Great lighting. Great training, tell them what you're going to tell them, tell them and then tell them what you told them. I so appreciate that Gareth speaks like an engineer, and not a yahoo.
@confirmhandle5 ай бұрын
Thx Nick for getting videos together and for your wonderful company.
@Super6ix062 жыл бұрын
Never knew FCPEuro had an actual shop. Might make the drive to CT.
@boostitbob21922 жыл бұрын
You need to do one on replacing the motor mounts … I just did it on mine this weekend … the mounts failed at 85,000 …there are no videos on replacing the on the F15
@bigfwopl48732 жыл бұрын
I did a DIY posted on f15bimmers. Might throw together a video
@yabonjin2 ай бұрын
Thank you. But why do my BMW X5 struts keep going bad every 45K miles? The make a lot of groaning noises now. Your video convinced me that perhaps I won't tackle this one.
@jonnyg77502 жыл бұрын
You guys have the best tutorials.
@leftlanedriver2 жыл бұрын
As someone who had not watched this video before my struts on a e83, I am your target audience on the rusted pinch bolt. I snapped the head off and had a bad few days! I eventually drilled it out. Wow. Great video! Lesson learned to do a little more research to avoid the hard learning :-)
@fcpeuro2 жыл бұрын
Right on!
@austinung61292 жыл бұрын
How did you go about drilling out the broken pinch bolt without damaging the bolt tread within?
@makipa200212 жыл бұрын
Yea it looks very simple actually “‘do it yourself “….. !!!!🤔 Great 👍🏻 videos for people who have the skill ,a car lift and ALL the tools necessary for this job !!!
@Tony-jv5pr2 жыл бұрын
Love your video's; I was able to change my front struts and control arms. Thank you! The only issue I have now is that my ride height is so low after changing the struts and control arms. I think the Bilstein sizes compared to the original BMW are different sizes. It would be nice if you could go over how to set the correct ride height. I'm suck trying to figure it out, seeing that there's no videos on it that I have found yet. It's so low if I go over a bump, it looks like it will hit the top of the upper control arm where the bolt is locking it. Please help thanks!
@K.T.789 Жыл бұрын
@FCP Euro, could you please do DIY for the same on E70? Thank you!
@Super6ix062 жыл бұрын
I'm about to attempt to change upgrade my F86 to KW V3s using YOUR videos. Wish me luck. Also, can you do a video on motor mounts replacement?
@MrWitchTube2 жыл бұрын
21:00 you say correct torque values (double checked with BMW manual plus your other video, as replaced 4 wishbones today on F15), but it displays the wrong values on screen
@blakesuss16862 ай бұрын
Great vid as usual. I used this to install a set of lowering springs. Interestingly enough the top control arm bolt that was supposed to be a pain, for me came out without a hassle. probably helped that i soaked overnight in penetrating lube. Unfortunately for me the bottom strut fork bolt to lower control arm did not, I snapped that big 21mm sucker in two! Now if i cld only find one of your vids for replacing the rear springs and not just the struts only??
@sale666 Жыл бұрын
Question.. could a strout mount make a knocking noise like really loud?? Nobody can find the nocking noise when going on uneven terain! I have replaced almost everything except the strout! Its really loud like cluck cluck cluck when going a bit off road or uneven road
@Remyp3882 жыл бұрын
Made this look easy great video thanks
@jonfrazier78272 жыл бұрын
Do you guys have a video for coolant tube to water pump removal and replacement. The gasket at the engine leaks water. Hope that was clear
@mcwinter5012 жыл бұрын
Really good video, I’ve got one to do tomorrow, this helps massively.
@fcpeuro2 жыл бұрын
Great to hear!
@oldjarhead11252 жыл бұрын
Another great DYI video. Thanks, I did learn a lot. BTW, good choice for your personal car.
@greggregorich8048 Жыл бұрын
how about rebuild rear shock absorbers for x5m e70
@Lefteris72 жыл бұрын
Does FCP sell that spring compressor?
@humanresource96592 жыл бұрын
MORE!!
@fcpeuro2 жыл бұрын
Okay!!!
@ionutbabalau58402 жыл бұрын
Very nice and clean job, since it's your car I was wondering if you can recommend it as a good reliable german family car, I was shopping for the same car but the diesel version. Thanks and can't wait to see the next job on it
@nela5596 Жыл бұрын
Great video! Can you tell me the part# for the upper bolt and nut for the knuckle, Thank you!
@fcpeuro Жыл бұрын
Hi Nela, here is a diagram for you to reference: bimmercat.com/bmw/en/search/selectGroup/56662/31_1061/31316851747
@alexliebt8 ай бұрын
What are the torque specs for front lower control arm ? I am confused.
@bibu-bib2 жыл бұрын
My n52 shutdown random standing,driving no power, no nothing. After the power comes back the date and clock resets, what could be? Where should I look? The battery is 3 years old
@mattmurphy3370 Жыл бұрын
What spring compressor are you using? Thanks!
@macdaddy66682 жыл бұрын
Hey want to ask a question I have a 2017 x6M with some crack on that strut tower you were working on my car needs some help. Would I have to remove motor to repair ?
@jamiearellano89032 жыл бұрын
Good job sir
@simplelangperorock2 жыл бұрын
FCP classmates: does anyone know the ‘fork bolt’ part # for e70 2007 X5 3.0si?
@authenthuse51652 жыл бұрын
Factory shocks lasted on 60k miles? Mine must be shot at 85k then!
@ddc1234552 жыл бұрын
I’m thinking the same thing at 160k with original struts. 🤦♂️
@stevemarquis81762 жыл бұрын
Yeah. I just replaced front control arms on my 2013 X5 at 89K and noticed that the shocks were from 20/7/2012. Just placed my order for the whole front end struts.
@Vlexthebarber19 күн бұрын
My x5 has 89,500 miles and the dealership quoted me $3k in repairs. I just saw this video I think I’ll waste a full day but save $3k😂
@hgresseau2 жыл бұрын
Do you guys sell the service manual 2016 X5?
@Frey71902 жыл бұрын
How are the rear struts done?
@tylera5010 Жыл бұрын
What is the brand and model of compressor used in the video?
@fcpeuro Жыл бұрын
Hi Tyler, this is a standard MacPherson strut compressor tool; Eastwood and similar companies make them!