BOAT TRIP

[@_O1_]

you have one of the few channels that i can not wait for new videos, all the best to you and your beloved ones! keep going my dude!

[@j.d.spiller5156]

I agree! What they said ☝️.lol

[@davidbennett1402]

Yes to that!

[@daviid6259]

same

[@mrchairman08]

same

[@AHarker100]

A delicate trip for you, but for your viewers it's gold. I wish I could have joined you as it loked so tranquil. I look forward to your next.

[@DeanofMachines]

Nice to see the ole girl moving! Can't wait to see what work you do.

[@BG-fm7zj]

Any time engine mounts are changed or adjusted you should check the transmission output shaft and propeller shaft coupling for alignment. Nice work tho

[@rasmAn2]

agreed, although i wouldn't be surprised if the engine alignment is still at factory settings. these cruisers don't get a lot of hours, and they don't have a lot of power anywho.

[@libeluke6749]

It’s better to check allignment of all transmission group. After last support change.

[@basvdweijden636]

As a boatbuilder I strongly advise a alignment even if there is inly a half millimeter hight difference it will wear both of the bearing sleeves down and that will get expensive. Are you still in Germany, let me know I can help you

[@alan6832]

The old mounts may be ugly, and may have sagged a bit, which forces an alignment, but they are still functional and will not come apart or transmit much extra vibration. All they need is some rubber protectant and that alignment, since they are guarded all around by metal and will not come apart. Most rubber protectants also prevent rust.

[@777rogerf]

The very high def. video is always very much appreciated, but especially on such a scenic trip.

[@johnt.starkey6421]

Your efforts to restore this vessel is amazing the next summer I'm looking forward to you puling it out and restore the hull. It's starting to look like a true yaught so to speak and your craftsmanship is amazing too. Thanks for sharing.

[@jbprospector3638]

Love your channel, it's a great journey with you. I'm so glad you shared that with us.👍😎

[@neilknight4899]

Hi, to remove your fourth engine mount you can remove the four studs on the mount by loosening one nut a quarter of a turn then remove another nut screw that on to loosend stud and lock the two nuts together with two spanners,then put a spanner on the back nut and the stud will come out.Keep up the good work,your you tube channel is very good.

[@GoofieNewfie69]

Or remove the bolts holding the mount to the bed. hehehe

[@bobjarrard]

You use a second back up nut to jam onto the bolts or you can weld the nuts to the bolt and grind them loose later or use new bolts. Bob in Nevada

[@Pete-eb4ec]

So iconic, the bridge with the two towers! My wife and I stayed in the hotel near it. Great view. She ran the Berlin marathon twice, so we saw a lot of the city. Thanks for the images!

[@lancedaniels]

Thanks for posting and sharing. Very nice to see the boat on a longer trip.

[@deryckschnee6376]

Hey, it's wonderful to see your progress on this. Congratulations on this milestone! I may not ever realize my own desire of building/restoring a boat however, following you along this journey helps satisfy that desire even if only as little bit. Thank you. Wishing you continued success on your journey!

[@alan-sk7ky]

Might be good to check and re align engine and drive shaft once the engine mounts are settled down and 'regular' I think ;-)

[@seawench555]

Thankyou for a fabulous journey from day 1 to now I've have really enjoyed every episode, your very talented and thorough with all your projects, I've also learnt a lot from you. Can't wait to see her after the new paint, I will miss the floating dock it was great. Thanks again🇦🇺💜😁

[@vladbis]

best restoration ever!

[@davidsherman5222]

In order to remove the rust from the barge I recommend an electric magnet on a bracket to stay off the hull. This will also get the fine particles making the air quality better.

[@kingoffcool]

Another nice update and progress, those motorcycle rubbers have indeed seen better times, luckily that is now arranged. I couldn't see well in your video recording how the connection between motor and propeller shaft is composed, it is only advisable to check the alignment between motor and propeller shaft after replacing the motor rubbers. Having said that I am looking forward to the next movie and update cheers .

[@MB_Kathrina]

Now I understand why I found your platform boat to sell at ebay Kleineinzeigen since last Sunday! Good luck for selling soon! Though I believe it is a pity to you. It surely was a great time behind you at this beautyful place, easy to get it from your stories. I count 2 and 2 together with the recent news about the trouble from the local city authorities with the water residents on lake Rummelsburg, that they all have to leave, alas. So sorry for that! But as you told, don't look back but forward! Will you give us also the story what will happen with your other two motorboats? I suppose you will sell them, too, due lack of place to stay. You was lucky to find the new place for your 1st boat, because in those uneasy corona-times it is crucial here in Germany! Too many boaters around. Congrats! Me myself will also face this question when my boat is ready from the refit and I want into water again. Pressing thumbs...✊✊ Well, new times, new luck! Seeing forward your next videos.

[@Ioughtaknowbetter]

I look forward to seeing the new paint. Your boat is truly a labor of love

[@bobt3374]

Amazing channel now we are all worried about what is happening. Take care & give us the news.

[@donnjohnsen1762]

Always so relaxing to watch your videos. Greetings from a Dutch boat lover!

[@duccioh1304]

It’s always, or at least 4-5 times for now, that I come home after a night out drunk and high, go to bed wanting something to watch and chill, and you dropped a video :)

[@cessnaes]

Great videos,I do recommend double clamping on all hoses,especially the fuel and seacock hoses.Love the boats and the work put into them..

[@denniscarreno8151]

Good to see you back...

[@MrPantss]

Great vid, tip for getting studs out that won’t come out with the nuts, put the nut back on then add a locking nut, I.e. the same nut on top of the original nut, lock them off against each other, then using a spanner, hit the inner nut to free up the stud. 👍

[@dhmik1]

Diesmal fiel das warten auf die neue Episode echt schwer! Danke für die tollen Episoden und das teilhaben dürfen.

[@switchedon6530]

Interesting to see further work and as to why the move.. thanx for sharing buddy 👍🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@donnakawana]

I am so excited to see what's next. I really am excited for each upload!! ✌🏼💗😊❣️

[@charleydahl2057]

i started watching your u-tube vid- when you first got your boat. all i can say is sure have worked your butt off on that Boat!

[@manudomin80]

Hello! I,m writing to you from the south of Spain. I love your project and I saw all your videos in only two days. I hope another one soon!

[@mrfarmer532]

7 hours at 7 hundred RPM, that must have been a very pleasant ride. 🤠👍🏼 Love these videos ! Thank you 😊

[@w4vy]

Thanks for the upload bro it's nice to see all your hard work being paid off I imagine you're very pleased with the outcome. Looking forward to finding out more about your next project. Love from the UK and the Philippines.

[@waynecummins9713]

Nice to see you back 😀 🇬🇧

[@brettmariotte5249]

I love the scenery along the way, keep the videos coming. Brett, Clayton, NC, USA.

[@patrickmaloney6440]

Ahh great, my coffee-break tranquility moment is here again!

[@clivestainlesssteelwomble7665]

Having changed a lot of rubber worn and perished suspension bushes and mounts ... I would have looked for some Polyurethane replacements. They last and perform better especially if theres heat fuel and oil contamination issues. Save the details and the best of the old ones as a pattern. Do not get WD 40 on your rubber ...if you do wash it off straight away. Or they will start cracking in months.🤦🏻‍♂️ I made that mistake ...

[@williammcdonnell3748]

looking forward to seeing your new project

[@gregbolitho9775]

Nice job m8, some of the Arcitecture was amazing. Looking forward to your next vlog, bettin however, you'll head back to the original spot, when you finish here. Thanks, you and yours stgay safe and well Eh!

[@danieljantsch9815]

I see that crane in the background of your new dock space. I am hoping you will be fixing the paint on the sides above the waterline for such a beautiful boat it’s got to have perfect paint.

[@dozergyp]

Good luck with all your travels, Boat is looking great You have made a really nice job of it 👍

[@ferdibra]

Can’t wait to hear about your next project👍

[@jefflange3009]

I would have suggested a schedule 8 washer under the engine foot on top of the new engine mount...

[@Scoobydooshoe]

Hey i would definitely put a jamb nut on that mount, if you don’t have any room for one you can drill a hole through the nut and rod and use a cotter pin to secure that nut.

[@rohanderstevens4759]

Blessing bro keep up the good work 💪# 🙏 🙌 💯🇯🇲

[@lesterwicklein717]

thanks for your vids very informative! glad i found your channel

[@jstokvis]

Excellant series of videos

[@user-ovsan007]

Красавчик!!! Я тебе маленько завидую!!!!

[@Gonzalo87Alas]

love your channel, hello from Brazil!

[@ThoughtfulWander]

Cool boat trip!! 👍👍👊👊🛥🛥

[@pierowetje]

Nice content. I will follow your video's

[@mrwolf5011]

Got that right great clips

[@Falney]

RIP platform boat. You will be missed little one.

[@martinhoflich6150]

me liked it also

[@wolfiewoolliscoft7518]

Gretings From The Uk - Well Done

[@johncorreia9041]

permission to come aboard captain, Thats easy to take out 4th motor mount put back 2 nuts back on one bolt tighten bolt together then put wrench on the back nut to remove it, luck. the last old mount will case premature wear on the new ones, and if I come visit, may I have permission to come aboard. for a cruise around the country?

[@ghhammer3498]

I'm extremely concerned about the boat dock you left behind. Are you going back to retrieve it soon? #SaveTheBoatDock

[@palilikock1341]

Hi from the beautefull island of aruba.nice waching your videos 😃

[@10lauset]

... Cheers to you ...

[@michelrood2966]

One DRIVES a car, and STEERS a boat 👍

[@outlawflyer7868]

First off, why did you leave? second, will you be returning to your patform and if not, did you just leave it there for others to take or did you sell it?

[@scottfuller6063]

Its possible the gearbox has too much oil. Check with warm engine and running. Oil level when engine running should be between the high and low on dipstick.

[@guglielmodicarlo4139]

would love to know where the money and time comes from ,

[@tommy8867]

Interesting video look forward to more

[@jonfife3637]

Why the move? What happened to the floating dock? Kicked off the lake? Where’s the Bayliner and red speed boat?

[@rockingbird2246]

Bin ja mal gespannt. Immer ne Handbreit........Grüße aus Mecklenburg

[@MrFIZZYMann]

Hello, I,m English. I Didn't Know Berlin had a serious water way Network. Do You Have to Pay some type of River Tax Licence ? If Yes, How Much & How is it Calculated Please?

[@damianfz]

Hi!! Greetings from Argentina!! I need more of your videos! Please!

[@mortmeek1290]

GREAT VLOG 💯👍💯💪💯👊💯🙌💯🤟💯🇺🇸💯😎

[@calykrish]

When are you getting your other boats including your platform boat coming to this new place. Need some clarifications on those boats.

[@martinhoflich6150]

Platform boat was offered on ebay Kleinanzeigen . maybee its already sold

[@DrMott]

Fantastic

[@SouthCanadian]

It must feel good to have 3 of 4 engine mounts replaced. Its a shame the 4th one was difficult.

[@anthonylane]

You always leave us with a cliff hanger

[@donniebooth8478]

I would love to live in where you do , beautiful

[@omvaren]

did you manage to get the temperature of the transmission/clutch? Was the oil-cooler for the transmission working alright?

[@staxter6]

Up on the hard for a darn good scrape and bottom paint job?

[@johnreid859]

What was your fuel consumption? Thanks for the video.

[@carlosvassel]

Hermoso barco

[@johnglover9935]

Sorry to say, you have made a complete hash of that job. You should only have 2 nuts on each mount exactly as you had originally. That will give you the adjustment required to align the engine which you did not do but should be done when changing mounts. Usually the top nut is nyloc to alleviate the need for thread lock.

[@johnnybuss5637]

You can mount hydraulics to the steering, much easier then.

[@garyhaines6335]

Young man !!! you do not drive a boat, You operate a boat!!!

[@douggraham5812]

Yes! And you don't "go" someplace. You proceed.

[@peterbeyer5755]

Yes and his first language isn’t the Queens English, it’s German and words often don’t translate that easily when concentrating on boating.

[@aktxyz]

Bravo !!!

[@hervepoulard662]

Are you going to repair the hull of your boat?

[@Slazlo-Brovnik]

Nur eine Anmerkung: Die Ziegelsteine die die Sonnepanele beschweren könnten bereits genug Abschattung erzeugen um die das ganze Panel tot wirkungslos zu machen. Ansonsten: Ich überleg ja immer den UBI zu machen, aber wenn ich den Gehalt in Infos so sehe:" In die Kammer fahren wenn Licht grün" - hab ich etwas Zweifel wegen der Sinnhaftigkeit.

[@romakayak]

What is the make and model of your transmission?

[@defektniafekti]

Where did you buy that AIS receiver? Thanks

[@calvarybuilders5689]

I'd say you left us hanging, it's time for you to come clean. New project?

[@Fr99763]

Is your airdraft really 3,78 meters? I would have guessed it is less? And what is allowed to pass through Berlin? Thanks in advance Cheers

[@MCallsen]

Wrobel Tiefbau macht auch Yachten :o Man lernt nie aus ;)

[@ericbroussard4310]

Hello, why you not protect a door outside for access cabine, the wood will be damaged!!

[@rancillinmontgomery2480]

You need to add power steering someday

[@normanboyes4983]

Your gearbox may have a blocked breather.😉

[@ВасилийТёркин-м1г]

Лицо счастливого человека.)

[@HistoricUlster]

Curious and curiouser

[@tinutolat2433]

Good morning

[@yardarm5]

Keep goin …

[@randigustavson3653]

So, does a friend have your platform boat tied up to theirs now? Please don't say you totally abandoned it....

[@pauldailey4477]

I don´t think he will say that, but will he say?

[@martinhoflich6150]

@@pauldailey4477 it was offered on ebay Kleinanzeigen

[@TentFever]

Or that might be power steering fluid in the Bilge eh’ LoL

[@DDBM.]

hello from Turkey :))))

[@martinbonner8017]

What’s the opening music please?

[@timomerk1669]

Servus I find des super was du so machst. Aber darf man fragen was du arbeitet das du das alles finanzieren kannst ?

[@ronaldokiehl4409]

Engine mounting rubber