I'm wondering how important the hardware is in all of this. I do have a code/diagnostic app on my iphone for my BMW car. And a independent hardware dongle to connect to about the same port as shown here. The dongle just provides the wifi and of course the read/write capability. But the magic is all done by the software. I don't doubt that here the manufacturer takes care that you really have to buy the whole set, but does anybody know if this is all necessary?
@BillysBikeAdventures2 ай бұрын
Agree that these devices are just the interface to thew software and in that respect again you are right that the software is where the magic happens. The GS911 does provide the ability to manipulate the softeware and probably others do as well. Can't do it without them. Cheers. Billy
@CRAZYLEGSONABIKE3 ай бұрын
Mate thanks for that gave me a very clear and concise insight in how to use the 911. Mines coming tomorrow, great vid 👍🏻👍🏻
@BillysBikeAdventures3 ай бұрын
Thanks for watching mate. It will prove useful I am sure. A great piece of tech.
@MrRajkarthi4 күн бұрын
I had a GS 850 2020...and now I would like to update the ECU firmware to 2023 .. what is the procedure for that
@BillysBikeAdventures4 күн бұрын
This will have to be done by your dealer. Depending on their level of service you can either have the update at request the next time it goes into the service centre for something or if they are really good they may agree to ad hoc updates IE just phoning them and booking it in for an update. Mine cost £15 to update as a charge. Hope that helps. Cheers. Billy
@sprdave8516 күн бұрын
Love my GS911. Was able to clear service reminder and put cool new startup sequence on TTF. The GS911 community blog is awesome as well!
@BillysBikeAdventures10 күн бұрын
Hey mate. Thanks for watching and your comments about your experience. Will check out the community blog. Thanks for mentioning it! Cheers Billy
@lupuszzz2 ай бұрын
This is what I was waiting for since 10 years - THANKS!
@BillysBikeAdventures2 ай бұрын
Just make sure you have the bike software update to date to access all the software. Initially I could not access all the options due to out of date software on my bike. Had it updated and 💥 access to all the good stuff. Thanks for watching and your comment. Cheers. Billy
@OARotifa3 ай бұрын
Would it work for 1 R1150GS
@BillysBikeAdventures3 ай бұрын
Hey there thanks for watching and your question. Click on the link below and enter your bike VIN, this will tell you which GS911 is the right one for your bike if Hex have one for that model www.hexgs911.com/vin-decoder/ref/BillysBikeAdventures/ Good luck. Cheers. Billy
@OARotifa3 ай бұрын
@@BillysBikeAdventures many thanks Billy… will surely do now.
@BillysBikeAdventures3 ай бұрын
I just tried the link but not working. Try this one www.hexgs911.com/vin-decoder/
@OARotifa3 ай бұрын
@@BillysBikeAdventures I tried it myself and it didn’t work, so I was trying to find my way round. Many thanks once again. With this, u have just made me committed to the channel.
@ski3435Ай бұрын
My 2022 S1000XR came with the "sport" screen option!
@BillysBikeAdventuresАй бұрын
Ah ok, mine id not. Need to investigate if its a software update or diagnostic tool option for older bikes. Judging by your comment its probably a software update. Cheers. Billy
@robertwotring731819 күн бұрын
You can add 2 more screens as well unless yours had the M sport pack factory.
@user-ku4yk4ut4z2 ай бұрын
Thanks for that i was wondering if i can change the display on my bikes! I can't even begin to say enough great things about the GS911 it has saved me over 1000$usd since i bought it ...I had a throttle go out and i was able to program it without the dealer . I had to take apart my 2019gs engine and fix a 1-way starter clutch bearing issue and re program 2 sensors in the process it is the #1 must have tool for BMW GS owners, if anyone wants to know what its like to take a BMW 1250 Engine apart check out this video kzbin.info/www/bejne/oYC5hJ2jipt1iac
@BillysBikeAdventuresАй бұрын
Thanks for watching and your comments mate and for sharing the video, helpful! Great to hear the value you have had from the GS911. Cheers Billy
@xjr13john3 ай бұрын
Been around for a while now but like all hex stuff not cheap and doesn't fix any faults!
@BillysBikeAdventures3 ай бұрын
True, so probably not the tool for you.
@philipparana92253 ай бұрын
Fault code was dash not.sending message to ecu. You need a tender to put 14v to do any programming safely. Clear the code you should be good.
@enricocavallo17572 ай бұрын
Nice video!! It's possible to change the TFT screeen with OBD lx diagnostic or only with GS 911? Thanks😊
@BillysBikeAdventures2 ай бұрын
Hi mate. Thanks for watching and your comment. I am not sure on that one. Its these tools are interfaces for the software on the bike so very much depends what the diagnostic tool has been set up to access and I don't know what that is for the OBD LX tool. If you have one worth trying. Let me know how you get on. Cheers. Billy
@12masterr2 ай бұрын
So only the latest software from bmw will work? Can you share your software version please? I just got the bike and don't know wich version I?have!
@BillysBikeAdventures2 ай бұрын
023-012-030 is the software version on my GSA. Cheers. Billy
@gestofabero22 ай бұрын
Does It come in Spanish as well? I have a s1000rr, I don't know if there IS a versión suitable for my bike.
@BillysBikeAdventures2 ай бұрын
Yes, the HEX GS-911 is fully supported in many languages. The thing is that the language translation is done by their global network of distributors... so some languages are more UpToDate than others... especially for the sections of the GS-911 which are new (like new features from an update). These sections might still be in English... awaiting translation, depending on the language. 😁 The language selection is in the GS-911/Setup/Options page, within the Device software interface. Hope that helps 👍. Cheers. Billy
@Nellyboy19713 ай бұрын
It’s the total nuts Even on my 2015 gsa
@BillysBikeAdventures3 ай бұрын
Great to hear that you have and continue to enjoy your the GS911. Thanks for watching. Cheers. Billy
@fredgassityoutube71553 ай бұрын
How did you keep the battery voltage above 12.5V when programming? I could see on the screen it was only 12.2V when you were describing the process…
@BillysBikeAdventures2 ай бұрын
Hi there. Well spotted. I have a Optimate charger plugged in to the bike so helps when doing things like that. Cheers. Billy
@ShaunclintllandeglaJamesАй бұрын
I wish I had that today I got a fault in the bike same bike as yours but got to take it in to get them to look at it now but great video
@BillysBikeAdventuresАй бұрын
Ah mate. Never mind. Just helps to know what's wrong ahead of that dealership conversation. Hope it all gets sorted. Thanks for watching. Cheers. Billy
@wallyedmunds21812 ай бұрын
My R1250RS has the sport screen which is selectable by means of the TFT menu options. No need for a GS-911 to do this. Do you mean that with the GS-911 you can code the TFT so that the sport screen comes up as the default instead of the bar graph type rev counter screen when you switch on?
@BillysBikeAdventures2 ай бұрын
Spot on, yes. But older bikes like my 2018, will require that software update to access that 'sports' display that is an option is settings without the GS911. Cheers. Billy
@michaellowlow58022 ай бұрын
@scotty222128 күн бұрын
How do you get this on the screen? My dealer has no clue and neither do I, please let me know....
@BillysBikeAdventures24 күн бұрын
Hey mate. How do you get what on the screen? By screen you mean TFT? Can you be more specific please? Cheers. Billy
@scotty222123 күн бұрын
@BillysBikeAdventures yes. How do u get the M screen to show up. My dealer is clueless lol. The M sport screen on the TFT
@BillysBikeAdventures22 күн бұрын
If you are referring to the start up animation M screen then you will need to access the software on your bike via a diagnostic tool like the GS 911 that gives you access to the options for changing the start up animation. If you mean the M sports screen that displays your revs, speed, gear etc then that option falls in the menu button on your left side handle bar buttons. Hope that helps. Cheers. Billy
@scotty222122 күн бұрын
@@BillysBikeAdventures Thanks, that helps some.
@BillysBikeAdventures22 күн бұрын
👍
@frankhumphrey64022 ай бұрын
I don’t have a laptop only and apple phone and apple iPad so how could I update the software?
@BillysBikeAdventures2 ай бұрын
Hey there. Thanks for watching and your question. The software update has to be done at a Motorrad dealer. Ask for that at your next service or see if they can do it as a stand alone request. Once that is done, the GS911 is the interface to access the functionality of that software. You don't need a laptop or computer. You can use a tablet or smart phone. Same info will be displayed as a laptop just on a smaller screen. You will need the GS911 app to do that. Hope that makes sense. let me know if you still have questions. Cheers. Billy
@sprdave852 ай бұрын
Did not know this existed until finding your video. Just got one ordered through their website, Thanks!
@BillysBikeAdventures2 ай бұрын
Thanks for watching and hope you find it useful 👍
@jpaul45952 ай бұрын
Nice video! If you add the sport screen can you go back to the standard screen without connecting the gs911?
@BillysBikeAdventures2 ай бұрын
Yes you can
@jpaul45952 ай бұрын
@@BillysBikeAdventures Thank you, do you change screen on TFT?
@imadjawad44082 ай бұрын
Didn't work well on my R18B
@BillysBikeAdventures2 ай бұрын
Oh no really. What was the problem?
@zubin19930073 ай бұрын
Can u tell us which software virsion u are running on your bike?
@BillysBikeAdventures23 күн бұрын
Sincere apologies for missing your question. I am running version 023_012_030. Hope that helps. Cheers. Billy
@reubinthornton2 ай бұрын
None of this works on a K1600...
@BillysBikeAdventures2 ай бұрын
Have you got one and tried or experience elsewhere?
@reubinthornton2 ай бұрын
@@BillysBikeAdventures Yes, I was on the pre-order for a GS911wifi Pro. The Hex GS911 Forum has several others reporting the same as me, the features you describe do no work on any K600 '22 or newer with a TFT. I've opened a ticket with Hex code and there has been no response/fix.
3 ай бұрын
Can I use this in a 2016 GSA? Is it possible to activate hillholder?
@BillysBikeAdventures3 ай бұрын
Hey there thanks for watching and your question. Click on the link below and enter your bike VIN, this will tell you which GS911 is the right one for your bike if Hex have one for that model. Ensure the latest software update to your bike so that the tool can access as much as your model software allows. www.hexgs911.com/vin-decoder/ref/BillysBikeAdventures/ Cheers. Billy
@BillysBikeAdventures3 ай бұрын
I just tried the link but not working. Try this one www.hexgs911.com/vin-decoder/
@paulgibson4902 ай бұрын
You talked about software updates at the dealers I was told they bmw only allow updates now if there is a problem with your particular bike? Not on demand.
@BillysBikeAdventures2 ай бұрын
I am not sure that is accurate. I asked my dealer and no problem. May be a dealership thing but you are entitled to ask for it. If not doing it for you, poor service. Cheers. Billy
@CLLUK2 ай бұрын
Not sure why its called a 'Display Upgrade' rather than 'Display Option'. Still, thanks for the display but not for me.
@BillysBikeAdventures2 ай бұрын
Hey mate. Thanks for watching. Just a play on words. Cheers. Billy