Boat catcher (home made)

[@robert3325]

❤ it.. Thanks for sharing it's a very good idea !

[@robert3325]

So, do you just reverse the spring to pull upwards when you drive on ? Regards, rob

[@lifeupnorth9385]

You should call it the "Captain Hook's Release" :)

[@keithscott9774]

So you showed us a "boat releaser"............... despite explicitly telling us it also catches. Still, well done for your DIY system. Nothing better then saving a few hundred dollars.

[@bgdesignandsolutions]

Title is misleading, it's not a boat catcher, it's a boat release.

[@thestigmach1984]

cool but what about reloading.

[@johnstoker5027]

We just fitted an EZI Guide to a Redco Sportsman Trailer on which we carry 4.3 Tabs Cruizer the Two existing Guides had to be removed and a couple of brackets welded to the trailer cross Bar to allow the Ezi Guide to be at the right level on either side of the back roller ( took it to a steel fabricator and he made the adjustments and fitted it for me we had the boat in the water while he did it and when I took the trailer back the wind was howlind from the north and the current coming in from the south the boat was almost impossible to line up with the trailer when we actually got the nose of the boaton an angle in between the Ezi Guide I started to wind it up and to credit of the product the boat went straight onto the trailer Iff fitted properly it is the perfect product 5th December 2016 John Ballina NSW

[@ZanyWabbit]

filmed on a casio calculator!!

[@LutMejiaJ]

NICE SIDESHOW

[@ShmeareD]

Mate nice job but that hook is fuggen ugly

[@LeonDieBoer]

aka "fugly"

[@joepsaila2837]

devalued the boat putting that on

[@Bob-bm6fn]

Zzzzzzzzzzzz

[@DFSHAVE]

PIECE OF CRAP!! LOL