFalck4 жыл бұрын
Hey mate. Greetings from Australia. Just bought the same head unit will be fitting it tomorrow. Thanks for the help. Do you sell those spacers? Or would you share the file for 3d printing? Loving the channel.. Thanks mate. D
@GFI4 жыл бұрын
Thanks mate. Send me an email and I send you the STL file. goforit.channel@gmail.com
@andyroyphotography8003 жыл бұрын
Great video really enjoyed very helpfully, are u still enjoying the led head light ?
@GFI3 жыл бұрын
Yes, it's working great, like the first day.
@siffa512510 ай бұрын
Hi, dude. This is very good resolution. I have same problem with light. Do you have above the picture from print on the sale ? Thank you ...
@GFI10 ай бұрын
Hi. Send me an email goforit.channel@gmail.com
@arturocepeda80293 жыл бұрын
Hi. What cash bars usted you motorcycle... after the change lights, the desk or computer show error on diplay?
@GFI3 жыл бұрын
Hi. The crash bars are from HEED. I have the error but due to the led turn signals. I will solve that soon and then after clear the error I can properly test. But for now I clean the error and it won't came back until I push the turn signal.
@garymennell56012 жыл бұрын
Hi, just received my new headlight. Can I get a spacer from you?
@GFI2 жыл бұрын
Hi. Just send me an email goforit.channel@gmail.com
@PauloAlves-mm6bq4 жыл бұрын
Excelente vídeo e explicação. Estou tentado a instalar um igual na minha GS de 2009, seria possível disponibilizar-me o ficheiro do espaçador ? Obrigado
@GFI4 жыл бұрын
Boa noite. Claro que sim. Envie-me .um e-mail para goforit.channel@gmail.com e eu respondi com o ficheiro.
@mikeslpinter88004 жыл бұрын
Hello, i just did my own led light. Step by step withe this awesume vid! But did you fix the turn signals. So that thee will blink normal speed?
@GFI4 жыл бұрын
Hi. I am glad the video was useful. The blinking rate is not fixed yet but I have already a set of resistors to install. I will post a video soon with that.
@mikeslpinter88004 жыл бұрын
I have fixt the fast blinking! Just put a 12v relais Between the cabels of all the blinkers. It was a lot of soldering but it Works!!!!!
@leonhardschimanowski92212 жыл бұрын
Hello, nice job. Is it possible to get the stl-file for the spacer? Some wishes from germany Leo
@GFI2 жыл бұрын
Hi Leo. Send me an email goforit.channel@gmail.com
@greenbike94754 жыл бұрын
Hello, can I mount this headlight on a K100 from 1985 ? I turned it into a scrambler
@GFI4 жыл бұрын
I am not sure. Probably you can but it might require some adapter.
@ThePhildbradshaw4 жыл бұрын
Great Video - looks simple to fit! I'm waiting to receive the unit from China but would appreciate if you could send your 3D STL file?
@GFI4 жыл бұрын
Sure, just send me an email and I will reply.
@eddwil73 жыл бұрын
Nice video. Could you tell me who makes your upper tank guard bars?
@GFI3 жыл бұрын
Hi. They are a set with the lower ones. The brand is HEED. heedshop.eu/en_US/c/R-1250-GS/161
@eddwil73 жыл бұрын
@@GFI thank you!
@sylvain79732 жыл бұрын
Hello my friend. I would have liked to have your spacer. How to contact you? Thank you for this great video!
@GFI2 жыл бұрын
Hi. Just send me an email goforit.channel@gmail.com
@istvangoround Жыл бұрын
tq for your vid.This Beast still legend and the best
@GFI Жыл бұрын
Thanks. It’s an amazing bike.
@terrydaniel86982 жыл бұрын
I just watch your video about the new light on yoursBMW 2007 was it any good did it do the job very good please can you let me know Terry
@GFI2 жыл бұрын
Hi Terry. The difference is huge. I have also a video with a night test. It’s not perfect but IMO it have an excellent value for the money.
@GreenDovesIRL3 жыл бұрын
what crash bars are they? they are amazing, btw I fixed that bottom issue of the headlight moving by cable tying that rubber Gromit from both sides so it stays put, worked perfectly
@GFI3 жыл бұрын
The crash bars are from Heed. If you managed to fix the headlight it's solved 😀
@GreenDovesIRL2 жыл бұрын
@@GFI It's now shaking! :( how has your spacer holding up? would it be possible to have it posted? I don't have access to a 3d printer. Thanks
@GFI2 жыл бұрын
@@GreenDovesIRL send me an email please
@GreenDovesIRL2 жыл бұрын
@@GFI Email sent!
@GreenDovesIRL2 жыл бұрын
@@GFI Thank you so much for sending the part!
@revolutionvocals686 Жыл бұрын
Brother i hope u can help me, i buy the same headlight it came today but my conection wires dont fit on my bikes i can sent u a picture?
@GFI Жыл бұрын
Hi. Sure. I will try to help.
@revolutionvocals686 Жыл бұрын
@@GFI do u have instagram maby we csn comunicate with insta
@GFI Жыл бұрын
@@revolutionvocals686 sure. Search goforitgfi
@brunos2503 жыл бұрын
nao tiveste alertas no ecran a respeito dos LED ? queria fazer algo semelhante, mas a idea de ter o alarma me tem colocado de pe atras. ..... i piscar rapido se resolve com a resistencia, a minha preocupacao sera mesmo o triangulo no ecran
@GFI3 жыл бұрын
Sim tenho o alerta dos piscas. Já tenho as resistências para montar e resolver o assunto. Ainda não tive foi tempo. Em breve.
@brunos2503 жыл бұрын
@@GFI resolvi com uns originais da BMW .. mais caros .. mas foi desligar um e ligar outro sem ser necessario nocos fios e conneccoes .. valeu pelo video ajudou na decisao
@GFI3 жыл бұрын
Eu vou tentar as resistências. Se não funcionar la vou ter que investir nos originais. Obrigado pela informação.
@brunos2503 жыл бұрын
@@GFI as resistencias funcionam .. testei ja .. apenas dao muito mais trabalho e adjcionam complexidade a algo simples como desligar o velho e instalar o novo sem cortes
@brunos2503 жыл бұрын
quando fazeres as contas ao custo das lampadas .. mais as resistencias e ao tempo que levas a modificar o conjunto fica dificil justificar
@rubenarbelaez79643 жыл бұрын
hey is your computer give a warning ? after running the new led light .
@GFI3 жыл бұрын
The computer guide warning but due to the turn signals, not the headlight.
@gaillard0313 Жыл бұрын
Brilliant job! Thank you. Do you have the link where I can buy one of them?
@GFI Жыл бұрын
Thanks. The link is on the video description.
@raduborza36203 жыл бұрын
Great video! I`m more confident now in making the change for my 2009 GS. will be really helpful if you could send me the spacer file. many thanks!
@GFI3 жыл бұрын
Hi Radu. You have email.
@XO431372 жыл бұрын
What about headlamp conversions for K1300R 2014? Seen K1300R replacements but also R1300GS[?] conversion for K1300R, too. Any experience with that?
@GFI2 жыл бұрын
Hi. No experience with that swap. It seems a nice idea, but I cannot help on that, sorry.
@beautiful_magpie2 жыл бұрын
Thanks for the video. Just sent you an email asking for the file, hope you still have it somewhere.
@GFI2 жыл бұрын
Hi Szymon. Replied already.
@RafaelPerez-yu2ce Жыл бұрын
Very good vídeo. Puedes mandarme el fichero para imprimir la pieza 3D? Obrigado.
@GFI Жыл бұрын
Please send me an email goforit.channel@gmail.com
@RafaelPerez-yu2ce Жыл бұрын
@@GFI Submitted. Thank you very much
@kevingortych22274 жыл бұрын
Hey can you send the link for the front headlight assembly?!
@GFI4 жыл бұрын
The link is at the video description.
@jantom19704 жыл бұрын
Nice video. Will it be possible for me to purchase the 3d printed part from you? I do not have access to a printer.
@GFI4 жыл бұрын
Hi Jan. Send me an email please. goforit.channel@gmail.com
@diegopauw4784 Жыл бұрын
thanks for the awesome guide!
@GFI Жыл бұрын
Thanks. You have email.
@salimjoumblat54454 жыл бұрын
Hi great video how do you fix the fast blinking turn signal?
@GFI4 жыл бұрын
Hi Salim, they e not fixed yet, but I have already the parts to fix them. Will upload the video soon. You need to use some resistors.
@salimjoumblat54454 жыл бұрын
@@GFI what kind of resistor are needed ?
@aliirfan1026 Жыл бұрын
Thank you for a great video. I have same issue with the headlight shaking. It would be great help if you can share the stl file for the spacer. How can i get that from you? Thanks in advance!
@GFI Жыл бұрын
Hi. Thanks for your message. Send me an email. goforit.channel@gmail.com
@aliirfan1026 Жыл бұрын
@@GFI Just sent you the email. Thanks a lot man!
@soo834814 жыл бұрын
It's the same model year bike, but with the headlamps, the fuel gauge doesn't work, and the fuel warning light works. Do you know the solution?
@GFI4 жыл бұрын
Hi. Never heard about that. Are you sure the display connector is attached properly?
@danielsanchez2718 Жыл бұрын
Hello, where can I buy the piece that you have made to hold the headlight so that it does not move?
@GFI Жыл бұрын
You can’t 😅. Just send me an email GoForIt.channel@gmail.com
@gprato14 жыл бұрын
Where did you get the turn signals. I got a 2007 GSA already with the LED headlight but would like to upgrade the turn signals
@GFI4 жыл бұрын
Hi. You can find a lot of sellers on Aliexpress. I will fix the blinking rate soon. Subscribe and activate the notifications, to get the video as soon as I release it. Thanks.
@jeremiasjurt77484 жыл бұрын
Hi man! Great video! Could you send me the spacer file? Thx man!
@GFI4 жыл бұрын
Hi Jeremias. Sure, send me an email goforit.channel@gmail.com
@manueldallaporta4444 Жыл бұрын
Could I have the stl file? Thank you
@GFI Жыл бұрын
Hi Manuel, please send me and email goforit.channel@gmail.com
@Brickflyer3 жыл бұрын
Great video. Helped sooo much with the install !!
@GFI3 жыл бұрын
You're welcome! Thanks for your message.
@victordomingo7128 Жыл бұрын
Hi i need the stl file for the spacer Thanks!!!!
@GFI Жыл бұрын
Hi Victor. Send me an email please.
@David-lb2vh4 жыл бұрын
Super great videos, thank's to you a buy one too. Can you share the file with the plastic piece to print it with an 3D printer ? Thank's !
@GFI4 жыл бұрын
Hi David. Nice to read your comment. Please send me an email and I will provide you with the file.
@mares0303 жыл бұрын
sorry, but can you adjust the light according to the weight on the bike as you do with the original headlight?
@GFI3 жыл бұрын
Hi. Not at the moment.
@adamstronski99592 жыл бұрын
Thanks for sharing. I bought it! How can I contact with you about that little plastic part?
@GFI2 жыл бұрын
Send me email: goforit.channel@gmail.com
@jaggajuggu4 жыл бұрын
Is there any sort of assembling or adjustment at the electronic control Unit necessary, when switching to LED headlight?
@GFI4 жыл бұрын
Hi. No adjustment required. It's plug and play.
@jaggajuggu4 жыл бұрын
@@GFI And do you have a link to the headlight? The link in the description doesnt work unfortunately. Thank you!
@jaggajuggu4 жыл бұрын
Oh now it works! All fine! Thanks
@InfoMasiniGermania3 жыл бұрын
Hi, can you tell me the dimensions of that small piece? Or send me the file so i can print it?
@GFI3 жыл бұрын
Hi. Send me an email please.
@GFI3 жыл бұрын
Sure. Send me an email please.
@ebig062 жыл бұрын
If possible, I would also like to get a file with a 3d model. Can you send it to me?
@GFI2 жыл бұрын
Hi. Please send me an email
@ToniToni-sz9qx2 жыл бұрын
Привет, Павел. Автор канала ответил тебе на емейл.? У меня проблема, мои комментарии сразу же удаляется после того, как я их публикую.
@ebig062 жыл бұрын
@Toni Toni у меня была такая же проблема. Но он ответил на почту. А что вы хотели?
@ToniToni-sz9qx2 жыл бұрын
@@ebig06 получилось таким способом исправить. И какой пластик использовали?
@ebig062 жыл бұрын
@Toni Toni конечно получилось. За пластик ничего не скажу. Распечатывал не сам.
@BerendvanDriel4 жыл бұрын
What a great video! I also bought one. Can I buy the spacer from you? I don't have a 3d printer myself :)
@GFI4 жыл бұрын
Just send me an email.
@BerendvanDriel4 жыл бұрын
i'm quite a noob with youtube, where can i find your email?
@GFI4 жыл бұрын
goforit.channel@gmail.com
@AndreiChifan8 ай бұрын
Loved your video, man!
@GFI8 ай бұрын
Thanks.
@sacs20002 жыл бұрын
I need to get in contact with U I need a piece on 3D print that you might be able to help me as I saw this great video I imagine you kan do it
@GFI2 жыл бұрын
Hi. Just send me an email: goforit.channel@gmail.com
@ministig199154784 жыл бұрын
Looks great but dose it put a bulb warning for the headlight ?
@GFI4 жыл бұрын
Yes, in my case it does. Not fixed yet.
@busa11164 жыл бұрын
Hi have you cured the bulb warning ?
@marlinjamesmero4 жыл бұрын
how much are you asking for the little 3d printed piece?
@GFI4 жыл бұрын
Send me an email goforit.channel@gmail.com
@genowynn92734 жыл бұрын
I have a 2004 1200 GS. Can I fit these onto this bike?
@GFI4 жыл бұрын
Hi Gene. Yes you can. Fit like a glove.
@genowynn92734 жыл бұрын
@@GFI Thank you.
@genowynn92734 жыл бұрын
@@GFI And does the headlight come with the bolts shown?
@GFI4 жыл бұрын
No, you need to reuse the factory assembly hardware. If you see the video I show how to reuse all the stuff. It is pretty simple.
@genowynn92734 жыл бұрын
@@GFI Okay thanks for your reply.
@rkosdini4 жыл бұрын
Where can i buy this one & how much ?
@GFI4 жыл бұрын
Hi, you can find the link at the video description. This one I bought in in AliExpress but you can find a similar headlight in a lot off different online shops.
@pieterdelange14614 жыл бұрын
Hi. What a great detailed video description. Thank you for the information. I subscribed. From South Africa. Will it be possible for me to purchase the 3d printed part from you? I do not have access to a printer. I am looking forward to your next videos.
@GFI4 жыл бұрын
Hi Peter. Thanks for your message. Please send me an email with your address.
@mikeslpinter88004 жыл бұрын
Does the headlight more kabels or somthing like the backlight? (Your other video)
@GFI4 жыл бұрын
Hi. The headlight do not need any cable extra. As I stated in the video the only extra stuff I used was the 3D printed spacer I designed to help fix the unit in the lower bushing.
@mikeslpinter88004 жыл бұрын
Did you fix the speed of the turn signals? If yes? How???
@revolutionvocals686 Жыл бұрын
Bro u are a great person!
@GFI Жыл бұрын
Thanks 😀
@aviacaoemdetalhes20144 жыл бұрын
Show o vídeo bem explicado!!! Abraço amigo direito do Brazil.....
@GFI4 жыл бұрын
Obrigado pela mensagem. Mais videos em breve. Um abraço.
@Lef_0073 жыл бұрын
Amazing! How can I get the file for 3D printing?
@GFI3 жыл бұрын
You have email.
@FloMoto303 жыл бұрын
Nice Video! I also bought the LED Headlamp, but it wiggles aswell. I hope you could sent me the File, so I can print it myself. I just sent you an E-Mail. Clever people helping others with clever ideas ;)
@hoschigs12003 жыл бұрын
Hallo, can i have The file. Pleas
@GFI3 жыл бұрын
Please send me an email.
@arjankramer48043 жыл бұрын
Hello Sir. Thanks for the helpfull video. Can you send me the drawing of the part you made on the 3D printer? Kind regards, Arjan Kramer
@GFI3 жыл бұрын
Hi Arjan. Please send me and email.
@mjb684 жыл бұрын
What brand of crash bar is that ? Great video 👍
@GFI4 жыл бұрын
Heed is the brand. Thanks.
@Bombilakus11 ай бұрын
Is iy possible for you to send me the stl file ❤
@GFI11 ай бұрын
Sure. Just send me an email goforit.channel@gmail.com
@inevern80272 жыл бұрын
How is it holding up after 3 years (headlight)?
@GFI2 жыл бұрын
It keeps going strong. No issues at all.
@inevern80278 ай бұрын
@@GFI is it road legal? Do you get any permits when buying it?
@GFI8 ай бұрын
@@inevern8027 it will depend were you live. No permit or document came with the unit.
@jantom19704 жыл бұрын
Hi I have received the printed gadget for my LED headlight it fits fine many thanks ...
@GFI4 жыл бұрын
Enjoy.
@Seb00464 жыл бұрын
Great job
@DS-sh5dy2 жыл бұрын
Hey! Thank you for the video! now i want a headlight like that too. can you send me the stl file? I'll be very thankful
@GFI2 жыл бұрын
Eheheh. Sure I can. Please send me an email goforit.channel@gmail.com