Bobcat S185 Trouble Starting Looses Power to Displays

In this video I go thru the trouble shooting process to get this S185 back up and going.

[@toetoe6755]

excellent teaching for every one save times & save from some robbery place God bless you always thanks

[@destinywilliams7598]

This was exactly what my problem was!! Thanks for the video. Saved me so much headache and expense!! Bless you!

[@nashsummers8050]

Glad it helped!

[@audrey5575]

Same. Thanks ❤

[@paullemoine8379]

I have a 82 753 doing same thing I like this info on shows from bobcat !

[@RyanKuiken]

8iijiuuhhhuuy

[@victorhernandez769]

Thank you for the video gracias bendiciones...

[@michaeltoner2794]

I've had that cable go bad several times. They usually break rate on the end of the connection. I usually get a no start situation which will just click. If you test the battery it's at 12.83 volts when you sit in the machine and try to start it will dips down 5 volts making you think the battery is bad.

[@destinywilliams7598]

Thanks!

[@cr250rish]

My jd 2000 7775 is doing this right now has power until I try to crank then turn key to start position then all the lights and power go out

[@cr250rish]

Tried cleaning terminals and connections still running when it wants to

[@macbride33]

Where does the negative side of the 100 a fuse go?

[@nashsummers8050]

The fuse is inline so the positive from the battery to one side then the other side to the instrument panel, it’s not polarized.

[@macbride33]

@@nashsummers8050 I just cleaned both sides like you showed but still computer won't turn on...just flashes on for a second or 2, I hear a click, then turns off. Battery is new, cables tested, terminals cleaned, chassis ground is cleaned, started tested good. Now I'm thinking my panel is the culprit.

[@nashsummers8050]

@@macbride33 yep I’m guessing it’s in your panel as well. I don’t have any experience there. There is a nice Facebook Bobcat page where someone might know just search there.

[@darceyherrington3338]

Have you ever had over heating problems ? Or fan not running

[@nashsummers8050]

Darcey no I sure haven’t. So far so good.