Bobcat M-500 variable speed drive belt replacement

This is the same concept for other older Bobcat skid loaders of this series.
I had the bucket up and spark plugs out (to reduce compression) so the pulleys would move freely.
Approximate time needed, 2-1/2 hours (one person)
Tools needed:
3/4" wrenches
9/16" wrench
1/2" wrench
1/2" shallow socket and ratchet (nice to have a battery powered ratchet for the lock block bolts)
Pliers (to hold the hydraulic variable pulley fitting still when removing the hydraulic hose)
7/16" socket and ratchet
Preferably a strap wrench, a 5/8" or larger punch, and pry bar (to open driven pulley and rotate drive pulley)
If you have any other questions let me know and I will do my best to answer them.