Changing your BMW B48 charge pipe is EASY - 15min DIY

Check out my new branded gear!
www.ebay.com/sch/i.html?_from...
Lillith: The F87 M2 Competition build out
f87.bimmerpost.com/forums/sho...
Furiosa: The F32 435i build out
f30.bimmerpost.com/forums/sho...
The B48 motor for BMW is excellent, but share the flaw of plastic charge pipes as every other modern BMW. The charge pipe can break under normal usage, but especially so if your car is tuned. This is an easy upgrade with only a few simple tools and 15min or so to do it.
Required parts and tools:
Kies Motorsports B48 charge pipe
www.kiesmotorsports.com/produ...
philips screwdriver
Hook or long screwdriver
plastic trim kit
T30 torx bit or socket
Nice to have:
Good lighting
www.amazon.com/Ryobi-P720-18-...
Great music - Larkin Poe is just amazing, check them out!
www.larkinpoe.com/
Thanks for watching and please try everything at your own risk. All work shown in best faith and effort, do this at your own risk.
This description may contain affiliate links. By purchasing a product through an affiliate link, you'll get the exact same price and may earn a small commission. By purchasing products through affiliate links, you're helping make this channel possible and we want to thank you for your support!

[@ShockwavesFTW]

Thanks for the video. The only thing worth mentioning is that removing the clip that holds the sensor in (at 3:24) was surprisingly difficult. You'd think it would just unclip and pop right out, but mine was basically stuck on there. I had to use a flat head and carefully pry it out.

[@BMWDIYGuy]

Well done!

[@KarimBilal1]

Great video! What else do you recommend to change for b48? vulnerable or weaker parts

[@BMWDIYGuy]

That is the best place to start for sure.. it's a good motor, so keeping up on maintenance will serve you well. Whats next depends on tuning goals too if you are doing so.

[@brianmerkel3069]

Does this one fit the 2023 Z4 sdrive30i?

[@BMWDIYGuy]

Can't say without checking Parr numbers.. if the same motor then likely yes.

[@danielsavage4647]

What intake you running? I seen the carbon pipe work 🤭

[@BMWDIYGuy]

I have a great install DIY for just that intake.. 8)

[@cheezybread7783]

theres gotta be more parts to replace apart from this charge pipe??

[@BMWDIYGuy]

Lots of things you can do, but the charge pipe is quick and easy.

[@mondragonmsaul308]

@@BMWDIYGuycan you share a list that would give us a guide to upgrade to ensure reliability while tuning? Like a bigger oil pump, intake, crank shaft cylinder yk? Gaskets

[@tony.m4388]

a link to buy your intake pipe with airbox ?

[@BMWDIYGuy]

I have another video for that very install, and the video description has the product link 8)

[@tony.m4388]

oh nice! Where is link 8 ? @@BMWDIYGuy

[@BMWDIYGuy]

@@tony.m4388 kzbin.info/www/bejne/eprCpqGbgKyEn8k

[@tony.m4388]

but for the B48 @@BMWDIYGuy