Can Pontoons Go In Salt-Water? (and, what you need to know)

[@twotoned2774]

Very informative video. This helped out a whole lot on what needs to be done before, during, and after the fresh and saltwater trips. Thanks for taking time to make this video.

[@larryplogman7997]

Also in rough water I Leave front and rear gates open that way when water comes over bow it runs out just as fast

[@TheLastJayL]

Thanks for this.This gives me second thoughts about getting a boat.

[@michaelbrooks5758]

Great info. Truly helps in our boat buying decisions since we have access to both fresh water and salt water. The fresh water purchase appears to a better purchase for us. Thanks!

[@Smkelly1212]

Great perspective.. I have a Regency 254le3 with a 300HP Mercy Verado. At speed in the ocean and San Diego harbor With large waves and never had any issues with waves...

[@mikesavage9837]

Besides Barletta who else manufactures pontoon with solid/sealed keels and lifting strakes.

[@lukeprince7690]

What about fiberglass pontoons Beach cat makes a good one and I've got local company here up near me that makes one what about the maintenance on them in saltwater

[@johnfichtner1763]

What does a stainless steel fuel water separator have to do with salt water? I don't get it.

[@TGoff-fz7yh]

So you have an aluminum hull and use aluminum anode? That’s not going to do a thing.

[@shakerpineslovinglife9836]

So you need to paint the pontoons if you keep your boat on a lift also, do you have to wash them after each salt water use?

[@jmpersonal2402]

You need to seal the aluminum, a clear coating keeps the Oxygen from touching the metal and creating aluminum dioxide. The best and easiest to use is to coat with Nyalic, it is made in Atlanta, Georgia. It dries clear and sets hard on the surface. We saw it in Australia, they use it for coating trailer boats and toons. Some really big charter boats and ferries use it as well.

[@jponyboyace]

How do we treat pitting…salt water edition and now we understand but treatment???…bottom fine just the pontoons?..tops and sides

[@mikesavage9837]

Also, which salt water pontoon boats would you recommend looking at?

[@larryplogman7997]

Answer this for me even though sometimes I run out into salt water in the ocean which is about 35 miles from where I dock and the Salt freshwater dividing line is about 20 miles from dock shouldn't that fresh water run back to dock be flushed my boat and motor good enough

[@dlisma87]

Does having a polypropylene pontoon tube fix the corrosion problem

[@burtburt1755]

So glad I found this video. I learned so much from watching. I have been having big problems with the drain plug Bosses on the rear of the outer toons on my 22 ft G3. Just corroding away. They are only inches away from the anodes. I tried zink and aluminum. This is happening while it is on the trailer. I heard you say brass as a second metal. The drain plugs are brass. What do you think about removing the brass and replacing them with plastic screw in plugs. Also I added a nice transducer last year and the electolices covered the ducer and the wires up to the top of the toon. I just checked and the little washers on the ducer are Stainless. Would changing them to aluminum stop that? Thank you again for the great videos and the time you take to help others.

[@jponyboyace]

Wow pitting is a problem for me…..how do we stop on pontoons…treat…..???

[@wes326]

Stainless steel, not steal. Good video, second the warning about leaving stern drives in saltwater. Outboards in saltwater are ok as they will tilt completely out of the water.

[@BoatBuyersSecretWeapon]

FREE For Boat Shoppers: www.BoatersSecretWeapon.com/Toolkit FREE Boat Buyer's Toolkit for new or used boat shoppers will give you 28-pages of checklists, questions to ask and how to demo the boat the right way so you don't miss a thing. Plus, get the cost of ownership calculator so you know precisely what your cost of ownership will be. FREE For Boat Owners: boaterssecretweapon.com/pages/boater-bootcamp FREE Boater Bootcamp for newer boat owners gives you insights on boat ownership basics, navigation and practical rules of the water and how to avoid, be prepared and handle

[@alexfratianni5707]

What are your thoughts on leaving a tritoon in the water with bottom paint?

[@alexfratianni5707]

@@BoatBuyersSecretWeapon i have a key west that i leave in the water but im worried about the fiberglass just think metal would be safer to leave in especially because i have it scraped every month

[@yorgosrenken3651]

Can a saltwater pontoon go in freshwater (or the opposite) ? What are the problems or dangers with that ? I would like to know because I live in Geneva near the lake but I wanted to put the boat also in the sea in Greece.

[@yorgosrenken3651]

@@BoatBuyersSecretWeapon Thanks a lot

[@Mauricesmodels]

I have had a Yamaha jet bait in the past that I used in saltwater. I am now getting a pontoon boat and want to use it for the day in harbors and back bays, which are salt water. Do you think I need to worry about the anodes or will super detailed cleaning be sufficient?

[@jponyboyace]

Why do they pit?….how to fix!!!

[@yousuckathomerepair7301]

Yeah so fiberglass it is!