Bobcat S70 w/ Teledyne Breaker. The Best in the West! California

[@Noez90]

I worked for a contractor in my teens that used buckets, shovels, picks to work with concrete with no machinery. Made me think this work was hell but I now realize he was hell and didn’t work smart like I see you do. Best in the west!

[@WestCoastCustomConcrete]

Man. You can only last so long doing it that way. Thank you for watching!

[@neckarsulme]

Your knowledge shows through on these narrated videos Anthony...Thank you for posting!

[@WestCoastCustomConcrete]

Thanks bro

[@fillowtree5505]

Nice video. Would love to see a equipment and truck tour. Keep the work coming.

[@WestCoastCustomConcrete]

Good idea. Thanks for watching!

[@clarkh4130]

Love the wheelies, I bet you own a dirt bike or did at sometime in the past.. you are the best, great work

[@WestCoastCustomConcrete]

Thanks bro

[@skijet12]

Buddy I just bought my first piece of equipment from hand digging to a s70 picking it up next week used but I'm first year owner second summer season I'm excited but nervous I'm like a little kid waiting for his toy now

[@WestCoastCustomConcrete]

Don't worry bro. I was like that too. Once you get started, hit the ground running 👊💯

[@dylanbreslin4977]

Just a point of clarification, that breaker is a Toku Striker breaker, not a Teledyne. Toku use to make the BTI breaker (TB Series) back when they were worth a darn. Now BTI's are Korean made and cant hold a candle to the Toku Striker. These Striker's are great breakers.

[@WestCoastCustomConcrete]

👍

[@tramac65]

Looking good...best in the West at it again!!

[@WestCoastCustomConcrete]

Thanks brother!

[@frankvargasIII]

Love the swagger. Odell complete concrete watch out! We are about to have a concrete contractor KZbin throw down!

[@WestCoastCustomConcrete]

👍

[@chadcaravaggio5701]

You're so full of yourself. Its awesome I respect the confidence!!

[@WestCoastCustomConcrete]

👍

[@christopherr7195]

By watching your videos other creators are recommended. Your best in the west title sounds off putting. But after watching. Best I’ve seen

[@WestCoastCustomConcrete]

Thanks bro 👊

[@johnfinau88]

Great job as always..how do charge for demo for concrete?

[@WestCoastCustomConcrete]

Thanks you! It depends, sometimes by the sqft and other times by the load.

[@fernandovillarreal2666]

You're a bad ass bro keep the videos coming

[@WestCoastCustomConcrete]

Thanks bro👊

[@eli8560]

Nice work my Muffin!

[@WestCoastCustomConcrete]

👍

[@pbrad36]

I love you're confidence

[@WestCoastCustomConcrete]

👊

[@kristinhouston7425]

The best in the west!

[@WestCoastCustomConcrete]

👍

[@Viralclown]

How do you stop the annoying bounce when turning on hard surfaces. Really difficult to be smooth. Even holding handles down the bottom

[@WestCoastCustomConcrete]

So true 👍 sometimes it helps with the bucket up💯

[@Viralclown]

@@WestCoastCustomConcrete thanks. Have you roller one yet? Seems really easy to do on uneven surfaces

[@WestCoastCustomConcrete]

@@ViralclownI have never rolled one. But I've heard a lot of people rolling them👍

[@Viralclown]

@@WestCoastCustomConcrete I noticed your wheels are narrow. The one I used has wider wheels. Sticks out from body.

[@WestCoastCustomConcrete]

@@Viralclown this is the smallest skid steer made. In So Cal back Yards are tight. Generally 36 in so this S70 fits👍

[@dianadipinto8391]

That’s the best in the west!!

[@WestCoastCustomConcrete]

👍

[@T.E.P.]

impressed how tuff that concrete was installed. no match for WCCC tho.

[@WestCoastCustomConcrete]

It was a total nightmare! It took way to long 👍

[@MrRyanlipp1980]

Does the bobcat S 70 have its own specific breaker that doesn’t fit any other models. So I guess my question is does breakers for bigger models do they fit the S 70?

[@WestCoastCustomConcrete]

No they have different size plates.

[@MrRyanlipp1980]

@@WestCoastCustomConcrete OK thanks so I guess instead of looking for a breaker I should be searching for a Plate to purchase

[@dgoconcreteinc6969]

Did you ever buy the new trailer ?

[@WestCoastCustomConcrete]

Not yet

[@sydneydipinto8844]

best in the west 👌

[@WestCoastCustomConcrete]

❤

[@TraeHenson]

Have you ever tied atlas copco breakers?

[@WestCoastCustomConcrete]

No I haven't

[@user-zu2bw7ig5v]

Another level!

[@WestCoastCustomConcrete]

👍

[@adanr150]

How much does your case track weigh that uses the 550 pound. ? And how thick can 300 pound break and 550?

[@WestCoastCustomConcrete]

The case runs around 5.800lb I can go through almost anything with the 550. The hammer I have for the s,70 now is 375lb and I hammer through 10in concrete.

[@WestCoastCustomConcrete]

Check out the more recent videos with the soosan SQ 25 hammer

[@adanr150]

@@WestCoastCustomConcrete what’s your flow rate? Or what do those require

[@WestCoastCustomConcrete]

@@adanr150 I'm not sure of the flow rate. Each size skid steer requires a certain pound hammer

[@adanr150]

@@WestCoastCustomConcrete what the website for soosan

[@wesjimez2941]

You operate this Bobcat so effortlessly. You could start your own school on how to operate these, and branch out your business. I've never seen anyone operate one of these like you. Anytime I see a concrete contractor working by me I tell them to watch your video's to see how a pro works.

[@WestCoastCustomConcrete]

Right on bro👊

[@danield8896]

How much better does this hit vs the HB680

[@WestCoastCustomConcrete]

I'd take either one. They're really close. Soosan is comping me a 375lb breaker for the s70. It kicks both of those breakers asses. I get it on Wednesday. I will do a video on it.

[@danield8896]

Cool can’t wait to see it hit

[@cmfyb]

Hey Anthony love you videos bro I can’t stress enough how informative they are. I’m 27 getting my contractors license in 2 months and want to get some equipment.i want to get an s70 with a dump trailer and in the video you said you just purchased this s70 so I was wondering how much you payed for it and your new dump trailer?And if maybe you can point me in the direction as to where you get yours?I’m in the Malibu- Santa Monica area . Any feedback will help. Thanks bro 🤘🤘

[@cmfyb]

And as far as the breaker would you recommend the soosan sq20 over the bti breaker you have in this video ?

[@WestCoastCustomConcrete]

Hey bro. Give me a call I can give more info. Also I can hook you up with a breaker👍

[@LWPowers]

I miss the five minutes of you putting your concrete pump hoses away. That is tremendously engaging content that none of your videos should be without.

[@nicksny]

How do these hammers compare to the OEM Bobcat hammers as far as performance and cost?

[@WestCoastCustomConcrete]

They are better. Check out my latest videos with a soosan SQ20 and a soosan SQ35. Now that's the top of the heap. Plus I can get you one dirt cheap👍

[@fredtillman3152]

I think I will hire the guy who built that planter.

[@WestCoastCustomConcrete]

Me to

[@danielmares7358]

Hey! Do you charge per square feet? If so how much or how do you charge? Looking to doing the same, any help is appreciated. Thank you.

[@WestCoastCustomConcrete]

$3 to $5 per SQ ft depending on the job 👍

[@wanyemerritt5517]

What would you say the tallest reach in feet on that s70

[@WestCoastCustomConcrete]

I'm not sure the height but that dump truck I'm loading is the max. If I want to load a super ten wheeler I either load it off of the curb or make a dirt ramp.

[@allthingsnm354]

Was gonna ask the same question does it reach over the high side dump trailer?

[@MrJaycob310]

How much does a breaker like that run???

[@WestCoastCustomConcrete]

I run a soosan they are around 6k

[@clayboist]

Keep the videos coming. Maybe if all of your equipment is together at one time, make a video, that'd be cool

[@WestCoastCustomConcrete]

I will for sure! Thanks bro

[@xXBuckOFiveXx]

You do great work but you need to stop tooting your own horn throughout every video. It gets old fast.

[@Slovenlyone]

West Coast Custom Concrete I was thinking the same thing about taking it easy on tooting your own horn... but I like how you didn’t get all offended by that comment, you seem like cool 😎 peeps.

[@WestCoastCustomConcrete]

@@Slovenlyone I appreciate your opinion. Thanks for watching!

[@jesusortiz9866]

ur guys do great work but if you would’ve used a full size bobcat could’ve had that broken out an hauled in bout couple hrs

[@bulldog24s]

I watched like 4 videos of this guy. All he talks is . Me,Me,Me. Bragging

[@manneroo]

That could be because its his business and he's fantastic at what he does. If it upsets you so much, you could mute the sound - or just not watch.

[@adanr150]

Website for hammer

[@WestCoastCustomConcrete]

His name is max. His # is in the disscription.

[@roczilla6834]

👏🏽👏🏽👏🏽

[@donaldloos2049]

How does the homeowner like all those tire marks on his driveway ?

[@rchavez5056]

I thought the same thing. I wouldn't like it.

[@Boysinda]

Dude they hose right off with water and a push broom nothing to worry aboutb

[@donaldloos2049]

Ya fn right they do , lmao .

[@Boysinda]

Donald Loos dude your an idiot what do you know about equipment and running a business

[@head7502]

Bobcatboy012 I know they don’t just wash right off with a hose and a broom like magic. I’ve been running bobcats for 25 years. Also you shouldn’t call someone an idiot and assume they know nothing about equipment and business cause they said something that’s true.

[@donaldloos2049]

Be careful with that bucket tilt back like that and popping wheelies, one day a piece is going to fall in the cab .

[@Boysinda]

Donald Loos shut up you can’t operate. Come work for my company you wouldn’t last

[@donaldloos2049]

I’m a 3rd generation concrete guy you pos, 30+years experience . I forgot more than you’ve learned. I hope a piece falls on both of you dumb fucks so you learn. People on the internet hate criticism lmao. If someone gives me advice I soak it in like a sponge not get defensive like a lil pussy .

[@Boysinda]

Donald Loos lol you suck bro where’s your laser screed oh wait you don’t have one because you don’t pour as much concrete as my company when you pour 500 yards a day come to North Carolina you won’t be able to keep up with my guys been at it 30 years little boy hehehe

[@Boysinda]

Donald Loos btw I’m a first generation I didn’t get a company handed down to me like you did I started it in my own donnyyyyy boyyyyt

[@donaldloos2049]

Me neither bud , my dad made me start my own . Took a 40k loan out at26 , invested 40k of my own invested in some marketing and did the damn thing while taking care of him while he suffered from multiple strokes for the first five yrs till he died.Nothing was given to me , not even his contacts or customers. Bobcat boy ! Not even a piece of equipment.