BNC Male Clamp/Solder Connector # 301

Today we’re going to show you how to assemble a BNC Male Clamp/Solder Connector # 301
It Feature a BNC male connector on one side, and fits any RG59 cable on the other.
The items included are
-The locking bolt
-Washer
-Grommet
-metal Spacer
-Pin
-and BNC connector
The tools needed are
-a strip tool
-a RG59 cable
-and a soldering tool
Strip back the outer jacket and dielectric using the strip tool. The advantage of using a coax stripper is that it will strip back both the jacket and dielectric at the same time.
Fold back the braided shield and insert the connector housing onto the cable jacket.
You will need to push firmly and apply pressure to make sure that full contact is made between the center conductor and the center pin.
Insert the connector into the compression tool and firmly squeeze in order to make termination. This will compress the connector, securing it to the cable jacket.
Congratulations, you have successfully installed the BNC Male clamp/solder connector.
www.showmecabl...

[@BrianSeklecki]

You didn’t actually show the soldering step?

[@daleaferrrier]

Didn't show the solder part?

Also, what do you need the soldering iron for? Please, disregard this video, it's bad advice.