Fixing an electrical issue with the bucket controls in a bobcat 864 tracked skid steer.
Пікірлер: 150
@cat637d6 жыл бұрын
You have a sharp eye, most would have missed that very small detail. The machine you have was Bobcats first track loader and they have a few inherent issues. Be sure to change the outer bearing lube regularly on the drive motors, rebuilding them is an expensive pain! With good maintenance it should go 4000 hrs or more.
@robertsutphen23335 жыл бұрын
Good eye Andrew ! I watched this video today....and after the entire series on that green house....it makes me realize just how patient a guy you are but working alone has its benefits : ONE...being able to vent without anyone hearing it and TWO ...not having to apologize to anyone but yourself 🙃
@donc816 жыл бұрын
Good job finding that. It always feels good fixing a ongoing problem
@finksies236 жыл бұрын
My new favorite channel. You got some serious skills. Keep up the great work and interesting content.
@MrWuku13375 жыл бұрын
Is there anything you can't fix? Jesus Christ. Absolute legend
@dloglesby574 жыл бұрын
so glad that you finally got rid of this bobcat and finally replaced it with another skidsteer that has given you less trouble than the bobcat...
@horstszibulski196 жыл бұрын
Hope that this will solve the problem over time! Nice progress on the build too! Thx for the vid! :-)
@dejayrezme86176 жыл бұрын
"I've been having an issue with this ... for a while" haha I think this is how half your videos start :D
@matwalker63365 жыл бұрын
He does let an issue go a while doesn't he. LOL but I admit it is easier to find something that is "broke" as apposed to looking for something that does not work quite right.
@TheOboeCrack5 жыл бұрын
Or "I'm on this job here today"
@lukehaak59073 жыл бұрын
Don’t act like you fix it right away as it happens
@Military-Museum-LP6 жыл бұрын
That finished well. I'm never that lucky on electrical problems. I see these people got their house up. Looks nice.
@jimargeropoulos83096 жыл бұрын
Great video. Thanks for live troubleshooting
@DeerParkFarmstead6 жыл бұрын
You sure are a patient guy. It paid off for sure. Saved some $$$. Well done. That error would’ve bugged the shit out of me too.
@dhejdkdkdebjejdjdjs35236 жыл бұрын
I'm so sick of these Bobcat criminals!!! I can't wait for an active shooter at Bobcat engineering!!!! Fuck you!!!
@lukewurtz15964 жыл бұрын
We Have the same problem on our Bobcats; I will check if it works on our skids. Thanks for the upload
@leol16826 жыл бұрын
Good job on finding whate was roung with the Bobcat .
@odc430546 жыл бұрын
Electrical problems are so frustrating. House is coming along nicely. 👍
@AndrewCamarata6 жыл бұрын
Thanks, there's a few other house videos coming out soon. This one was just quick and easy to edit.
@CodyBerdinis5 жыл бұрын
FYI that Deutsch connector was missing the wedgelock that keeps the pins in line
@flat6fever680 Жыл бұрын
Yes
@freesh56894 жыл бұрын
After binge watching all ur vids I gotta say I find it funny how this bobcat gives u problems frequently but the Japanese cl35 one has yet to be in a repair vid lol
@crashwrench6 жыл бұрын
code 32-33 Is a open circuit in the left Joystick Handle upper half with the buttons
@AndrewCamarata6 жыл бұрын
There's better tech support on KZbin than anywhere else.
@matwalker63365 жыл бұрын
You said it.... we are all on your side here is why. might be stupid ideas but we are all trying to help... the guy on the help line just wants you to go away so he can answer another call....
@AJShoemaster4 жыл бұрын
What about code 32-31? It still says its the actuator but was wondering if you had anymore info
@steveparker39366 жыл бұрын
GREAT VIDEO OF A LOGICAL THINKER.
@harryjnr23356 жыл бұрын
Nice fix Andrew
@markkopf75266 жыл бұрын
Good find Andrew!
@precisionfilms37776 жыл бұрын
Something to look at on the G series machines is that fuse box that is right below the seat like between your legs. It seems to leak water and the fuses get just a little bit of corrosion and will cause things to go off and on. Ive had the traction not want to relese. Ive had the alternator not charge the battery.
@John985124 жыл бұрын
Great job, Andrew!
@davevanden15 жыл бұрын
Hey Andrew, I just bought a 753 bobcat and it has this problem so i am going to check what you have done . Thanks man
@AndrewCamarata5 жыл бұрын
Yeah, this was a loose connection in the handle control. Its been working fine since than.
@davevanden15 жыл бұрын
The machine is coming tomorrow, I got a really good deal on it cause of the problem . So that will be the first thing i check it just turned 2000 hrs
@chrishelms19675 жыл бұрын
Gotta love it when you catch it and its free
@cuznjo16 жыл бұрын
another person i watched had to replace the joy stick for the same reason, and that little control stick was over 1k. i hope that you found the problem
@arkansas13366 жыл бұрын
I just replaced the multiple wiring harnesses (several) on a bobcat skid steer, a rodent problem ($11,000.00+). You do not want to start doing ANY major electrical work on your machine unless you have it in a shop with plenty of your tools handy......and prepared for a lot of down time. In my case it was a 'rat's nest', literally, but covered by insurance! ....13 P. S. The wiring jackets are made with a vegetable base oil, thus the rats!!!!!!!!!!!!!!!!!
@arkansas13366 жыл бұрын
Bravo4699 --- Ha, it was a two year old machine and the finance company required that I have full coverage and I'm glad I did!
@mikebultema25365 жыл бұрын
It was a bad year for me with wires and rats! My dealer mechanic suggested liquid soap mixed with water to spray on any areas rats like to chew. So far so good.
@edwardgarea76504 жыл бұрын
Bobcat used to make an excellent machine ( I can remember when Clark equipment owned it. I think it originally was supposed to be under the Michigan label, but the Bobcat name caught on like wild fire. An advertising home run.) ... until Ingersoll-Rand bought it. The the quality went straight downhill. Hoping the new owners, Doosan, can turn it around.
@SuperActionForceGo4 жыл бұрын
When I hear “I’ve gotta start taking things off” I start getting prepared for AC to strip down the entire machine into the components of air, oxygen and water 👍🏼👍🏼👍🏼👍🏼
@frankviera27376 жыл бұрын
good find
@samuelbacon15966 жыл бұрын
Andy you got lucky. On your fix. Back in the day. I owned. A brand new 773. High flow. 2001 . I had one 1/4 hours on the machine. Between 14/15 years old everything started to come apart. Had problems with the bucket. Just like your's. But I had the front door with the alarm on it. Which does the same thing to the bucket,,,,, does not let the bucket come up. When the door is open.i learn over the years BOBCAT SKIDSTEER. DONT LIKE RAIN OR SITTING OUT SIDE ALL THE TIME. IT JUST CHEW THEM UP. I HAD TO SPEND 2300.00 dollars on my skidsteer just before I shipped it down the road to someone else . Had to put a new keyless key pad. Plus the brain box. Plus MR BOBCAT WRENCH. CAME OUT TO SET THINGS RIGHT. TO MAKE SURE NO OTHER PROBLEMS. FYI TO YOU!!!!!!!!!!!! GO IN TO TRACTOR SUPPLY BUY A NEW HEAVY DUTY TARP. COVER THE MACHINE KEEP THE WEATHER OUT AND OFF EVERYTHING ONCE AGAIN. HAT OFF TO THE FIX. PS HEAR THE REAL NEW BOBCAT ARE JUNK. LOOKING AT KUBOTA. SSV65. Or caseSV185. For next new machine. Good luck JUNKMANDO
@AndrewCamarata6 жыл бұрын
Yeah, good call. I'm not too impressed with the reliability of the bobcat, its nice when its working good though. At least it was cheaper than those other machines.
@Miguel1991176 жыл бұрын
Nice work MAN! I Like YOU work and your Vídeos ! I have 1 miniexcavator and 1 Dumper and i do the same fithings as you du , and i Want to buy an Bobcat good Luck
@ramosel6 жыл бұрын
Bobcats are notoriously problematic with their fuse holders. My neighbor had the same issue on a T190. Pulled the fuse for that circuit and cleaned the contacts and the fuse and the problem has been gone since. We subsequently did all the rest of the fuses and he said it hasn't run that well since it was new.
@mikethespikemorgan6 жыл бұрын
Well done on the fix, it must save you lot of time and money being your own mechanic. How are you getting on with the vlog on your background of wrenching and machinery operating.
@Tyler_Koehn6 жыл бұрын
Hope that fixes it. Phantom problems are the worst followed by broken wires.
@glenngoodale17096 жыл бұрын
Wow 43K subs .... everytime you post a new video, it goes up
@PatrickWagz5 жыл бұрын
303K now!!
@middlelinebacker576 жыл бұрын
Could you do a video on how you find all the equipment you have and what you look for when you're buying equipment. Also how you got started running your own business, like how you learned everything and different types of jobs you had before?
@AndrewCamarata6 жыл бұрын
Yes, I am working on that video now.
@regsparkes65076 жыл бұрын
If this were my machine, and I had to take this fault to the Dealer to repair, I wonder what I would have been charged with ?? That's where you are lucky Andrew, you're one of us, who can fix our own machines .
@WAVETUBE844 жыл бұрын
Victorious! Did you do the "touch down" dance? Grab your pants and say, "How ya like me now?"
@1whitetailnut16 жыл бұрын
Those are deutch connectors and it should have a green or orange lock wedge that holds the pins in place.
@AndrewCamarata6 жыл бұрын
I think your right, I at least have the pins into each other now. I think they were just next to each other before.
@adamthomas73676 жыл бұрын
That plug should have a cap and a seal around it to hold the pins in place would recommend replacing or repair the plug ends
@ronhart41665 жыл бұрын
Andrew now that you have the portable hot power washer. Can it be used to clean the tracks at the end of the day ? Or will the water cause freezing ?
@MrKaaaarl5 жыл бұрын
There should be an orange pastic thing that holds the pinns in place. Go to your dealer and get one, Bobcat has boxes of connectors and pinns we can buy, with all of those plastic things inside. And im guessing they have one too. If you dont it will happen again. If you have an accutator problem it will affect one function, the tilt or the lift.
@AndrewCamarata5 жыл бұрын
Yeah, I should, its been fine since I did that though.
@davidshowalter58086 жыл бұрын
That saved you a lot of money
@michaelovitch5 жыл бұрын
Bobcat Loader error codes: LOADER XX-XX Codes Bobcat Controller Code Description 01-16 Air Filter Not Connected 01-17 Air Filter Plugged 02-16 Hydraulic Implement Filter Not Connected 02-17 Hydraulic Implement Filter Plugged 03-09 Battery Voltage Low 03-10 Battery Voltage High 03-11 Battery Voltage Extremely High 03-14 Battery Voltage Extremely Low 03-22 Battery Voltage Out of Range Low 04-09 Engine Oil Pressure Low 04-14 Engine Oil Pressure Extremely Low 04-15 Engine Oil Pressure In Shutdown 04-21 Engine Oil Pressure Out Of Range High 04-22 Engine Oil Pressure Out Of Range Low 05-09 Hydraulic Charge Pressure Low 05-10 Hydraulic Charge Pressure High 05-11 Hydraulic Charge Pressure Extremely High 05-14 Hydraulic Charge Pressure Extremely Low 05-15 Hydraulic Charge Pressure In Shutdown 05-21 Hydraulic Charge Pressure Out Of Range High 05-22 Hydraulic Charge Pressure Out Of Range Low 06-10 Engine Speed High 06-11 Engine Speed Extremely High 06-13 Engine Speed No Signal 06-15 Engine Speed In Shutdown 06-18 Engine Speed Out Of Range 07-10 Hydraulic Oil Temperature High 07-11 Hydraulic Oil Temperature Extremely High 07-15 Hydraulic Oil Temperature In Shutdown 07-21 Hydraulic Oil Temperature Out Of Range High 07-22 Hydraulic Oil Temperature Out Of Range Low 08-10 Engine Coolant Temperature High 08-11 Engine Coolant Temperature Extremely High 08-15 Engine Coolant Temperature In Shutdown 08-21 Engine Coolant Temperature Out Of Range High 08-22 Engine Coolant Temp Out Of Range Low 09-09 Fuel Level Low 09-21 Fuel Level Out Of Range High 09-22 Fuel Level Out Of Range Low 10-16 Hydraulic Charge Filter Not Connected 10-17 Hydraulic Charge Filter Plugged 11-05 Seat Bar Sensor Short To Battery 11-06 Seat Bar Sensor Short To Ground 12-21 Front Auxiliary Thumb Paddle Switch Out Of Range High 12-22 Front Auxiliary Thumb Paddle Switch Out Of Range Low 12-23 Front Auxiliary PWM Switch Not In Neutral 13-05 Fuel Shutoff Hold Coil Short To Battery 13-06 Fuel Shutoff Hold Solenoid Short To Ground 13-07 Fuel Shutoff Hold Solenoid Open Circuit 14-02 Fuel Shutoff Pull Coil Error On 14-03 Fuel Shutoff Pull Coil Error Off 15-02 Traction Lock Pull Coil Error On 15-03 Traction Lock Pull Coil Error Off 16-05 Traction Lock Hold Coil Short To Battery 16-06 Traction Lock Hold Coil Short To Ground 16-07 Traction Lock Hold Solenoid Open Circuit 17-05 Hydraulic Lock Solenoid Short To Battery 17-06 Hydraulic Lock Solenoid Short To Ground 17-07 Hydraulic Lock Solenoid Open Circuit 18-05 Spool Lock Coil Short To Battery 18-06 Spool Lock Coil Short To Ground 18-07 Spool Lock Coil Open Circuit 19-02 Bucket Position Solenoid Error On 19-03 Bucket Position Solenoid Error Off 20-02 Two Speed Solenoid Error On 20-03 Two Speed Solenoid Error Off 21-02 Glow Plug Error On 21-03 Glow Plug Error Off 22-02 Starter Error On 22-03 Starter Error Off 23-02 Rear Base Solenoid Error On 23-03 Rear Base Solenoid Error Off 24-02 Rear Rod Solenoid Error On Bobcat Controller (Cont'd) Code Description 24-03 Rear Rod Solenoid Error Off 25-02 Rear Auxiliary Relief Solenoid Error On 25-03 Rear Auxiliary Relief Solenoid Error Off 26-02 Front Base Solenoid Error On 26-03 Front Base Solenoid Error Off 27-02 Front Rod Solenoid Error On 27-03 Front Rod Solenoid Error Off 28-02 Diverter Solenoid Error On 28-03 Diverter Solenoid Error Off 29-02 High Flow Solenoid Error On 29-03 High Flow Solenoid Error Off 30-28 Controller Memory Failure 31-28 Interrupted Power 33-23 Bobcat Controller Not Programmed 34-04 Deluxe Panel In Error 35-02 Hydraulic Fan Error On 35-03 Hydraulic Fan Error Off 36-48 Multiple ACDs Present 37-02 Two Speed Make-up Solenoid Error On 37-03 Two Speed Make-up Error Off 37-07 Two Speed Secondary Solenoid Open Circuit 39-04 Left Joystick Switches In Error 39-12 Left CAN Joystick Thumb Paddle Switch Not In Neutral 39-13 Left CAN Joystick Grip No Communication 39-16 Left CAN Joystick Base No Communication 39-28 Left CAN Joystick Internal Failure 39-48 Left CAN Joystick Multiple 40-04 Right Joystick Switches In Error 40-12 Right CAN Joystick Thumb Paddle Switch Not In Neutral 40-13 Right CAN Joystick Grip No Communication 40-16 Right CAN Joystick Base No Communication 40-28 Right CAN Joystick Internal Failure 40-48 Right CAN Joystick Multiple 41-09 Alternator Low Output 41-10 Alternator Voltage High 41-11 Alternator Voltage Extremely High 44-02 Horn Relay Error On 44-03 Horn Relay Error Off 45-02 Right Blinker Relay Error On 45-03 Right Blinker Relay Error Off 46-02 Left Blinker Relay Error On 46-03 Left Blinker Relay Error Off 47-21 8 Volt Sensor Supply Out Of Range High 47-22 8 Volt Sensor Supply Out Of Range Low 48-02 Front Light Relay Error On 48-03 Front Light Relay Error Off 49-02 Rear Light Relay Error On 49-03 Rear Light Relay Error Off 60-21 Rear Auxiliary Control Out Of Range High 60-22 Rear Auxiliary Control Out Of Range Low 60-23 Rear Auxiliary Control Not In Neutral 64-02 Switched Power Relay Error On 64-03 Switched Power Relay Error Off 74-72 Main Bobcat Controller In Boot Code 76-73 Left Display Panel System Rx In Error 77-48 Key Switch Multiple 78-74 Door / Transport Lock Open / Active 80-02 ACD/RACD Output "A" Error On 80-03 ACD/RACD Output "A" Error Off 81-02 ACD/RACD Output "B" Error On 81-03 ACD/RACD Output "B" Error Off 82-02 ACD/RACD Output "C" Error On 82-03 ACD/RACD Output "C" Error Off 83-02 ACD/RACD Output "D" Error On 83-03 ACD/RACD Output "D" Error Off 84-02 ACD/RACD Output "E" Error On 84-03 ACD/RACD Output "E" Error Off 85-02 ACD/RACD Output "F" Error On 85-03 ACD/RACD Output "F" Error Off 86-02 ACD/RACD Output "G" Error On 86-03 ACD/RACD Output "G" Error Off 87-02 ACD/RACD Output "H" Error On 87-03 ACD/RACD Output "H" Error Off Update June 2009 LOADER
@michaelovitch5 жыл бұрын
XX-XX Codes ACS Controller Code Description 32-04 No Communication From ACS Controller 32-23 ACS Controller Not Calibrated 32-24 ACS Controller Calibration Performed 32-25 ACS Controller Calibration Failure 32-31 ACS / AHC Tilt Actuator Fault 32-32 AHC Tilt Actuator Wiring Fault 32-33 AHC Tilt Handle Wiring Fault 32-34 ACS / AHC Tilt Actuator Not In Neutral 32-35 ACS / AHC Tilt Handle / Pedal Not In Neutral, SJC Right Joystick X-axis Not In Neutral 32-36 ACS / AHC Lift Actuator Fault 32-37 AHC Lift Actuator Wiring Fault 32-38 AHC Lift Handle Wiring Fault 32-39 ACS / AHC Lift Actuator Not In Neutral 32-40 ACS / AHC Lift Handle / Pedal Not In Neutral, SJC Right Joystick Y-axis Not In Neutral 32-41 AHC Controller No Communication 32-49 ACS Lift Actuator Short To Ground (Error Off) 32-50 ACS Tilt Actuator Short To Ground (Error Off) 32-51 ACS Lift Actuator Short To Battery (Error On) 32-52 ACS Tilt Actuator Short To Battery (Error On) 32-53 ACS Lift Handle / Pedal Short To Ground, SJC Right Joystick Y-axis Short To Ground 32-54 ACS Tilt Handle / Pedal Short To Ground, SJC Right Joystick X-axis Short To Ground 32-55 ACS Lift Handle / Pedal Short To Battery, SJC Right Joystick Y-axis Short To Battery 32-56 ACS Tilt Handle Pedal Short To Battery, SJC Right Joystick X-axis Short To Battery 32-57 ACS Lift Actuator Reduced Performance 32-58 ACS Tilt Actuator Reduced Performance 32-59 ACS Lift Actuator Wrong Direction 32-60 ACS Tilt Actuator Wrong Direction 32-61 ACS Handle Lock Short To Ground 32-62 ACS Handle Lock Short To Battery 32-63 ACS Pedal Lock Short To Ground 32-64 ACS Pedal Lock Short To Battery 32-65 ACS Sensor Supply Voltage Out Of Range 32-66 ACS Battery Voltage Out Of Range 32-67 ACS Operating Mode Switch Flipped While Operating 32-68 ACS Lift Handle Information Error 32-70 Right Joystick Y-axis Out Of Range Low 32-71 Right Joystick Y-axis Out Of Range High 32-75 Interrupted Un-switched Power 32-76 CAN Joystick Information Error 32-97 ACS Controller Programmed 40-05 Right CAN Joystick X-axis Not In Neutral 40-07 Right CAN Joystick Y-axis Not In Neutral A
@michaelovitch5 жыл бұрын
WS-SJC Controller Code Description 38-01 CAN Joystick Information Error 38-02 Remote Control Information Error 38-03 Actuator Calibration Failure 38-04 AWS/SJC Controller No Communication 38-05 Left Analog Joystick X-Axis Not In Neutral 38-06 Right Analog Joystick X-Axis Not In Neutral 38-07 Left Analog Joystick Y-Axis Not In Neutral 38-08 Right Joystick Y-Axis Not In Neutral 38-09 Operating Mode Switch Short to Ground or Battery 38-10 Actuator Calibration Performed 38-11 AWS / SJC Lift Actuator Not In Neutral 38-12 AWS / SJC Tilt Actuator Not In Neutral 38-13 AWS / SJC Lift Actuator Fault 38-14 AWS / SJC Tilt Actuator Fault 38-15 AWS / SJC Right Wheel Speed Fault 38-16 AWS / SJC Left Wheel Speed Fault 38-17 AWS / SJC Tilt Actuator Reduced Performance 38-18 AWS / SJC Lift Actuator Reduced Performance 38-19 Left Joystick X-Axis Out Of Range High 38-20 Right Joystick X-Axis Out Of Range High 38-21 Left Joystick Y-Axis Out Of Range High 38-22 Right Joystick Y-Axis Out Of Range High 38-23 Right Front Steering Sensor Out Of Range High 38-24 Left Front Steering Sensor Out Of Range High 38-25 Right Rear Steering Sensor Out Of Range High A WS-SJC Controller (Cont'd) Code Description 38-26 Left Rear Steering Sensor Out Of Range High 38-27 AWS / SJC Lift Actuator Out Of Range High 38-28 AWS / SJC Tilt Actuator Out Of Range High 38-29 Left Joystick X-Axis Out Of Range Low 38-30 Right Joystick X-axis Out Of Range Low 38-31 Left Joystick Y-Axis Out Of Range Low 38-32 Right Joystick Y-Axis Out Of Range Low 38-33 Right Front Steering Sensor Out Of Range Low 38-34 Left Front Steering Sensor Out Of Range Low 38-35 Right Rear Steering Sensor Out Of Range Low 38-36 Left Rear Steering Sensor Out Of Range Low 38-37 5 Volt Sensor Supply 1 Out Of Range Low 38-38 5 Volt Sensor Supply 2 Out Of Range Low 38-39 AWS / SJC Lift Actuator Short To Ground 38-40 AWS / SJC Tilt Actuator Short To Ground 38-41 Tilt Actuator Wrong Direction 38-42 Lift Actuator Wrong Direction 38-43 Left Forward Drive Solenoid Error On 38-44 Left Reverse Drive Solenoid Error On 38-45 Right Forward Drive Solenoid Error On 38-46 Right Reverse Drive Solenoid Error On 38-47 Right Front Steering Solenoid Error On 38-48 Left Front Steering Solenoid Error On 38-49 Right Rear Steering Solenoid Error On 38-50 Left Rear Steering Solenoid Error On 38-51 Pressure Control Steering Solenoid Error On 38-52 Backup Alarm Error On 38-53 Left Forward Drive Solenoid Error Off 38-54 Left Reverse Drive Solenoid Error Off 38-55 Right Forward Drive Solenoid Error Off 38-56 Right Reverse Drive Solenoid Error Off 38-57 Right Front Extend Steering Solenoid Error Off 38-58 Right Front Retract Steering Solenoid Error Off 38-59 Left Front Extend Steering Solenoid Error Off 38-60 Left Front Retract Steering Solenoid Error Off 38-61 Right Rear Extend Steering Solenoid Error Off 38-62 Right Rear Retract Steering Solenoid Error Off 38-63 Left Rear Extend Steering Solenoid Error Off 38-64 Left Rear Retract Steering Solenoid Error Off 38-65 Pressure Control Steering Solenoid Error Off 38-66 Backup Alarm Short To Ground 38-67 No Communication From Bobcat Controller 38-68 Wheel Angle Sensors Not Calibrated 38-69 AWS / SJC Controller Not Calibrated 38-70 Interrupted Power 38-71 Battery Voltage Out Of Range 38-72 Drive Pump Not Calibrated 38-73 Operating Mode Switch Pressed While Operating 38-74 Right Wheel Speed Uncommanded Motion 38-75 Left Wheel Speed Uncommanded Motion 38-85 5.0 Volt Sensor Supply 1 Out Of Range High 38-86 Sensor Supply 2 Out Of Range High 38-87 Right Front Steering Solenoid Error 38-88 Left Front Steering Solenoid Error 38-89 Right Rear Steering Solenoid Error 38-90 Left Rear Steering Solenoid Error 38-93 Right Speed Sensor Unresponsive 38-94 Left Speed Sensor Unresponsive 38-95 Left Speed Sensor Reverse Direction 38-96 Right Speed Sensor Reverse Direction 38-97 AWS/SJC Controller Programmed 38-98 Controller In Drive Calibration Mode 38-99 AWS Controller In Wheel Position Calibration Mode 39-05 Left CAN Joystick X-axis Not In Neutral 39-07 Left CAN Joystick Y-axis Not In Neutral 40-05 Right CAN Joystick X-axis Not In Neutral 40-07 Right CAN Joystick Y-axis Not In Neutral Update June 2009 LOADER
@michaelovitch5 жыл бұрын
XX-XX Codes SSL Drive / Drive Plus Controller Code Description 39-05 Left CAN Joystick X-axis Not In Neutral 39-07 Left CAN Joystick Y-axis Not In Neutral 75-01 CAN Joystick Information Error 75-04 No Communication From Drive Controller 75-05 Left Joystick X-axis Not In Neutral Left (ISO Mode Only) 75-07 Left Joystick Y-axis Not In Neutral 75-08 Right Joystick Y-axis Not In Neutral (H-Pattern Only) 75-09 Operating Mode Switch Short To Ground Or Battery 75-13 Right Front Wheel Unresponsive 75-14 Left Front Wheel Unresponsive 75-15 Right Rear Wheel Unresponsive 75-16 Left Rear Wheel Unresponsive 75-17 Left Swash Plate Not In Neutral 75-18 Right Swash Plate Not In Neutral 75-19 Left Joystick X-axis Out Of Range High 75-21 Left Joystick Y-axis Out Of Range High 75-23 Right Front Steering Sensor Out Of Range High 75-24 Left Front Steering Sensor Out Of Range High 75-25 Right Rear Steering Sensor Out Of Range High 75-26 Left Rear Steering Sensor Out Of Range High 75-27 Left Swash Plate Out Of Position 75-28 Right Swash Plate Out Of Position 75-29 Left Joystick X-axis Out Of Range Low 75-31 Left Joystick Y-axis Out Of Range Low 75-33 Right Front Steering Sensor Out Of Range Low 75-34 Left Front Steering Sensor Out Of Range Low 75-35 Right Rear Steering Sensor Out Of Range Low 75-36 Left Rear Steering Sensor Out Of Range Low 75-37 5.0 Volt Sensor Supply 1 Out Of Range Low 75-38 5 Volt Sensor Supply 2 Out Of Range Low 75-39 Left Swash Plate Sensor Out Of Range High 75-40 Left Swash Plate Sensor Out Of Range Low 75-41 Right Swash Plate Sensor Out Of Range High 75-42 Right Swash Plate Sensor Out Of Range Low 75-43 Left Forward Drive Solenoid Error On 75-44 Left Reverse Drive Solenoid Error On 75-45 Right Forward Drive Solenoid Error On 75-46 Right Reverse Drive Solenoid Error On 75-47 Right Front Extend Steering Solenoid Error On 75-48 Left Front Extend Steering Solenoid Error On 75-49 Right Rear Extend Steering Solenoid Error On 75-50 Left Rear Extend Steering Solenoid Error On 75-51 Pressure Control Steering Solenoid Error On 75-52 Backup Alarm Error On 75-53 Left Forward Drive Solenoid Error Off 75-54 Left Reverse Drive Solenoid Error Off 75-55 Right Forward Drive Solenoid Error Off 75-56 Right Reverse Drive Solenoid Error Off 75-57 Right Front Extend Steering Solenoid Error Off 75-58 Right Front Retract Steering Solenoid Error Off 75-59 Left Front Extend Steering Solenoid Error Off 75-60 Left Front Retract Steering Solenoid Error Off 75-61 Right Rear Extend Steering Solenoid Error Off 75-62 Right Rear Retract Steering Solenoid Error Off 75-63 Left Rear Extend Steering Solenoid Error Off 75-64 Left Rear Retract Steering Solenoid Error Off 75-65 Pressure Control Steering Solenoid Error Off 75-66 Backup Alarm Error Off 75-67 No Communication From Bobcat Controller 75-68 Angle Sensors Not Calibrated 75-69 Battery Voltage Out Of Range High 75-70 Interrupted Power 75-71 Battery Voltage Out Of Range Low 75-72 Drive Pump - Not Calibrated 75-73 Operating Mode Switch Flipped While Operating 75-74 Right Wheel Speed Uncommanded Motion 75-75 Left Wheel Speed Uncommanded Motion 75-76 No Communication From ACS Controller 75-77 Left Speed Sensor Out Of Range High 75-78 Right Speed Sensor Out Of Range High 75-79 Left Speed Sensor Out Of Range Low 75-80 Right Speed Sensor Out Of Range Low 75-81 Right Front Retract Steering Solenoid Error On SSL Drive / Drive Plus Controller Code Description 75-82 Left Front Retract Steering Solenoid Error On 75-83 Right Rear Retract Steering Solenoid Error On 75-84 Left Rear Retract Steering Solenoid Error On 75-85 5.0 Volt Sensor Supply 1 Out Of Range High 75-86 Sensor Supply 2 Out Of Range High 75-87 Software Update Required 75-88 Switched Power Error On 75-91 Left Swash Plate Sensor - Reversed 75-92 Right Swash Plate Sensor - Reversed 75-93 Unresponsive Right Speed Sensor 75-94 Unresponsive Left Speed Sensor 75-95 Left Speed Sensor Reverse Direction 75-96 Right Speed Sensor Reverse Direction 75-97 Drive / Drive Plus Controller Programmed 75-98 Controller In Calibration Mode 75-99 Drive Plus Controller In Wheel Position Calibration Mode Update June 2009
@michaelovitch5 жыл бұрын
LOADER ALPHA-NUMERIC CODES Gateway Controller Code Description M0116 Air Filter Not Connected M0117 Air Filter Plugged M0216 Hydraulic Implement Filter Not Connected M0217 Hydraulic Implement Filter Plugged M0309 Battery Voltage Low M0310 Battery Voltage High M0311 Battery Voltage Extremely High M0314 Battery Voltage Extremely Low M0322 Battery Voltage Out Of Range Low M0409 Engine Oil Pressure Low M0414 Engine Oil Pressure Extremely Low M0415 Engine Oil Pressure In Shutdown M0421 Engine Oil Pressure Out Of Range High M0422 Engine Oil Pressure Out Of Range Low M0509 Hydraulic Charge Pressure Low M0510 Hydraulic Charge Pressure High M0511 Hydraulic Charge Pressure Extremely High M0514 Hydraulic Charge Pressure Extremely Low M0515 Hydraulic Charge Pressure In Shutdown M0521 Hydraulic Charge Pressure Out Of Range High M0522 Hydraulic Charge Pressure Out Of Range Low M0610 Engine Speed High M0611 Engine Speed Extremely High M0613 Engine Speed No Signal M0615 Engine Speed In Shutdown M0618 Engine Speed Out Of Range M0710 Hydraulic Oil Temperature High M0711 Hydraulic Oil Temperature Extremely High M0715 Hydraulic Oil Temperature In Shutdown M0721 Hydraulic Oil Temperature Out Of Range High M0722 Hydraulic Oil Temperature Out Of Range Low M0810 Engine Coolant Temperature High M0811 Engine Coolant Temperature Extremely High M0815 Engine Coolant Temperature In Shutdown M0821 Engine Coolant Temperature Out Of Range High M0822 Engine Coolant Temperature Out Of Range Low M0909 Fuel Level Low M0921 Fuel Level Out Of Range High M0922 Fuel Level Out Of Range Low M1016 Hydraulic Charge Filter Not Connected M1017 Hydraulic Charge Filter Plugged M1121 Seatbar Sensor Out Of Range High M1122 Seatbar Sensor Out Of Range Low M1305 Fuel Shutoff Hold Coil Short To Battery M1306 Fuel Shutoff Hold Coil Short To Ground M1307 Fuel Shutoff Hold Coil Open Circuit M1402 Fuel Pull Output Error On M1403 Fuel Pull Output Error Off M1407 Fuel Pull Output Open Circuit M1428 Fuel Pull Output Controller Failure M1502 Traction Lock Pull Output Error On M1503 Traction Lock Pull Output Error Off M1507 Traction Lock Pull Output Open Circuit M1528 Traction Lock Pull Output Controller Failure M1605 Traction Lock Hold Solenoid Short To Battery M1606 Traction Lock Hold Solenoid Short To Ground M1607 Traction Lock Hold Solenoid Open Circuit M1705 Hydraulic Lock Valve Solenoid Short To Battery M1706 Hydraulic Lock Valve Solenoid Short To Ground M1707 Hydraulic Lock Valve Solenoid Open Circuit M1732 Hydraulic Lock Valve Solenoid Over Current M1805 Lift Spool Lock Short To Battery M1806 Lift Spool Lock Short To Ground M1807 Lift Spool Lock Open Circuit M1832 Lift Spool Lock Solenoid Over Current M2005 Two Speed Solenoid Short To Battery M2006 Two Speed Solenoid Short To Ground M2007 Two Speed Solenoid Open Circuit M2032 Two Speed Solenoid Over Current M2102 Glow Plug Output Error On M2103 Glow Plug Output Error Off M2107 Glow Plug Output Open Circuit Gateway Controller (Cont'd) Code Description M2128 Glow Plug Output Controller Failure M2202 Starter Output Error On M2203 Starter Output Error Off M2207 Starter Output Open Circuit M2228 Starter Output Controller Failure M2302 Starter Relay Error On M2303 Starter Relay Error Off M2307 Starter Relay Open Circuit M2402 Fuel Pull Relay Error On M2403 Fuel Pull Relay Error Off M2407 Fuel Pull Output Open Circuit M2502 Traction Lock Relay Error On M2503 Traction Lock Pull Relay Error Off M2507 Traction Lock Output Open Circuit M2602 Glow Plug Relay Error On M2603 Glow Plug Relay Error Off M2607 Glow Plug Output Open Circuit M2805 Auxiliary Interlock Output Short To Battery M2806 Auxiliary Interlock Output Short To Ground M2807 Auxiliary Interlock Output Open Circuit M3028 Controller Memory Failure M3128 Interrupted Power Failure M3204 ACS In Error M3304 Deluxe Panel No Communication M3323 Gateway Controller Not Programmed M3404 Deluxe Panel No Communication M3505 Hydraulic Fan Solenoid Error On M3506 Hydraulic Fan Solenoid Error Off M3507 Hydraulic Fan Solenoid Open Circuit M3532 Hydraulic Fan Solenoid Over Current M3648 Multiple ACDs Present (Attachment Control Device) M3705 Two Speed Secondary Error On M3706 Two Speed Secondary Error Off M3707 Two Speed Secondary Solenoid Open Circuit M3732 Two Speed Secondary Over Current M4109 Alternator Low Output M4110 Alternator Voltage High M4404 Auxiliary Controller No Communication M4621 5 Volt Sensor Supply Out Of Range High M4622 5 Volt Sensor Supply Out Of Range Low M4721 8 Volt Sensor Supply Out Of Range High M4722 8 Volt Sensor Supply Out Of Range Low M4802 Front Light Relay Error On M4803 Front Light Relay Error Off M4807 Front Light Output Open Circuit M4902 Rear Light Relay Error On M4903 Rear Light Relay Error Off M4907 Rear Light Output Open Circuit M5002 Front Light Output Error On M5003 Front Light Output Error Off M5007 Front Light Output Open Circuit M5028 Front Light Output Controller Failure M5102 Rear Light Output Error On M5103 Rear Light Output Error Off M5107 Rear Light Output Open Circuit M5128 Front Light Output Controller Failure M5202 PTOL (Press To Operate Loader)Switch Error On M5221 PTOL Switch Out Of Range High M5222 PTOL Switch Out Of Range Low M5305 PTOL Led Short To Battery M5306 PTOL Led Short To Ground M5405 Tilt Spool Lock Short To Battery M5406 Tilt Spool Lock Short To Ground M5407 Tilt Spool Lock Open Circuit M5432 Tilt Spool Lock Over Current M6402 Switched Power Relay Error On M6403 Switched Power Relay Error Off M6407 Switched Power Output Open Circuit M7002 Switched Power Output Error On M7003 Switched Power Output Error Off M7007 Switched Power Output Open Circuit M7028 Switched Power Output Controller Failure Updated June 2009 LOADER ALP
@michaelovitch5 жыл бұрын
HA-NUMERIC CODES Gateway Controller (Cont'd) Code Description M7304 Remote Control Receiver No Communication M7423 Gateway Controller Not Programmed M7472 Gateway Controller In Boot Code M7504 Drive Controller No Communication M7604 Left Display Panel No Communication M7748 Key Switch Multiple M7974 Door Open Auxiliary Controller Code Description H1221 Front Auxiliary Thumb Paddle Switch Out Of Range High H1222 Front Auxiliary Thumb Paddle Switch Out Of Range Low H1224 Front Auxiliary Thumb Paddle Switch Not In Neutral H1324 Rear Auxiliary Thumb Paddle Switch Not In Neutral H2305 Rear Base Solenoid Shorted to Battery H2306 Rear Base Solenoid Short To Ground H2307 Rear Base Solenoid Open Circuit H2332 Rear Base Solenoid Over Current H2405 Rear Rod Solenoid Short To Battery H2406 Rear Rod Solenoid Short To Ground H2407 Rear Rod Solenoid Open Circuit H2432 Rear Rod Solenoid Over Current H2605 Front Base Solenoid Short To Battery H2606 Front Base Solenoid Short To Ground H2607 Front Base Solenoid Open Circuit H2632 Front Base Solenoid Over Current H2705 Front Rod Solenoid Short To Battery H2706 Front Rod Solenoid Short To Ground H2707 Front Rod Solenoid Open Circuit H2732 Front Rod Solenoid Over Current H2805 Diverter Solenoid Short To Battery H2806 Diverter Solenoid Short To Ground H2807 Diverter Solenoid Open Circuit H2905 High Flow Solenoid Short To Battery H2906 High Flow Solenoid Short To Ground H2907 High Flow Solenoid Open Circuit H2932 High Flow Solenoid Over Current H3028 Auxiliary Controller Memory Failure H3128 Interrupted Power Failure H3648 Multiple ACDs Present (Attachment Control Device) H3913 Left CAN Joystick Grip No Communication H3916 Left CAN Joystick Base No Communication H3928 Left CAN Joystick Internal Failure H3948 Left CAN Joystick Multiple H4013 Right CAN Joystick Grip No Communication H4016 Right CAN Joystick Base No Communication H4028 Right CAN Joystick Internal Failure H4048 Right CAN Joystick Multiple H4302 Horn Relay Error On H4303 Horn Relay Error Off H4423 Auxiliary Controller Not Programmed H4502 Right Blinker Error On H4503 Right Blinker Error Off H4602 Left Blinker Error On H4603 Left Blinker Error Off H4721 8 Volt Sensor Supply Out Of Range High H4722 8 Volt Sensor Supply Out Of Range Low H7404 Gateway Controller No Communication H7604 Left Display Panel No Communication ACD Controller Code Description A8002 ACD/RACD Output "A" Error On A8003 ACD/RACD Output "A" Error Off A8102 ACD/RACD Output "B" Error On A8103 ACD/RACD Output "B" Error Off A8202 ACD/RACD Output "C" Error On A8203 ACD/RACD Output "C" Error Off A8302 ACD/RACD Output "D" Error On A8303 ACD/RACD Output "D" Error Off A8402 ACD/RACD Output "E" Error On A8403 ACD/RACD Output "E" Error Off A8502 ACD/RACD Output "F" Error On A8503 ACD/RACD Output "F" Error Off A8602 ACD/RACD Output "G" Error On A8603 ACD/RACD Output "G" Error Off A8702 ACD/RACD Output "H" Error On A8703 ACD/RACD Output "H" Error Off ACS Controller Code Description W3223 ACS Controller Not Calibrated W3224 ACS Controller Calibration Successful W3225 ACS Controller Calibration Failure W3231 ACS Tilt Actuator Fault W3234 ACS Tilt Actuator Not In Neutral W3235 ACS Tilt Handle/Pedal Not In Neutral W3236 ACS Lift Actuator Fault W3239 ACS Lift Actuator Not In Neutral (ACS Only) W3240 ACS Lift Handle/Pedal Not In Neutral W3249 ACS Lift Actuator Short To Ground (Error Off) (ACS Only) W3250 ACS Tilt Actuator Short To Ground (Error Off) W3251 ACS Lift Actuator Short To Battery (Error On) (ACS Only) W3252 ACS Tilt Actuator Short To Battery (Error On) W3253 ACS Lift Handle/Pedal Short To Ground W3254 ACS Tilt Handle/Pedal Short To Ground W3255 ACS Lift Handle/Pedal Short To Battery W3256 ACS Tilt Handle/Pedal Short To Battery W3257 ACS Lift Actuator Reduced Performance W3258 ACS Tilt Actuator Reduced Performance W3259 ACS Lift Actuator Wrong Direction (ACS Only) W3260 ACS Tilt Actuator Wrong Direction W3261 ACS Handle Lock Short To Ground W3262 ACS Handle Lock Short To Battery W3263 ACS Pedal Lock Short To Ground W3264 ACS Pedal Lock Short To Battery W3265 ACS Sensor Supply Voltage Out Of Range (ACS Only) W3266 ACS Battery Voltage Out Of Range (ACS Only) W3267 ACS Operating Mode Switch Flipped While Operating W3275 Interrupted Un-switched Power W3276 CAN Joystick Information Error W3297 ACS Controller Programmed W3905 Left CAN Joystick X-axis Not In Neutral W4005 Right CAN Joystick X-axis Not In Neutral W4007 Right CAN Joystick Y-axis Not In Neutral Left Hand Panel Controller Code Description L0102 Lights Button Error On L0202 High Flow Button Error On L0302 Auxiliary Button Error On L0402 Information Button Error On L7404 Gateway Controller No Communication L7672 Left Hand Panel Programming Error Updated June 2009
@handlebullshit6 жыл бұрын
What a pain in the ass to work on.
@garyr1200gs4 жыл бұрын
there is a valve in the spool that is controlled by electric magnet that controls flow its regulated by computer being it can't be bypassed with 12v it functions on 12v but holds on lower volts or you will burn it up but you can remove the valve have machine shop cut the spool and put a shim in it and reseal it then you would have flow any time so bypassed the safety feature it will go down with motor off but it can only work if the engine runs you
@lostinlife6478666 жыл бұрын
Drive it, Shake it, like you rented it !!!! lol
@TheCuttingtorch6 жыл бұрын
Working on stuff in the cold really sucks!
@MattWeaver9094 жыл бұрын
DANIEL DESIGNS his shop isn’t heated or cooled
@Sugarkryptonite4 жыл бұрын
@@MattWeaver909 Why do you say it's not heated? Pretty sure it is.
@brenthernandez36323 жыл бұрын
@@Sugarkryptonite Nope he's said it himself
@JimHowDigsDirt6 жыл бұрын
I had the same problem with my 08 Bobcat T190 a few years ago. It turned out to be a bad actuator.
@AndrewCamarata6 жыл бұрын
Yeah, I initially though it was that. But the error code not changing when the plugs were switched said otherwise. I think that part was like $800?
@treeclimbing77986 жыл бұрын
Seemed like you got the Error when jiggling that control stick.
@AndrewCamarata6 жыл бұрын
Yeah, that was usually doing it right away. It was even doing it sometimes when running it smooth. At least I was sure it was the right control.
@padderickpeak94934 жыл бұрын
'that's what you gotta do shake the hell out of it' lol
@tonygriffiths24855 жыл бұрын
Connection fault ..... been there many times as a service engineer :) Good find.
@AndrewCamarata5 жыл бұрын
About the be another video on this topic. That machine has a similar problem. Its not that connector though.
@1944chevytruck3 жыл бұрын
thanks 4 video. be kind........
@bennyrlove5 жыл бұрын
what happened to hot water washer?
@3dservicesllc6 жыл бұрын
The lift tilt coil is the likely problem but a speed sensor problem will give you the same codes. A speed sensor would give you the same codes ,
@3dservicesllc6 жыл бұрын
the lift tilt coil is on top of the valve body closest to the front of the machine
@AndrewCamarata6 жыл бұрын
It was that pin. I haven't had a problem since I re-plugged that in, and I have been using that machine allot.
@dennishayes655 жыл бұрын
Andrew, don’t shake the Hell out of it TO much !!!
@michelwong12 жыл бұрын
👍👍👍.
@eformance6 жыл бұрын
Looks like that plug is missing the pin retainer. There should be a gray, or red (usually) plastic retainer that goes in the plug to retain the pins and keep them aligned. That's my story and I'm stickin' to it.
@AndrewCamarata6 жыл бұрын
I agree with you. I think that pin was just next to the socket before, now its in it. But your right, a part is missing.
@TheGeezzer5 жыл бұрын
🛠⛏🔨⚒🛠🔧🔩 < < The usual start to an Andrew Camarata video! 🚜
@tedkohn75776 жыл бұрын
You are a amazing mechanic and an expert operator,I enjoy watching you work. However, it seems that you spend more time repairing your old equipment then working on your jobs .
@Theking-yj3fj6 жыл бұрын
I have a few questions one you own your excavation company with just you no employees right. And how hard is that. Also can you list all of your equipment you own. Also how long have you owned you business. Thanks from Canada
@AndrewCamarata6 жыл бұрын
Yes, no employees. How hard is it? That's a good question, based on what? I like doing it, so I don't mind. I like it better than my previous job delivering mail. Its tough to pick a start date since it was a hobby that turned into a carrier, but I can say I left my previous job in 2011. I have skid steers, backhoe, dozer, dump truck, excavators, and all the little tools to keep them going.
@Theking-yj3fj6 жыл бұрын
Andrew Camarata that’s pretty cool you seem to be making pretty good money out of a hobby
@scottmccluremcclure39164 жыл бұрын
It's the computer acting up it will go out. I have seen the future Bahahaha
@vtajoe15 жыл бұрын
Looks like theres a wedge peace missing were the plug pins are inside the connector that you had unpluged.
@AndrewCamarata5 жыл бұрын
Yes, it got installed in a later video.
@phillipbonner52155 жыл бұрын
That must be a pain in the ass working in all that mud
@danst1656 жыл бұрын
Bobcat machines have the worst wiring issues that I have come across. I've seen super low hour machines with rub through wire problems, this should not happen. Cat machines made in the USA seem to have harnesses and securing that you could lift the machine by.
@AndrewCamarata6 жыл бұрын
Yeah, I would like a cat next. I'm not to impressed with the reliability of the bobcats.
@edbenson984 жыл бұрын
Get rid of the plugs and solder the wires directly together! No corrosion or loose connections! #AC
@AndrewCamarata4 жыл бұрын
I might, I did end up re-visiting this. And its still a problem with that machine. It should just be piolet control like every other machine so it stays working.
@randallhutchcraft40393 жыл бұрын
Sounds like a bad ground, it moves around , and just rusty or loose
@robertg88754 жыл бұрын
You can have a series on just the bobcat get rid of it!!!!
@AndrewCamarata4 жыл бұрын
Yeah. I wont buy any more Bobcats. All they do is break.
@MitzvosGolem15 жыл бұрын
convert to old school cables. Alot of expenses on computer and actuators failing .
@AndrewCamarata5 жыл бұрын
I might. IDK, I am ready to sell that machine. I am done with Bobcat brand. I got an IHI skid steer. I feel like it is going to be more reliable.
@deme70635 жыл бұрын
my ford 1920 series backhoe had electrical problems I traced back to some tiny ass micro pins in a wire connector under the dash that were starting to turn green. so freakin tiny that they were a bitch to scrape clean, but that did the trick. something to keep in mind
@matwalker63365 жыл бұрын
FK YA BUD! Damb you are a great mechanic. What you posses that the average guy does not is the ability to "think" I know you dont understand what I am saying because you can think. You see the average person can not think themselves out of a wet paper bag. It is up there with real world university studies that show when polled the people that think they are smart are NOT and those that think they are below or average are ABOVE average in intelligence. I watch your vids mostly for the mechanical stuff. I love machines. Watching you trouble shoot them is fascinating. I have an idea and at the same time you have the same one and start down that path. I would work for you for free just to play with the machines. Alas the I am as far away from you as I can be and still be in N. american. Vancouver island BC. YOU are awesome.... love the way you think.
@spacedoutm13203 жыл бұрын
I got a 1987 bobcat the ahc light comes on, when i try to lift the bucket, it wont lift it has no strenght anybody have an idea what it is, how i can fix it?
@AndrewCamarata3 жыл бұрын
I did another video on the subject that covered the diagnosing process much better, I ended up having to change the computer that time, the machine works most of the time now, but I still sometimes see that light, the trick is to just buy another brand machine.
@Kirsch6.73 жыл бұрын
Do you want to sell it?
@garethjudd58402 жыл бұрын
Bobcat goes wrong, = expensive repair bills.
@cameronellison99125 жыл бұрын
I would get a CAT skid
@AndrewCamarata5 жыл бұрын
I replaced this with an IHI
@Ramdodge5826 жыл бұрын
Pilot controls be better IMO
@AndrewCamarata6 жыл бұрын
Yeah, I agree. Bobcat screwed up on that one.
@michaeladams98074 жыл бұрын
Its always a Bobcat
@grahamsobieski25075 жыл бұрын
Where your headphones because it is so loud
@dloglesby574 жыл бұрын
Laughing here, Andrew: trying to run with wires mixed up:" there you go, gotta shake of hell out of it..as he is haking the controlls wildly.. One of onl;y VERY few videos where he swears ..
@jimjim7533 жыл бұрын
Clean the grounds on neg. Battery post...will fix 95% of faults.. ....
@jakewalter37294 жыл бұрын
Hu
@jakewalter37295 жыл бұрын
The
@LEJMADK6 жыл бұрын
typical 2000 hour problem on bobcat... this is just the start of a lot of problems !! it is a never ending story and money pit..
@MrJeffdahmer6 жыл бұрын
LEJMA Maskin udlejning and let me guess this would never happen on one of your machines?
@LEJMADK6 жыл бұрын
Kurt, just the opposite.. i had it happen on a bobcat t190... just keept bleeding money.. spent about 15.000usd in one year on repairs... got rid of it in the end
@AndrewCamarata6 жыл бұрын
Yeah, this thing should not have electronic controls for those valves. A crappy design. Once a machine continually breaks is when I sell it. This one has been good though. I consider 2000 hours low though. I have other machines with triple that.
@CoastConcreteCorp6 жыл бұрын
Andrew Camarata my father got over 5k from his 864 issue free before it started dying. Although he has hand and foot control only. The issue is the electric for the AHC was problematic in the beginning. I wanted it in my Loader and my dealer wouldn't let me get it. It is better in the newer machines.
@precisionfilms37776 жыл бұрын
Those codes are a lifesaver. Ive always been able to fix my 2 763s by process of elimination and the codes
@tunintunin34175 жыл бұрын
Get a Kubota, Hydro over hydro, not el. over hydro junk...
@AndrewCamarata5 жыл бұрын
Yeah, that's been an ongoing problem. I would not want that system again.
@tunintunin34175 жыл бұрын
Andrew Camarata not sure about the Takeushi but they are JP made, must be good...
@AndrewCamarata5 жыл бұрын
I just got a IHI machine to replace that bobcat. I like it so far, but its been winter, I need to get more hours in it. I just had to put a computer in that bobcat, it was expensive.
@kmcwhq6 жыл бұрын
What an amazing bunch of BULLSHIT. Why in the world did a Skid Steer need to become as complicated as a friggin airplane? How is that better or safer than an old one without all the electronics?? Maybe Bobcat gets a million dollar discount on their liability insurance if they add 20 pounds of crap electronics to each machine......the customer pays for it anyway.
@AndrewCamarata6 жыл бұрын
I agree. No need for error code lights. Same with autos.
@darrellroeters49514 жыл бұрын
Still it's not Japanese made. Bobcat sucks sell.
@AndrewCamarata4 жыл бұрын
Still having problems with the AHC light, even after replacing an expensive computer. The machine does operate though.
@marexxx6663 ай бұрын
From your videos seems that BobCat breaks a lot. And a lot of times when they send you parts they are not correct ones. 🥲