BMW R1200RT/LC Replace Brake Pads

Рет қаралды 21,291

Күн бұрын

Пікірлер: 32

@fredzuccarelli 2 жыл бұрын

My project for today!!!! You taught me how to change my final drive oil....and now the changing of my brake pads....thanks PAC-MOTO!!!!!

@PacMoto 2 жыл бұрын

Have fun, Fred! Thanks for the comment.

@rogerdebelg Жыл бұрын

did this for the first time a couple of days ago on my 14 rt using your video as a guide, went like a breeze thanks to your detailed and clear instructions, thank you :)

@PacMoto Жыл бұрын

Yes, and you saved $$$! Thanks for the comment!

@ppvshenoy Ай бұрын

Thanks much for this video. I'll replace the brake pads for my R1200RT now.

@PacMoto Ай бұрын

Yes, do it!

@thewelder9492 2 жыл бұрын

Wow. I listened to your wisdom on purchasing the speed bleeders. All I can I say is why did I not purchase these years ago? Lol. So easy to fit onto my 2018 RT. A breeze bleeding all three callipers. And no need to yell at the wife for messing up the rhythm when doing it the old way lol. I also ordered the same EBC brake pads. Thanks again for making the video and imparting your wisdom. Really appreciated here in frozen (hopefully not to long) northern Alberta!

@PacMoto 2 жыл бұрын

Cheers to you in Alberta. Yeah those darn speed bleeders totally change the project. Thanks for the feedback!

@Bigheaddonut 5 ай бұрын

At the 4:40 mark, I believe the torque figure should be 6Nm and not 19Nm.

@Sivandrewsen 5 ай бұрын

Thank you for the awesome video!we appreciate you!

@PacMoto 5 ай бұрын

That makes me smile. Thanks.

@leescharf780 3 ай бұрын

Yes the Grub screws torque is 6Nm not 19Nm!

@PacMoto 2 ай бұрын

You are correct.

@cozydram1 2 жыл бұрын

you made look easy thats my first project when the sails in and Felicitys in her new home

@PacMoto 2 жыл бұрын

Phil, it is an easy project. Let me know if you have any questions!

@mosser2557 10 ай бұрын

Why no copper grease on the rear of the pads? And never use the disc to push back the pads as can sometimes distort the disc.

@PacMoto 10 ай бұрын

What do you use to push back the brake pads?

@mosser2557 10 ай бұрын

Flat blade screwdriver between the t op of the pads not allowing any distortion on the rotors.

@cycberlocalcowboi6173 4 күн бұрын

oh no， I lost my locking pin for the front breaks… Should I purchase some? Or it’s ok to run without these small pins😢

@PacMoto 2 күн бұрын

Are you referring to the cotter pin in each side? You absolutely need those to ensure nothing slips apart while riding. You can get cotter pins at your local hardware store.