Compensator Man Of - War Replacement

  Рет қаралды 68,164

Bob & Tam's Excellent Adventures

Bob & Tam's Excellent Adventures

Күн бұрын

Пікірлер: 208
@electraglidewayne8654
@electraglidewayne8654 2 жыл бұрын
love my Man O War comp. Had a Baker, never was right. Put this on almost a year ago. Will never have anything else. No noise, no clunk, easy to find neutral. 2013 Ultra.
@bobandtams
@bobandtams 2 жыл бұрын
Sounds great
@whatyoumakeofit6635
@whatyoumakeofit6635 5 ай бұрын
Bob and tam, i just now going through this myself. Looking for info on KZbin. You guys handsdown have the best info video on youtube for the moan o war engine sprocket. Greqt job !
@bobandtams
@bobandtams 5 ай бұрын
Thank you
@ZevGriffin-s5u
@ZevGriffin-s5u Ай бұрын
MOW comp is the best! Quiet and smooth. It doesn’t get any better.
@bobandtams
@bobandtams Ай бұрын
Works great
@emeryhvac1023
@emeryhvac1023 2 жыл бұрын
These guys seem real solid. Definitely a good replacement. Thanks
@bobandtams
@bobandtams 2 жыл бұрын
Good product
@braeden20
@braeden20 2 жыл бұрын
These guys sound like they know what they're talking about. Some great into there. Great video
@bobandtams
@bobandtams 2 жыл бұрын
Thanks
@deanphillips8270
@deanphillips8270 2 жыл бұрын
I have a 2013 ultra classic, I replaced the factory compensator with a screaming eagle at about 32K I'm at 69K right now and its just starting to make some of the tell tale noises (the clunk when you shut off and getting harder to find neutral) I've been looking at this option very seriously, I like the fact that its rebuildable, I think this video has convinced me, thanks for the video guys 👍
@bobandtams
@bobandtams 2 жыл бұрын
Glad we could help
@jodyhodge2129
@jodyhodge2129 2 жыл бұрын
Almost purchased Dark Horse to replace my comp on my 2012 Ultra with 34,000 miles. Was concerned with proper alignment with clutch basket. Will go with this one next time though.
@patrickhollis5332
@patrickhollis5332 Жыл бұрын
Yea I did mine couple months ago and you definitely feel the difference in throttle response huge difference
@edmundwasilewski
@edmundwasilewski Жыл бұрын
Mine was a waste of time, couldn't get after sales service, and it rattled like crazy. Only way to stop the rattle was to do the chain up bone tight 😢
@johnjohnson2855
@johnjohnson2855 10 ай бұрын
Show the inside of your product.
@OutlawDiesel1
@OutlawDiesel1 Жыл бұрын
Talked to Andrew personally to order a crankshaft. Excellent company. Super nice and built me the perfect crankshaft
@bobandtams
@bobandtams Жыл бұрын
Sounds good glad you got it worked out
@powamoto
@powamoto 2 жыл бұрын
You won't give up on this baby I know you love her 🚀🙏✌😇🤘
@bobandtams
@bobandtams 2 жыл бұрын
Will get it right
@emersongraves5869
@emersongraves5869 Жыл бұрын
I’ll be calling you Andrew, my dark horse is very noisy when operating and we did all those assurances. Great video and very informative……
@bobandtams
@bobandtams Жыл бұрын
I ended up have to change out the chain too
@saddlebagrail
@saddlebagrail Жыл бұрын
I just installed a Dark Horse Man -O -War on my 12 RG,extremely satisfy to date,also install an hydraulic tensionner SOHB from Oregon at the same time,,,,,and had install my Man O War kit and a HUGE MAJOR improvement over the SE compensator kit I installed last year, not comparable at all,now my bike ride like it was mean to be,not cutting corner like MoCo did to save money,had problem at first with the bolt length that was bottoming due to Loctite in the thread,life is good now ,for those who read this,and tired of the oem design.....
@bobandtams
@bobandtams Жыл бұрын
Thanks for the comment
@IRONTOSS
@IRONTOSS 6 ай бұрын
can you elaborate on issue with bolt length? because too much locktite? or bolt too long?
@tumyung9666
@tumyung9666 6 ай бұрын
It's a crying shame Harley Davidson HASN'T rectified this problem.
@bobandtams
@bobandtams 6 ай бұрын
Most of these replacements when you upgrade your engine to higher tourqe and HP. If you keep your engine stock it could last a lifetime
@westcoast3595
@westcoast3595 2 жыл бұрын
Some one listened to kevin baxter at skunk works.
@bobandtams
@bobandtams 2 жыл бұрын
There you go
@mikeskidmore6754
@mikeskidmore6754 2 жыл бұрын
My Buell shifts better than most Harley's because of the Genius of Eric Buell .. He changed the Sportster engine over to Double shift rails ect.. The best way to get my Buell into neutral is to do it while coasting @ 10 MPH or faster. It's harder to get it onto neutral when you are at a standstill. I recently adjusted the clutch and tightened up the Primary chain . My Yamaha FZ-07 shifts like Butter compared to the Buell.. It shifts so much better than the bikes from the '70's and 80's that I was used to riding ..
@bobandtams
@bobandtams 2 жыл бұрын
Thanks for the info
@realm3434
@realm3434 2 ай бұрын
I noticed you reply to alot of comments saying stock compensator fails with performance work done. At what stage does it become a problem? Stage 2 cam a problem? Or we talking high compression 107 build?
@bobandtams
@bobandtams 2 ай бұрын
@realm3434 What happens when you start to build up your motor you run it harder that's the issue
@randym5143
@randym5143 2 жыл бұрын
Awesome video! They kno what they’re talking about!! Bob an tam great as usual!❤️
@bobandtams
@bobandtams 2 жыл бұрын
Thanks
@dougfresh1341
@dougfresh1341 Жыл бұрын
Installed @ 70k on 12 ElecGlide on advice of Kevin Baxter Easy install. Excellent operation. Now have 96k miles. Trouble free. I do get the rattle they warn of if your bike is in neutral and the clutch lever is open. Meh, no biggie. Love the ride.
@bobandtams
@bobandtams Жыл бұрын
Great to hear!
@dougfresh1341
@dougfresh1341 Жыл бұрын
@@bobandtamsOops… Baxter. 😊
@edmundwasilewski
@edmundwasilewski Жыл бұрын
I bought one from the States, could not stop it from making this horrible noise. Run out less than 3 tho. Was a waste of time and a lot of money. Another mate bought one as well, same problem. Went back to the stock comp. Almost no noise. The only way to stop the loud noise was to adjust the chain bone tight. Mechanic said I would eventually wear bearing and do serious damage. STRUGGLED to get any real help from the company. They called it neutral rattle.. 😢
@bobandtams
@bobandtams Жыл бұрын
They are noisy than stock that's far sure. If you have a stock bike original equipment is good. Problem with doing high performance is it could blow the orginal compensator.
@MiguelGarcia-oh8nn
@MiguelGarcia-oh8nn 10 ай бұрын
Can you please elaborate on the rotor issue please? I installed the compensator and it’s crazy loud, I didn’t check the run out but maybe this is the issue? Love the compensator but it’s extremely loud, guess I’ll check the runout… thanks for the video it’s very helpful despite the more questions I have.
@bobandtams
@bobandtams 10 ай бұрын
Check the Dark Horse website. You need to check the run out,then check the chain tension and examine the adjuster
@icecreamsikeyuhasz5689
@icecreamsikeyuhasz5689 Жыл бұрын
Great video! 09 UC here, my stock one is still ok I believe, easy neutral & not too much noise. One noise I do get is occasionally on hot restarts I get a bad clunk & smoke out the air cleaner, buy if I lay into the starter button it usually starts fine. What are your thoughts? 41k miles, 103 TC, 510g cams, SE Phat Shotz, thanks!
@bobandtams
@bobandtams Жыл бұрын
Could be a few things. Timing is off, jackshaft on starter is worn or even low battery can cause it to spin over slower or starter drive not enough power so not kicking the jackshaft all the way out. Sounds like they need to take it to their local mechanic.
@icecreamsikeyuhasz5689
@icecreamsikeyuhasz5689 Жыл бұрын
@@bobandtams My battery is 4.5 years old & thats ancient for an AZ battery. Good point, I'll start there. Timing is fine, starter is probably the next thing to check. Thanks!
@eggxeiber
@eggxeiber Ай бұрын
Good video 👏 what type compensator repair kit need for 2005 HD fat boy
@bobandtams
@bobandtams Ай бұрын
You can go to darkhouse.com
@toddoverby5538
@toddoverby5538 Жыл бұрын
Andrew is awesome. I have worked with him on two bikes. Their work is legit. Little O
@bobandtams
@bobandtams Жыл бұрын
Very cool
@darrinleazer6784
@darrinleazer6784 Жыл бұрын
I have a 2015 Fatboy and it's got just a little over 22,000 miles on it as I write this. Which is 07/24/2023, and I have seen other videos about the Man of War compensators, and was thinking about getting one for my bike. Though it doesn't make any noise right now, but' I definitely would like to get one. But' I just can't afford to get one right now, because at 500+ Dollars is a lot for me at the moment. Yes' I'm sure some are going to say' it's better to spend the time to get one before I spend a lot more money later. Easier said than done. But' I will get one as soon as I can afford to.
@bobandtams
@bobandtams Жыл бұрын
Good plan👍
@jbpooh
@jbpooh Жыл бұрын
Yall can keep the Man o War comps! I put one in and pulled it back out after about 500 miles. Couldn't stand the noise it made. Now I'm stuck with a $600 paper weight.
@bobandtams
@bobandtams Жыл бұрын
Sorry to hear that, yes they do make more noise than stock😏
@cholber1
@cholber1 9 ай бұрын
That chain deflection looked more like 1/4in am I looking at something wrong?
@bobandtams
@bobandtams 9 ай бұрын
Not much to it
@ericrhinehart6055
@ericrhinehart6055 8 ай бұрын
I saw the same thing, 1/4"
@smacnp
@smacnp 6 ай бұрын
i have a 2012 103 stage iv, i have replace 3 compensators 3 times in six years. I will have to give this a run. may have make a trip up there from lubbock Texas, so y'all can fix me up.
@bobandtams
@bobandtams 6 ай бұрын
It solve your problem
@genebulford8636
@genebulford8636 2 жыл бұрын
Thanks for a great vid an a lot of infoe I have a 2007 ultra screaming eagle CVO ,low mileage on it when I got it, so far all is well, thanks for the vid an I read a lot of the comments,lots of good infoe
@bobandtams
@bobandtams 2 жыл бұрын
Glad you got some help
@voodoo-rides
@voodoo-rides 2 жыл бұрын
Lmao I mentioned when all this started, you needed a compensator it acted and sounded just like mine did. Completely dismissed it hey your the expert tech.
@bobandtams
@bobandtams 2 жыл бұрын
I had two different noises....first noise was when riding slow speeds Secound one was clunking when turning off
@dawnbradrick6289
@dawnbradrick6289 2 жыл бұрын
Dawns here 🌞why are no other women here? I really feel at home in a garage and Working on machines is second nature to me.
@bobandtams
@bobandtams 2 жыл бұрын
Thanks for watching
@CabinGuy
@CabinGuy 8 ай бұрын
perhaps ask the women that? or do you expect us to force women onto the site?and what's that got to do with compensators?
@mikeskidmore6754
@mikeskidmore6754 2 жыл бұрын
I just looked in my 2008 Buell Thunderstorm parts book they call it a Rotor Sprocket Assembly 38tooth .. Do they not use a Compensator in the Thunderstorm engine ?
@bobandtams
@bobandtams 2 жыл бұрын
no compensator seems only Harley Has that I can see
@kurtruppenthal9506
@kurtruppenthal9506 2 жыл бұрын
So did that fix your second noise? They didn't show if anything was wrong with the stock compensator.
@bobandtams
@bobandtams 2 жыл бұрын
Cluncking noise when I turned it off, plus now it is so easy to find neutral
@mikecarreca7864
@mikecarreca7864 2 жыл бұрын
Outstanding information and video.
@bobandtams
@bobandtams 2 жыл бұрын
Thanks
@garyevans5958
@garyevans5958 2 ай бұрын
I have a 2008 ultra classic I can't find the correct roror.My rotor has the cup type rotor Assembly. Where can I find the flat rotor for the dark horse application. I have the bike torn down ready for re assembly
@bobandtams
@bobandtams Ай бұрын
your comment was flagged, just saw it. Did you find one?
@markw.3743
@markw.3743 2 жыл бұрын
Thanks Guys! Now get it broke in 👍🏻!!!
@bobandtams
@bobandtams 2 жыл бұрын
Will do
@Donfleebie1
@Donfleebie1 2 жыл бұрын
I put a Baker Compensator and their Chain Tensioner in my 12 because I wanted to make my bike ‘bulletproof’ and now the primary whines so much it’s starting to drive me crazy. Baker doesn’t seem to want to help me, so I’ve got $800 tied up, and I’m not happy.
@bobandtams
@bobandtams 2 жыл бұрын
Sad to hear your troubles
@ashebarley77385
@ashebarley77385 Жыл бұрын
Need to buy George Bryce metal thing look up star racing
@onOnewheel_jay
@onOnewheel_jay Жыл бұрын
thanks for all the info will be updateing my comp soon
@bobandtams
@bobandtams Жыл бұрын
No problem 👍
@Tomnone-q5d
@Tomnone-q5d 2 ай бұрын
I have a 2015 ultra. At 2,000 rpms I get a whining noise from the primary only when i decelerated. It’s been to 2 different dealers. They said some bikes make noise. Can’t stand it.
@bobandtams
@bobandtams 2 ай бұрын
Check your channel tensioner
@Tomnone-q5d
@Tomnone-q5d 2 ай бұрын
@@bobandtams I did .. I changed from the the auto ajust to a manual ajust. The hotter the motor gets the louder it becomes. Changed the inner primary bearing and compensator.
@john0270
@john0270 Жыл бұрын
wish they would build one for the early twin cam, I have an extra spring in my 95" stage 4 2000 fxdwg... seems to work but IDK
@bobandtams
@bobandtams Жыл бұрын
It's tough when you have a older box let me check with them
@CarlosGarcia-ls4hn
@CarlosGarcia-ls4hn Жыл бұрын
@@bobandtams I am in the same boat. Did you ever get an answer? I have a 2000 Harley Springer.
@bobandtams
@bobandtams Жыл бұрын
yes you have to get an adapter which will come with it
@CarlosGarcia-ls4hn
@CarlosGarcia-ls4hn Жыл бұрын
Why would a Man-O-War not work for a 2000 Heritage Classic? I am looking to replace my existing compensator, but the Dark Horse website states it does not fit a year 2000 Springer. Baker is the same way. What can I do?
@bobandtams
@bobandtams Жыл бұрын
I'm doing some research on it. To be able not to lose you please email us so I can send you what we find out contactus@bobandtams.com
@juniorsnowbird
@juniorsnowbird 7 ай бұрын
What am I missing? You wanted a half inch of chain movement, you had a quarter inch and said it’s good?
@bobandtams
@bobandtams 7 ай бұрын
We rechecked at 100 miles. That I didn't folm was now at 1/2 inch
@jash7401
@jash7401 3 ай бұрын
Whats the deal??? Some, like this video, push hard on the primary chain to achieve the half inch while others use their little finger to lift the chain half an inch. They both can't be right. I loosened mine and the 2nd gear clunk disappeared. What to do??? Can I get a little help plz?
@bobandtams
@bobandtams 3 ай бұрын
Call Dark Horse tech service
@jash7401
@jash7401 3 ай бұрын
@@bobandtams Well the expert representative was standing there watching and approving the chain looseness while most others go a lot looser. I don't have the man O war product. Thanks for responding.
@bobandtams
@bobandtams 3 ай бұрын
@@jash7401 I did install a new HD tensioner that helped with the noise
@whatyoumakeofit6635
@whatyoumakeofit6635 2 жыл бұрын
I don't understand how the compensator issue made it hard to find neutral? are you able to explain how that effects finding neutral
@bobandtams
@bobandtams 2 жыл бұрын
There is a verified problem with Harley-Davidson Big Twin compensating sprockets. The compensating sprocket buffers torque from the engine and the limitations with this part may be most obvious in newer, big bore engines. A part that was adequate in an 82-cubic-inch engine may not be adequate in a 103-cubic-inch engine. Harley has not issued a recall. The company is, however, selling a reinforced compensator replacement kit, part number 40274-08. The symptoms of a bad compensator are a loud clang at start up, trouble shifting into first or neutral and a sound like gravel in the front of the primary around 2200 RPM. But, the only way to know for sure that you have this problem is to pull the primary cover off and look.
@whatyoumakeofit6635
@whatyoumakeofit6635 2 жыл бұрын
@@bobandtams thanks. I hope I did not seem condescending. I just wanted to understand how one effects the other
@bobandtams
@bobandtams 2 жыл бұрын
@@whatyoumakeofit6635 I wonder too but it did fix it
@IRONTOSS
@IRONTOSS 6 ай бұрын
im reading alot of different experiences guys have had once installing this dark horse compensator? its very loud? I definitely dont want more noise! if its going to make the bike get into neutral easier and less vibration than thats a selling point but what would make it louder and noisier? $500 + for more noise in primary doesnt seem like a good buy for me...i think I may just upgrade the chain tensioner.
@bobandtams
@bobandtams 6 ай бұрын
It is a little louder. if you've done any real Proformance work on your engine, HD will fail
@stanwerner7484
@stanwerner7484 Жыл бұрын
I love Man O War products
@bobandtams
@bobandtams Жыл бұрын
Good stuff👍👍
@d.a3446
@d.a3446 Жыл бұрын
Good video and information. Thanks!
@bobandtams
@bobandtams Жыл бұрын
Thanks for watching!
@paologiorgini9821
@paologiorgini9821 5 ай бұрын
Buongiorno questo compensatore è adatto per trike harley davidson flhtcutg anno 2011? Grazie buona giornata
@bobandtams
@bobandtams 5 ай бұрын
Yes
@cannonskier1
@cannonskier1 2 жыл бұрын
Hey Bob and Tam, I have the EXACT same 2014 CVO Ultra. I have 40k miles and I'm getting a fairly loud tick/knock coming from the area of the compensator. No trouble finding neutral but the bike sometimes sounds like the battery is low when I start it. Does any of that sound familiar to you and do you recommend this new compensator now that you've had a chance to ride with it? Any feedback would be greatly appreciated! Thanks very much!
@bobandtams
@bobandtams 2 жыл бұрын
Noie yes hard to start I put easy start cams in it
@cannonskier1
@cannonskier1 2 жыл бұрын
Thanks! Now that you've been riding with it for a while, would you recommend it? I'm trying to decide if I should go with the factory Harley compensator or this new one. Any feedback on your experience would really help me with that decision. Thanks again!
@bobandtams
@bobandtams 2 жыл бұрын
@@cannonskier1 it is a little noisy but worth it. HD just doesn't build a quality onre.
@dougfresh1341
@dougfresh1341 Жыл бұрын
Very happy with my install. HD had problems with compensators from 10-16. They had like 5 designs. That says something.
@johnjohnson2855
@johnjohnson2855 10 ай бұрын
Dark horse says not to install S&S easy start cams with this compensator
@charlesmccardell3597
@charlesmccardell3597 Жыл бұрын
I have a 2011 FLTRU, I assume I will need a oil deflector, where can I get one? Harley part number?
@bobandtams
@bobandtams Жыл бұрын
You can go to Dark Horse website and buy one. darkhorsemoco.com/man-o-war-motor-products
@JRF946MX
@JRF946MX 2 жыл бұрын
I like your tech videos very interesting
@bobandtams
@bobandtams 2 жыл бұрын
Thanks glad you enjoyed
@charlescurtis1817
@charlescurtis1817 7 ай бұрын
what will happen if I run the MoW compensator on my 2015 Road Glide with S&S easy start cams? Is it a serious problem? Or is it something that rarely happens?
@bobandtams
@bobandtams 7 ай бұрын
I have easy start cams SS, No issues
@curtissumner9797
@curtissumner9797 2 жыл бұрын
Thanks for the video, learned alot.
@bobandtams
@bobandtams 2 жыл бұрын
Thanks
@troypoorman5948
@troypoorman5948 Жыл бұрын
Why did you not go with a manual chain tensioner?
@bobandtams
@bobandtams Жыл бұрын
I have one now
@markhenry8936
@markhenry8936 2 жыл бұрын
Guys....I installed the Man o War and I'm have much more vibration at hard acceleration. Is there a break-in period maybe for the VITON bushings? Don't get me wrong...I like it so far. Don't have the tapered torx bolt in yet, or the oil deflector...hard to find them, waiting for shipping.
@franlaflash9503
@franlaflash9503 2 жыл бұрын
You probably shouldn’t be riding it if you don’t have the correct parts in place for the application. He explains it clearly in the video what he recommends for the product to do what it’s meant to do. If you don’t have the correct ingredients when baking a cake, the end result isn’t the same.🤷🏻‍♂️
@bobandtams
@bobandtams 2 жыл бұрын
True that's why they wanted a video to solve some issues out there
@tcb8295
@tcb8295 2 жыл бұрын
Thanks for the video. Pretty soon and you'll have a brand new bike...LoL
@bobandtams
@bobandtams 2 жыл бұрын
All most
@ricksutton4296
@ricksutton4296 2 жыл бұрын
Awesome video thinks you guys
@bobandtams
@bobandtams 2 жыл бұрын
Thanks for watching
@jamescantlin1072
@jamescantlin1072 8 ай бұрын
I have the dark horse and a 130 T man nothing in my 2020 is stock except the crank and gear box you can just run to 5g on rpm through every gear and be at 140 mph on gps runs awesome put frame stabilize on as well was windy day i did that pretty sure will get way more out of it but with wind started getting some front end shack so back it down so good enough for me well probably never do the again next time i decided to redo motor there will be a dark horses crank put in and bike will be halled frome Michigan to South Carolina and having T MAN do everything or do my self harley dealer did a good job on motor but tore my motor down then put my bike back in corner in a dusty were house with no cover and tuck 3 months to get back and had 2" of dust on it with finger prints all over it and when i dropped it off all parts were there wont take back there every again I will drive 16 hr one way to make shure my bake is in good hands.
@bobandtams
@bobandtams 8 ай бұрын
I'm sorry to hear you got bad service. Sounds like your bike is running strong
@lookin420
@lookin420 10 ай бұрын
is there any of the gopro footage
@bobandtams
@bobandtams 10 ай бұрын
We used 2 cameras on this not sure if we used gopro. I will have to look next week, we are out of town.
@frankneher9192
@frankneher9192 Жыл бұрын
90 k on my stock one when will it need to be replaced?
@bobandtams
@bobandtams Жыл бұрын
If you have upgraded your motor, pr run it hard....If you hear cluncking noise when turning off replace it
@jamesrobinson2433
@jamesrobinson2433 Жыл бұрын
I have a 1973 flh. Can this compensator work for that model
@bobandtams
@bobandtams Жыл бұрын
No it will not
@jamesrobinson2433
@jamesrobinson2433 Жыл бұрын
Thank you
@micheallinderman481
@micheallinderman481 Жыл бұрын
How do I find the oil deflector piece. Or is it in the kit?
@bobandtams
@bobandtams Жыл бұрын
Comes in the kit
@jbpooh
@jbpooh Жыл бұрын
My kit didn't include it! Harley sells it and the main bolt separately though. It's a screaming eagle part.
@darrellruff6480
@darrellruff6480 11 ай бұрын
What The Correct Torch For 2016 Roadglide Ultra Primary With DarkHorse Compensator?
@bobandtams
@bobandtams 11 ай бұрын
it should be in the instructions. I'm thinking 150ft lbs
@carlbruhn1772
@carlbruhn1772 Жыл бұрын
The other huge component is the crappy chain tensioner.
@bobandtams
@bobandtams Жыл бұрын
Differently needs to be improved
@ashebarley77385
@ashebarley77385 Жыл бұрын
I need a dark horse crank then I’d feel better lol. I have the man of war on and only have a cam upgrade but to nervous to go more cause I’ve heard it mess the engine up with these man of war comps on They say use HD compensator but switch the sprocket metal out for George Bryce 400 sprocket metal piece
@bobandtams
@bobandtams Жыл бұрын
Man of war is recommended on high torque motors, up grading will not hurt it.
@portercoogan4862
@portercoogan4862 Жыл бұрын
Just say it,Twin cams are a poor design,still riding a EVO,no compensator problems no plastic chain thingy problems,I hope the Milwaukee 8 is better,it's def fast.
@bobandtams
@bobandtams Жыл бұрын
Thanks for watching
@bryanday1326
@bryanday1326 Жыл бұрын
Anyone know where you can get the tool to check the run out.?
@mvrigger
@mvrigger Жыл бұрын
Darkhorse sells them for $85
@mikesteele1789
@mikesteele1789 Жыл бұрын
What are options for 05 twin cam?
@bobandtams
@bobandtams Жыл бұрын
You need a rotor kit to go on Manager runs about 125 to 150 extra
@randymccalla9995
@randymccalla9995 Жыл бұрын
In my humble opinion, the Torx bolt should be discontinued, All of the Torx on GM brake calipers, have been superceded with Hex bolts because of a Very High Failure to be removed without damages.
@bobandtams
@bobandtams Жыл бұрын
Very true was auto mechanic for over 25 years.
@smacnp
@smacnp 6 ай бұрын
where are ya'll located
@bobandtams
@bobandtams 6 ай бұрын
Shop is in Rapid City South Dakota
@soupydog1
@soupydog1 2 ай бұрын
Wheres the Light Horse ? I"m with The Light not the Dark
@bobandtams
@bobandtams 2 ай бұрын
Too funny
@richardnava2507
@richardnava2507 Жыл бұрын
Why didn't you turn on the bike to show the people that difference in sound
@bobandtams
@bobandtams Жыл бұрын
I should of
@TravisZx9
@TravisZx9 4 ай бұрын
You mentioned getting false torque readings but never said what anything is torqued to
@bobandtams
@bobandtams 4 ай бұрын
Would you like all the torque specs for the job... It wasn't a how-to video. We recommend that everyone should check the specs for the bike you are working on. The was a 2014 CVO 110. I'm not sure what false readings you are speaking of
@darrinclem2502
@darrinclem2502 2 жыл бұрын
I would like to get to 1 for my 99 rk but didn’t c 1 listed.
@bobandtams
@bobandtams 2 жыл бұрын
Let me check give me all your info on your bike
@Darrells..
@Darrells.. 2 жыл бұрын
Out of stock online,probably be better get speeds install it anyway 👍👍
@bobandtams
@bobandtams 2 жыл бұрын
Very true
@raybrdjr
@raybrdjr 2 жыл бұрын
Sounds like compensator
@jerrym2321
@jerrym2321 6 ай бұрын
Gee wiz...for $18 replace the darn bolt. Do you understand what happens to metal when torqued repeatedly to 175 ft lbs? Cheap insurance.
@bobandtams
@bobandtams 6 ай бұрын
Good point, but really, you should replace all bolts that are torqued and should be replaced. Most major manufacturers recommend it. One rule is to look at the bolt to see if it looks stretched.
@jerrym2321
@jerrym2321 6 ай бұрын
@@bobandtams Mostly agree....low torque fasteners can be reused, but for me, anything over 100 ft lbs in a critical application should be used just once. Even if it never fails, just the piece of mind I have when riding hard is worth the small additional cost. We spend $2500 on clutch basket and compensator....what's a few more dollars to alleviate worry.
@TrishPrice
@TrishPrice 22 күн бұрын
It is rather irritating that we're talking crank runouts of .004" to .010" on a $30K bike.
@bobandtams
@bobandtams 21 күн бұрын
You are right
@jameslaperouse6132
@jameslaperouse6132 2 жыл бұрын
👍
@bobandtams
@bobandtams 2 жыл бұрын
Thanks
@springers4ever
@springers4ever Жыл бұрын
r u serious ...you dont even crank it up after the install ...really !!!
@bobandtams
@bobandtams Жыл бұрын
Yes we started it and rode it away. If you want to hear it you can check the Myrtle Beach Rally rode it all the time
@freebehindbars8654
@freebehindbars8654 9 ай бұрын
@@bobandtamsObviously talking about showing it. Usually install videos show results, it’s supposed to be common sense. No offense intended.
@bobandtams
@bobandtams 9 ай бұрын
@@freebehindbars8654 you can see ither videos of us riding the bike to hear it
@kennethwise7108
@kennethwise7108 Жыл бұрын
Nothing for Evo bikes 😢
@bobandtams
@bobandtams Жыл бұрын
sorry
@kennethwise7108
@kennethwise7108 Жыл бұрын
@@bobandtams hard to believe that the aftermarket has totally forgotten about the Shovelheads and Evo's
@bobandtams
@bobandtams Жыл бұрын
@@kennethwise7108 seems most after market is 2014 and up
@skippyjones4195
@skippyjones4195 2 жыл бұрын
Hey Guys ❤️💪🏻
@bobandtams
@bobandtams 2 жыл бұрын
👍👍👍👍
@joeparker8853
@joeparker8853 Жыл бұрын
Motor Co. puts a compensator in for a reason to absorb engine pulse , take it out something else has to do it, say no more.
@bobandtams
@bobandtams Жыл бұрын
Thanks for the comment
@mvrigger
@mvrigger Жыл бұрын
they clearly mention in the video that it has a cushion drive to absorb that
@joeparker8853
@joeparker8853 Жыл бұрын
@@mvrigger Yeah thats what they say, didn't like it in my ride, went with the S E comp bike is smooth and this is even a better price.
@heraldlee8112
@heraldlee8112 Жыл бұрын
Change out chain tenisoner
@bobandtams
@bobandtams Жыл бұрын
Went with screaming eagle one
@mark-1234
@mark-1234 8 ай бұрын
Not a really completely informative video here. One, there's no mention of cost. Two, there's also no real explanation of what is meant by this "rotor" replacement. I'm assuming he's talking about the stator rotor. If so, what I'm seeing in this video doesn't look removable. More info or an example would have been nice.
@bobandtams
@bobandtams 7 ай бұрын
We will have an update on your questions on up coming video. Meeting with them Wednesday
@kurtfoulke5130
@kurtfoulke5130 Ай бұрын
Does that tech really need to be using an impact while you are recording this ? Fucking annoying ! I'm out 👋
@bobandtams
@bobandtams Ай бұрын
Sorry, it's tough when filming in a shop that's open for business
@Gio-X-Man
@Gio-X-Man 5 ай бұрын
Sound Sucks
@bobandtams
@bobandtams 5 ай бұрын
Sorry maybe you could do one
@bobloblaw2754
@bobloblaw2754 3 ай бұрын
Why are you doing a video with guys in the background making all kinds of noise...come on guys!!! Jeesus
@bobandtams
@bobandtams 3 ай бұрын
It's the price for shooting live. We don't have the advantage of retakes. It's like vlogging
@skippyjones4195
@skippyjones4195 2 жыл бұрын
Hey Guys ❤️💪🏻
@bobandtams
@bobandtams 2 жыл бұрын
Hey Skippy
Compensators For Your Harley...Should You Eliminate Them?
13:36
Kevin Baxter
Рет қаралды 120 М.
Flipping Robot vs Heavier And Heavier Objects
00:34
Mark Rober
Рет қаралды 59 МЛН
My Daughter's Dumplings Are Filled With Coins #funny #cute #comedy
00:18
Funny daughter's daily life
Рет қаралды 32 МЛН
龟兔赛跑:好可爱的小乌龟#short #angel #clown
01:00
Super Beauty team
Рет қаралды 30 МЛН
I Bought the Cheapest V8 Motorcycle ever
37:50
Bikes and Beards
Рет қаралды 1 МЛН
2007 Harley-Davidson Ultra Classic Compensator Blues
14:02
Bobberbob
Рет қаралды 37 М.
Installing MOTORCYCLED DROP GUARDS #harleydavidson #motorcycledropguards
13:17
Why you Should NEVER Buy an Orange County Chopper
22:23
Bikes and Beards
Рет қаралды 6 МЛН
Protect Your Harley M8 Bagger Primary: Essential Upgrades Revealed!
28:40
Unfixable Diesel Bike is Worse Than We Thought(So I Got The Engineer Who Designed It)
30:19
Factory to SE Compensator Swap: Part 1 - The Teardown
26:12
Mark Young - Outside The Box
Рет қаралды 199 М.
Harley's Automatic Primary Tensioners are a Real Issue
11:48
GixxerFoo
Рет қаралды 80 М.
Flipping Robot vs Heavier And Heavier Objects
00:34
Mark Rober
Рет қаралды 59 МЛН